Seco-Larm SK-1123-FQ, SK-1123-SQ Comparison
x
eatures
Illuminated Outdoor Access Keypads
SK-1123-SQ 110 Users, 2 Outputs (2 Relays), Surface-Mount
SK-1123-FQ 110 Users, 2 Outputs (1 Relay, 1 Transistor Ground), Flush-Mount
ENFORCER outdoor access keypads are weatherproof and rugged,
making them ideal for indoor and outdoor applications.
F
X Each relay can be programmed for momentary
(1~999 seconds) or latch.
X Code flexibility: Each code can be 4~8 digits long.
X Egress input for exiting the premises.
X Dual voltage: 12~24 VAC/VDC operation.
X Tamper switch: N.C. Dry contact 3A@12VDC.
X Mantrap: For a protected area with two doors, this feature
:
allows only one door to be open at any time.
X All features are programmed directly from the keypad,
eliminating the need for an external programmer.
X Duress output: Signals a silent alarm if an authorized user
is forced to open the door under duress.
X Door-forced-open and door-propped-open alarm output.
X Keypad can be programmed to emit beeps for key presses
or operate in silent mode.
X Programmable LED keys: Full-time ON, ON when keys are
pressed, Full-time OFF; suitable for solar applications.
X Auto or manual code entry checking:
• Auto: No # key required after each code.
• Manual: # key must be pressed after every code.
X Anti-Tailgate: Auto-relock to prevent tailgating.
SK-1123-SQ
Also Available from SECO-LARM:
SK-2123-SQ SK-3123-SQ
SK-1011-SQ
SK-1131-SQ
Outdoor Mullion-Style
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights Reserved.
The SECO-LARM policy is one of continual development. For that reason SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
SECO-LARM
1-800-662-0800
16842 Millikan Avenue, Irvine CA 92606 1-949-261-2999 Fax: 1-949-261-7326
Keypad
®
Rugged Outdoor
Keypad
Indoor Keypad
Tel:
Illuminated
Indoor Keypad
Email: info@seco-larm.com Website: www.seco-larm.com
SK-1123-FQ
pi-SK-1123.doc
x
(
)
(
)
(
)
(
)
(
)
(
)
Dimensions:
-
-
-
-
2”
51mm
43/4”
415/16”
(125mm)
45/8”
118mm
120mm
31/8”
78mm
Specifications:
SK-1123-SQ SK-1123-FQ
Operating Voltage 12~24 VDC/VAC
Current
Draw
Relay Output
Transistor Ground Output N/A 100mA@24VDC
Egress N.O. Ground
Door Sensor Input N.C. Ground
Weight 18-oz (510g) 11-oz (300g)
Standby 15mA@12VDC 10mA@12VDC
Key Pressed 45mA@12VDC 45mA@12VDC
Relay Active 130mA@12VDC 100mA@12VDC
Relay #1 5A@28VDC 5A@30VDC
Relay #2 1A@28VDC N/A
113/16”
45mm
Comparison:
SK-1123-FQ SK-1123-SQ
Number of Users 110 110
Number of Outputs 2 2
Backlit Keys Yes Yes
Tamper Switch Yes Yes
Door Unlocked Annunciation Yes Yes
Request-to-Exit Input Yes Yes
Main Relay Lockout (Inhibit) Yes Yes
Mantrap Yes Yes
Door-Forced-Open Warning Yes Yes
Door-Propped-Open Warning Yes Yes
Door Auto Relock Yes Yes
Alarm/Duress Output Yes Yes
Key Activation Output No Yes
Type of Mounting Flush Surface
31/8”
80mm
5
/8” (15mm)
115/16”
(46mm)
123/32”
(31mm)
25/8”
(66.5mm)
(Back box)
(35mm)
11/8”
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights Reserved.
The SECO-LARM policy is one of continual development. For that reason SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
1-800-662-0800
16842 Millikan Avenue, Irvine CA 92606 1-949-261-2999 Fax: 1-949-261-7326
Tel:
Email: info@seco-larm.com Website: www.seco-larm.com
pi-SK-1123.doc
Loading...