Schneider Electric Smart-UPS RTD Installation Guide

Installation Guide Smart-UPS RTD 5/6 kVA RMXLP Hardwire Kit and Optional PDU

su0591a

Safety Information

Adhere to national and local electrical codes when wiring this unit.

Qualified/licensed electrical personnel should wire this unit.

Disconnect equipment connected to the UPS.

1. Press the OFF button located on the front of the UPS.

2. Disconnect one battery module.

3. Disconnect the UPS from the utility power. Disconnect methods will vary depending on your unit configuration.

– Unplug the UPS from the wall receptacle. – Switch the utility circuit breaker OFF.

Your UPS model may vary from the model depicted in the diagrams. The PDU installation procedure is identical for all models.

Default SURT014 SURT015

suo0593a

suo0579a

SURT016 SURT017 SURT018

suo057 7a

suo0580a

suo0578a

990-3348A 05/2009

Installation Guide Smart-UPS RTD 5/6 kVA RMXLP Hardwire Kit and Optional PDU

Output Hardwire Instructions

suo0550a

suo055 1a

suo0592a

suo0574a

suo057 5a

suo057 6a

Red

suo0549a

suo0568a

suo0553a

Input Hardwire Instructions

suo0568a

suo0582a

suo0589a

Black

White

990-3348A 05/2009