Seco-Larm SK-4131-SPSQ Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright © 2017 SECO-LARM U.S.A., Inc. All rights reserved. All trademarks are the property of

SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason,

SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_SK-4131-SPSQ_170303.docx

Split Series Keypad with Proximity Card Reader

SK-4131-SPSQ

Proximity Card Reader, 1,200 Users

 Split series installation for added security – keypad and controller are

separate thereby preventing access via keypad tampering

 Built-in current limited (750mA) power source for keypad for added security
 Simple three wire connection between keypad and controller
 12~24 VDC Auto-adjusting operation
 Possible user codes and/or proximity cards:

- Output #1: 1,000 (000~999)

- Output #2: 100 (001~100)

- Output #3: 100 (001~100)

 Up to 50 (01~50) possible temporary visitor codes, which can be

programmed for one-time or limited-time use (1~99 hours)

 Up to 50 (01~50) duress codes for output #1, 10 (01~09) for output #2,

10 (01~09) for output #3

 EEPROM Memory protects programmed information in case

of power loss

 Keypad illuminates when a button is pressed; backlight can be

programmable for FULL or AUTO in standby mode

 Keypad mounts to a standard single-gang back box

(surface-mount back box included)

 All features are programmed directly from the keypad:

No need for an external programmer

 Programmable egress input with optional warning alarm and

delayed egress

 Door sensor input for anti-tailgating operation
 Interlocking input for connecting to a second keypad

for mantrap applications

Features:

Specifications:

Operating voltage

12~24 VDC

Current draw
(at 12VDC)

Standby

88mA

Keypress

115mA

Output 1 active

115mA

Output 1 & 2 active

128mA

Output 1, 2, & 3 active

138mA

Total max current draw

220mA

Outputs

#1—Form C

5A@24VDC

#2—Form C

1A@24VDC

#3—Form C

1A@24VDC

Alarm

100mA@24VDC

Key active

100mA@24VDC

Duress

100mA@24VDC

Interlock

100mA@24VDC

Tamper

50mA@24VDC

Inputs

Egress

N.O. Ground

Door sensor

N.C. Ground

Door inhibit

N.O. Ground

Doorbell

N.O. Ground

Tamper

N.C. Ground

Proximity reader frequency

125kHz (EM 125)

Proximity reader sensing distance

11/2" (38mm)

Operating humidity

5~95% (non-condensing)

Operating temperature

-4°~158° F (-20°~70° C)

Weight

Keypad

6.3-oz (180g)

Controller

8.8-oz (250g)

11/4" (32mm)

43/4"

(120mm)

Operation

37/16"

(87mm)

Proximity

Card Reader

45/8"

(117mm)

27/8"

(73mm)

11/2"

(38mm)

5

Illuminated

Keys

Dimensions:

Keypad

Controller

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright © 2017 SECO-LARM U.S.A., Inc. All rights reserved. All trademarks are the property of

SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason,

SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_SK-4131-SPSQ_170303.docx

Sample Application:

Keypad Status Buzzer and LEDs:

Status

Sounds

Amber LED (Center)

In programming mode

-

Steady ON

Successful key entry

1 Beep

1 Flash

Successful code/card entry

2 Beeps

2 Flashes

Unsuccessful code/card entry

5 Beeps

5 Flashes

Power up delay

Continuous beeping for

1 minute

Continuous flashing for

1 minute

Output relay activation

1-Sec long beep

-

In standby mode

-

1 Flash/sec

System restore mode

2 Beeps

Fast flashing for 2.5 min

Code / card already stored

1 Long beep

-

Real time clock stopped after
power loss

Continuous 3 fast beeps

every 5 seconds

-

Keypad link-up with
controller failed

Continuous beep

every 1.5 seconds

-

Green/Red (Left)

Amber LED (Center)

Green/Red LED (Right)

Steady

Available for free

connection (Green)

Keypad locked (Red)

Output #1 inhibited (Red)

Programming mode

Output #1 activated (Green)

Output #2 activated (Red)

Flashing

Inhibit mode paused (Red)

Standby mode

-

Keypad Sounds and LEDs

LED Indicators – Keypad

Red/Green

Red/Green/Amber

Red/Green