Seco-Larm SD-9963-KSGQ Specsheet

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright 2014 © SECO-LARM U.S.A., Inc. All rights reserved.

r their respective owners.

LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

Post-Mount No-Touch Sensor
with Access Box

SD-9963-KSGQ

Features:

Specifications:

Operating voltage

12~24 VDC

Current
Standby

16mA@12VDC / 25mA@24VDC

Triggered

Relay type

Form C dry contact, 1A@30VDC

Response time

10ms

Standby

Red1

Triggered

Green1

Output time

0.8~30 s or toggle

Range

IP Rating

IP652

Temperature range

-4°~131° F (-20°~55° C)

Weight

1-lb 9-oz (710g)

Size

4”x5½”x3” (102x134x77 mm )

Color function reversible

Front panel only

Wiring Diagram:

Override button is factor y prewired,

Manual override

COM: N.O.

The ENFORCER Post-Mount No Touch
Sensor with Access Box is a full-featured
exit plate that uses IR technology t o allow
egress from a protected area or activate a
device with the simple wave of a hand.

• Adjustable sensor range up to 7" (18cm)

• Weather resistant for outdoor use

• Stainless-steel face-plate

• Hinged plate easily removes from box for easy wiring

• Adjustable trigger duration 0.8~30 seconds or toggle (ON/OFF)

• Form C relay, rated 1A@30VDC

• Operating voltage: 12~24 VDC

• Gooseneck- or wall-mountable

• Manual override button

• LED-illuminated sensor area for easy identification

• Selectable LED colors (turns from red to green or green to red)

on sensor activation

• Includes heavy-duty steel box

button

no further wiri ng necessary

SECO-LARM

®

draw (max.)

LEDs

1

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-

All trademarks are the property of SECO-LARM U.S.A., Inc. o

25mA@12VDC / 32mA@24VDC

2”~7” (5~18 cm)

2

PiSD-9963-KSGQ_141226.doc.docx