Seco-Larm SK-1323-SPQ, SK-1323-SDQ Specsheet
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.
r their respective owners.
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Sealed-Housing Weatherproof Keypads
Specifications:
SK-1323-SDQ Stand-Alone Keypad
SK-1323-SPQ Stand-Alone Keypad with Built-In Proximity Reader
SK-1323-SPQ shown
Dimensions:
3” (76mm)
7
/8” (22mm)
43/4”
(120mm)
2” (50mm)
35/16”
(84mm)
31/2”
(90mm)
Features:
SK-1323-SDQ
SK-1323-SPQ
Operating voltage
12~24 VAC/VDC
Standby
40mA@12VDC
Active
70mA@12VDC
Output #1
1A@30VDC, For m C, NO/NC/COM
Output #2
1A@30VDC, For m C, NO/NC/COM
Input #1
N.O. ground
Input #2
N.O. ground
Door sensor input
N.C. ground
Tamper sensor
Optical
Operating temperature
-4°~122° F (-20°~50° C)
Keypad LED li fe
60,000 hours (over 6.8 year s)
Weight
1-lb 2-oz (510g)
Proximity r eader frequency
N/A
125kHz
Proximity r eader distance
N/A
115/16” (5cm)
1,010 Users (Output #1: 1,000 users, Output #2: 10 users).
SK-1323-SPQ only:
•
• 2 Form C relay outputs.
• Each relay has programmable output time from
1~99 seconds or toggle.
• Output #2 can be programmed for use with a doorbell.
• 2 Egress inputs and 1 door sensor input.
• Backlit keys for easy nighttime use.
• 2 Multi-colored status LEDs
• All features are programmed directly from the keypad—no need for an
external programmer.
• EEPROM protects programmed information in case of power loss.
• Optical tamper sensor for added security.
• Circuitry is potted with epoxy for outdoor use.
• Weatherproof (IP65).
• Rugged aluminum construction.
• Built-in 125kHz proximity reader.
• 3 Programmable access modes for Output #1:
Card Only, Card or
• Output #2 may have either a card or a code programmed
Code, and Card with Code.
for each user.
Current draw
Relay outputs
Egress inputs
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
All trademarks are the property of SECO-LARM U.S.A., Inc. o
PiSK-1323-SxQ.docx
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.
r their respective owners.
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: (949) 261-2999 | (800) 662-0800 Fax: (949) 261-7326
Website: www.seco-larm.com Email: sales@seco-larm.com
Sample Wiring:
Left LED
Right LED
Keypad Status
OFF
Green
Power ON
OFF
Orange
Programming Mode
Green
Orange flashing
Waiting to program code/card* (card+code access mode)
Red
Orange flashing
Code/card* already present
Green
Green
Relay 1 activated
Red
Green
Relay 2 activated
Orange
Green
Relay 1 and 2 both activated
Orange
Orange
Restoring factory defaults
Green/Yellow flashing
Green
Waiting for code/card entry* (card+code access mode)
OFF
OFF
Power OFF / Clearing user codes
Status LEDs:
*Card operation with SK-1323-SPQ only.
Also Available from SE CO-LARM:
SK-1123-SQ
Weatherproof
SK-1123-FQ
Weatherproof
SK-2323-SDQ
Weatherproof
available
SK-1011-SQ
Indoor use
SK-1311-SQ
Backlit Keys
Proximity Cards or Tags
PR-K1S1-A
PR-K1K1-AQ
Red—12~15 VDC
Orange—Egress Input 1
Green—Earth
Black—12~15
Pink—Output #1
Yellow—Egress Input 2
White—Output #1
Aqua—Output #1 (N.C.)
Blue—Output #2
Purple—Out put #2
Gray—Output #2
To Earth Ground
Electric Strike
N.O
N.C
Alarm
Panel
Egress
Button
Egress
Diode
MOV
12~24
VAC/VDC
Power
Supply
Button
Control
Status LEDs
Outdoor Stand-Alone Keypad
110 Users
2 Relays
Surface mount
Indoor Stand-Alone Keypad
100 Users
1 Relays
Outdoor Stand-Alone Keypad
110 Users
1 Relay
Flush mount
Illuminated Indoor Keyp ad
120 Users
2 Relays
Mullion-Style Keypad
1,010 Users
2 Relays
Prox-reader
(Sold in packs of 10)
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
All trademarks are the property of SECO-LARM U.S.A., Inc. o
PiSK-1323-SxQ.docx
Loading...