Securitron AQ Series
Power Supplies
Product Overview
With a wide range of options, ASSA ABLOY has the power solution to fit your every need, from wall to rack mounted solutions
Power supply selection is often one of the last decisions made when designing an electrified access control solution. However, selecting the right power supply is as important as choosing the right locking devices and accessories that may be connected to it.
Securitron power supplies offer clean, efficient and reliable power solutions for any application, including options for high efficiency sustainable locking solutions. Available in configurations to support the smallest single door systems to the largest enterprise access control systems.
•For a low power solution, Securitron EcoPower® reduces standby power supply consumption by 99%; EcoPower is designed to work with low-power electrified access control devices
•Power over Ethernet extractors and injectors provide integrated power and data over low-cost CAT-5 cabling
•Linear power supplies offer multiple low noise power options for sensitive electronics
•Rack mounted power supplies offer a valuable space-saving solution to provide power to access control devices such as electrified door hardware and more
•Switching power supplies are a more cost effective, energy efficient solution for access control systems; Available in wall mount and rack mount options
•Power transfers assist in the secure transfer of power and/or data from the frame
to electrified hardware on the door
AQD6 Power |
Door |
||
Supply |
Controller |
||
|
|
|
|
J-Box
M32/M62
Armored
Door Cord
DK-37
Keypad
TSB
Let ASSA ABLOY help determine which power supply will meet your exact requirements for any new or existing electrified access control solution.
The Securitron AQ Series of switching power supplies are dual (AQD),
and single (AQS) voltage supervised units with a battery charger designed to power magnetic locks, electric strikes, card readers, sensors, access control boards and other devices in access control systems. The AQ Series can also be used to power DC cameras and other DC locking equipment. These units provide field selectable dual (AQD) or single (AQS) 12 or 24 VDC with up to 16 independently controlled power limited outputs.
EXIT ENTRY
Protection | Efficiency | Support
Protect and enhance the performance of access control devices and systems with Securitron AQ Power Supplies.
Mix & Match UL Listing
•Available in one to 16 Amp variants to support the smallest single door systems to the largest enterprise access control systems
•UL listed dynamic field configurable product offering
•Combine any of the seven power supplies and nine distribution boards in any UL listed enclosure and maintain UL code compliance
Protection & Efficiency
•Heavily filtered and regulated output provides better-than-linear performance
•Up to 93% efficiency, which results in decreased operating costs which lengthens the lifespan of electronics
•Low battery cutoff protects readers and other sensitive components from under-voltage
Friendly & Knowledgeable Support
•Customer Service and Technical Support offer tools and resources to address questions of all shapes and sizes
•Free, custom wiring diagram support available
•No-fault, no questions asked warranty covers installation errors
Specifications
Certifications (Both)
•UL294 Listed
•UL603 Listed
•ULC-S318 Listed
•ULC-S533 Listed
•RoHS Compliant
•REACH Compliant
Electrical
•115 or 230 VAC input (except AQD1)
•Supports up to two (2) sealed gel, AGM or wet lead acid batteries
•Up to 93% efficiency
•Low noise design with ripple as low as 70mV p-p
•Outputs are Class 2 limited when used with PTC polyswitch distribution boards
•Dual voltage 12 or 24 VDC field selectable continuous output
•Single voltage 12 or 24 VDC continuous output
Operating Temperature
• -4° to 122°F [-20° to 50°C]
Dimensions
Shipping Weight
• 12.7 lbs [5.76kg]
Features
•All combinations of AQ power supplies and distribution boards are UL Listed
•Tolerates brownout or over-voltage input ± 15% of nominal voltage
•Thermal shutdown protection with auto restart
•Circuit breaker protects against over-current and reverse battery faults
•Integrated or dedicated battery charging circuit prevents over-voltage on locking devices
•Expandable up to 16 outputs in the standard enclosure
•Available with a single relay fire trigger or individually triggered relayed outputs
•Low battery cutoff at 9V for all except AQD1*
*Battery disconnect module available. Please contact the factory.
•14" x 14" x 4-3/4"
[355.6mm x 355.6mm x 120.65mm]