Scotts HF-636P Quick Start Manual
STEREO 3CD MINI HI-FI SYSTEM WITH PLL RADIO CASSETTE AND TURNTBLE
Quick Start Guide
MODEL : HF-636P
Insert the Plastic Cover Bracket into the black Hinge
Slots .
Push both turntable deck Hinges backwards .
i
i i
ii ii
i i
i
ii
C
Mounting the lid
6
4
1
2
3
5
MMC
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
Do not cover any vents and make sure that there is a
space of several centimeters around the unit for
ventilation.
B
Placement
Unpack all parts and remove protective material.
Checking the supplied accessories
A
Contents of the box
Quick Start Guide
Remote Control
Manual
Plastic Cover Bracket
Main Unit
2 speakers
1
2
3
4
5
6
Thank you for choosing this audio device.
Push them down firmly into the hinges to complete the
installation.
Right Speaker Left Speaker
Insert the speaker cable ends (exposed wires) into the
terminals located on the back of the main unit by
pushing down the lever of the left speaker terminal and
then the right speaker terminal.
Connect the left speaker to the left speaker terminals
with the red wire to L+ and the black wire to L -.
Connect the right speaker to the right speaker terminals
with the red wire to R+ and the black wire to R -.
D
Speaker connection
NOTE: Make sure that the power is turned off when
connecting or disconnecting the speakers. Make sure
that the speakers are connected to the correct terminals.
Red
Black
MMC
NOTE: The product is designed to operate on normal
230V ~ 50Hz AC only. Connecting this system to any
other power supply could result in damage to the unit.
Press down the “ON/STANDBY Button” to turn the
system on. If the LCD display is on with backlighting, it
means the power supply is normal. Now the system is
ready to play the music.
F
Turn on the power
Please read the user manual completely before
operating this unit.
G
Read the user manual
If you find your unit switches itself off regularly, this is not a fault.
Due to the ErP Stage 2 requirements below for power saving
measures, a unit which is connected to the mains power will switch
itself off automatically if no music has been playing for over 15
minutes.
Switch the unit OFF and after 5 seconds to ON again to re-activate it.
AC Plug
AC Outlet
After connecting the speakers unwind the AC power
cord fully and connect it to any convenient household
230V ~ 50Hz AC outlet. To prevent electric shock, match
wide blade of plug to wide slot. Fully insert the plug to
main power socket.
E
Connecting the AC power cord
IMPORTANT PRODUCT INFORMATION
ErP2 – NEW EUROPEAN DIRECTIVE – FROM JANUARY 2013
The Energy - related Products Directive ErP2 impacts all
energy-related products sold within the EU.
To improve energy efficiency and environmental protection, the
ErP2 Directive, which is a European legislation as part of CE
marking, applies to products that affect energy consumption
during use.
From January 2013 this Directive requires Manufacturers and / or
Importers to offer products designed to reduce their overall
impact on the environment, including the resources consumed
during use, manufacture and disposal.
Loading...