Seca 882, Seca pragma 883 Instruction Manual And Guarantee

www.balances.com Your Authorized Seca Dealer
seca pragma 883
D
GB
F
I
E
Instruction manual and guarantee
1. Congratulations!
www.balances.com Your Authorized Seca Dealer
In the seca 882/seca pragma 883 elec­tronic personal scale you have purchased a highly-accurate piece of equipment which is also sturdy, easy to look after and space-saving.
seca has been putting its experience at the service of health for over 150 years, and as market leader in many countries of the world, is always setting new standards with its innovative weighing and measuring developments.
A patented system allows seca electronic personal scales to determine weight more accurately than ever before. They have a
number of supplementary functions in addition to the conventional determination of weight.
For example, by taking height into ac­count, they can help determine and achieve your personal ideal weight and check how close you are to your target weight.
For use in orthopaedics, limit values can be set for strain. An acoustic signal pro­vides warning of excessive strain.
The Pre-Tare function automatically de­ducts an additional weight and displays the result.
2. Safety
Before using the new scale, please take a little time to read the following safety instruc­tions.
seca 882/seca pragma 883 electronic personal scales are designed for private use and for use in public institutions.
• Follow the instructions in the instruc­tions for use.
• Use only the type of battery stated (see „Changing the batteries“ on Page 32).
• Do not drop the scale or subject it to violent shocks.
• Route the cable between the weighing platform and the housing so that there is no risk of people tripping over it.
• Ensure that the cable is not crushed and does not come into contact with hot objects.
• Have repairs carried out only by author­ised persons.
3. Before you start
Unpacking
– Remove the packaging and place the
scale on a firm, level surface.
The scope of supply includes:
• scale with display casing
• wall bracket
• desk-top stand
• batteries in holder
Model 882/pragma 883 19
GB
Desk-top stand
www.balances.com Your Authorized Seca Dealer
– Position the desk-top stand on the dis-
play casing from underneath. The broad side must be located at the top of the display. The desk-top stand locks in position.
– Place the display casing on a desk-top.
Wall bracket
– Place the desk-top stand on the display
casing from underneath. The narrow side must be located at the top of the display. The desk-top stand locks in position.
– Fit the wall bracket to the wall at the de-
sired height.
– Push the display casing onto the wall
bracket.
Power supply
The scale is powered exclusively by batteries. The scale works independently of the mains, which is very handy for mobile use.
The LC display has a low power consumption – 80.000 weighing operations can be per­formed with one set of batteries. When the battery voltage is no longer adequate, appears in the display.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards “Battery” and open the cover.
– Connect the cable to the holder and
batteries.
– Place the holder in the battery com-
partment.
– Close the cover and then turn the scale
back up the right way.
bAtt
20
4. Operation
www.balances.com Your Authorized Seca Dealer
Controls and displays
The controls and display are in a casing separate from the scale. This casing is connected to the weighing platform by a 3-metre cable.
Switch scale on and off
press briefly s switch between kg and lbs
hold down s switch between kg and sts
in function menu s increase value, scroll
press briefly s activate hold function
hold down s set display to zero
in function menu s decrease value, scroll
Menu select, confirm, set damping system
Memories
seca 882 seca pragma 883
FU 1 Body-Mass-Index (BMI) Body-Mass-Index (BMI) FU 2 Limit value Broca ideal weight FU 3 Pre-Tare Target weight
Model 882/pragma 883 21
GB
Correct weighing
www.balances.com Your Authorized Seca Dealer
– Press the Start key.
se(a, 8.8.8.8.8. and 0.00 appear consec-
utively in the display. The scale is then au­tomatically set to zero and ready to use
– If necessary, switch the weight display
(see Page 23). – Stand on the scale and keep still. – Read the weighing result off the digital
display. – If a load greater than 200 kg, 440 lbs or
31 sts is placed on the scale,
pears in the display. – To switch off the scale, press the Start
key again.
Information about weighing
• Ideally weigh yourself daily, always at
the same time and wearing similar
clothes (e.g. when you get up in the
morning).
• Make a note of your weight for several
days running (e.g. a week).
• At the end of the week, add all the
weights together and divide the total by
the number of days.
Calculating your average weight over
several days takes account of normal
weight fluctuations. These fluctuations
arise as a result of the accumulation or
loss of water, e.g. after sport. They do
not represent true weight loss or gain.
Calculating a weekly average weight
evens out these fluctuations.
St0P ap-
Example:
Sunday: 88,0 kg Monday: 87,8 kg Tuesday: 88,2 kg Wednesday: 88,2 kg Thursday: 88,6 kg Friday: 88,4 kg Saturday: 88,2 kg
617,4 kg
617,4 kg : 7 = 88,2 kg average weight for the week
22
Switching the weight display
www.balances.com Your Authorized Seca Dealer
The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be­tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/lbs/sts key
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the kg/lbs/sts key for approx. 2 seconds.
– The lbs or sts display lights up.
Automatic switch-off/economy mode
The scale switches off automatically after 5 minutes.
5. Supplementary functions
The seca 882 and seca pragma 883 electronic personal scales have a number of sup- plementary functions in addition to the conventional determination of weight.
seca 882 seca pragma 883
FU 1 Body-Mass-Index (BMI) Body-Mass-Index (BMI) FU 2 Limit value Broca ideal weight FU 3 Pre-Tare Target weight
Model 882/pragma 883 23
GB
Loading...
+ 11 hidden pages