Seco-Larm SK-1131-SQ Comparison

A

A

A

A

–

A

–

–

–

A

A

A

A

A

Features:

Master Code 1 (4~8 digits) 1 (4~8 digits)
Super User Code 1 (4~8 digits) N/A

Common User Codes

User Codes/Cards*

Visitor Codes 50 (4~8 digits) N/A

Duress Codes

Output Mode and Timing

Real-Time Clock
Output #1 Auto-Disable Time Yes N/A
Wrong-Code System Lock-Up 60-second lockout, Duress output, 15-min lockout, off 30-second lockout, Duress output, 15-min lockout, off

User Code Entry Mode
Keypad Sounds

Output Relay Activation Sounds
Center LED Programming
Door-Forced-Open Warning and Timing
Door-Propped-Open Warning and Timing
Door Open Alarm and Timing
Egress Output Yes (with multiple features) Yes (basic)
DAP
System Restore

*Proximity card reader only on SK-1131-SPQ

Comparison Chart: SK-1131-SPQ & SK-1131-SQ

Product SK-1131-SPQ SK-1131-SQ

Output 1 1 (4~8 digits) N/A
Output 2 1 (4~8 digits) N/A
Output 3 1 (4~8 digits) N/A
Output 1 1000 (mix of 4~8 digit user codes and proximity card/fobs) 100 (4~8 digits)
Output 2 100 (mix of 4~8 digit user codes and proximity card/fobs) 10 (4~8 digits)
Output 3 100 (mix of 4~8 digit user codes and proximity card/fobs) 10 (4~8 digits)

Output 1 50 (4~8 digits)
Output 2 10 (4~8 digits)
Output 3 10 (4~8 digits)
Output 1 Up to 99,999 seconds (~28 hrs), toggle Up to 999 seconds (~17 min), toggle
Output 2 Up to 99,999 seconds (~28 hrs), toggle Up to 999 seconds (~17 min), toggle
Output 3 Up to 99,999 seconds (~28 hrs), toggle Up to 999 seconds (~17 min), toggle

Yes N/A

uto (no #, same length codes)

or manual (#, variable length codes)

On/Off On/Off

No beeps, 1-second beep, 2 short beeps 1-second beep/2 short beeps

On/Off On/Off
On (up to 999 sec)/Off On/Off
On (up to 999 sec)/Off On (up to 999 sec)/Off
On (up to 999 sec)/Off N/A

Code (no jumper) Jumper

Yes Yes

dd 2 to user code
dd 2 to user code
dd 2 to user code

uto (no #, same length codes)

or manual (#, variable length codes)

Specifications:

Operating voltage 12~24 VAC/VDC 12~24 VAC/VDC

Current draw
(at 12VDC)

Outputs

Inputs

Proximity reader frequency 125kHz (EM125) N/A
Proximity reader sensing distance 1 1/2" (38mm) N/A
Operating temperature -4°~158°F (-20°~70°C)
Operating humidity 5~95% Non-condensing
Dimensions (including back box) 4
Weight 6-oz (170g) 6.3-oz (180g)

Included accessories

Product SK-1131-SPQ SK-1131-SQ

Standby 66mA 10mA
Keypress 93mA <30m
Output 1 active 99mA <80m
Output 1 & 2 active 126m
Output 1, 2, & 3 active 127m
Total max current draw 160m
#1 - Form C 1A@30VDC 5A@28VDC
#2 - Form C 1A@30VDC 1A@28VDC
#3 - Transistor ground 100mA@24VDC 100mA@24VDC
K or A 100mA@24VDC 100mA@24VDC
Duress 100mA@24VDC 100mA@24VDC
Interlock 100mA@24VDC 100mA@24VDC
Tamper 50mA@24VDC 50mA@24VDC
Egress N.O. Ground N.O. Ground
Door sense N.C. Ground N.C. Ground
Door inhibit N.O. Ground N.O. Ground
LEDs Green/Red Green/Red/Aux

5

/8”x27/8”x11/2” (117x73x38 mm) 45/8”x27/8”x11/2” (117x73x38 mm)

Back box, diode, manual, 2x installation screws,

2x mounting screws

<130mA

Back box, diode, manual, 2x installation screws,

2x mounting screws

Phone: [phone] | [phone] Fax: [phone]

16842 Millikan Ave, Irvine, CA 92606

The SECO-LARM po licy is one of continual development. For that reason, SECO-LARM reserves the right to

change prices and specificat ions without notice. SECO-LARM is not responsible for misprints.

Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.

Website: www.seco-larm.com Email: [e-mail]

PiSK-1131-SPQ_CompariosonChart150826.docx