Schneider ATV12H037M2, ATV12H055M2, ATV12HU22M2, ATV12H075M2, ATV12H018M2 User Manual

ANNEX
S1A5868402
ANNEX for ATV12
Quick Start Guide

Short Circuit Current Ratings (SCCR) and branch circuit protection

Recommended fuse ratings for UL and CSA requirements. Components for use together in accordance with standard UL508
ATV12 are provided with integral overload and over-speed protection for the motor after activation of the function [Motor thermal state memo]
MtM. (For more information refer to the ATV12 User manual BBV28581).
Input Voltage
+10%/-15%
60 Hz
Y
120 V,
1 phase
240 V,
1 phase
240 V,
3 phase
240 V,
3 phase
ATV12 Drive
(kW) (HP) input
withstand
Rating (kA)
0.18 0.25 1 ATV12H018F1 yes yes yes 10 1 GV2P10 1 Ferraz HSJ (15) 1
0.37
0.75
0.5 1ATV12p037F1 yes yes yes 20 1 GV2P14 1 Ferraz HSJ (25) 1
1 1 ATV12H075F1 yes yes yes 25 1 GV2P20 1 Ferraz HSJ (40) 1
0.18 0.25 1 ATV12H018M2 yes yes yes 10 1 GV2 P08 1
0.37
0.5 1ATV12p037M2 yes yes yes 10 1 GV2P10 1 Ferraz HSJ (15) 1
0.55 0.75 1 ATV12p055M2 yes yes yes 15 1 GV2P14 1 Ferraz HSJ (25) 1
0.75
0.18 0.25 5 ATV12H018M3 yes yes yes 10 5 GV2P07 5
0.37
0.75
0.18 0.25 5 ATV12H018M3
0.37 0.5 5 ATV12
0.75 1 5 ATV12
1 1ATV12p075M2 yes yes yes 20 1 GV2P14 1 Ferraz HSJ (25) 1
1.5 2 1 ATV12HU15M2 no no yes 25 1 GV2P20 1 Ferraz HSJ (40) 1
2.2 3 1 ATV12HU22M2 no no yes 35 1 GV2P22 1 Ferraz HSJ (45) 1
0.5 5ATV12p037M3 yes yes yes 10 5 GV2P08 5
1 5ATV12p075M3 yes yes yes 15 5 GV2P14 5 Ferraz HSJ (15) 5
1.5 2 5ATV12pU15M3 yes yes yes 15 5 GV2P16 5 Ferraz HSJ (25) 5
2.2 3 5ATV12pU22M3 yes yes yes 25 5 GV2P20 5 Ferraz HSJ (25) 5 33 5ATV12pU30M3 no no yes 30 5 GV2P21 5 Ferraz HSJ (40) 5 45 5ATV12pU40M3 no no yes 40 5 GV2P22 Ferraz HSJ (45) 5
1.5 2 5 ATV12
2.2 3 5 ATV12
33 5 ATV12 4 5 5 ATV12pU40M3 no no yes 40 10 GV3P32 50 50 65 3%
Reference
6
p037M3 p075M3 pU15M3 pU22M3 pU30M3 no no
With QO Circuit Breaker With GV2P/3P
QO QOB QOU A
yes yes yes
yes yes yes
yes yes yes
yes yes yes
yes yes yes
yes
Short Circuit Current Ratings
SCCR (kA)
10 10 GV2P07 50 3 65 3%
10 10 GV2P08 50 8 65 3%
15 10 GV2P14 50 15 65 3%
15 10 GV3P13 50 25 65 3%
25 10 GV3P18 50 30 65 3%
30 10 GV3P25 50 40 65 3%
GV2P/3P
7
Type E
X
SCCR
2, 3
(kA)
1
With Fuses
Fuses(A) 5
Z1, Z2
Fast Acting
Class CC
Ferraz ATDR (7)
Fast Acting
Class CC
Ferraz ATDR (7)
Fast Acting
Class CC
Ferraz ATDR (7)
SCCR
(kA)
Line
Reactor
1—
5—
5—
4
1.
Types of enclosures that can be used: 1, 12, 3, 3R, 4, and 4X-all non-ventilated.
2.
The GV2Ppp self-protected manual combination starter must be used with the GV2GH7 insulating barrier to meet the UL 508 Type E rating.
3.
The GV3Ppp self-protected manual combination st arter must be used with the GV3G66 insulating barrier and the GVAM11 auxiliary conta ct block
to meet the UL 508 Type E rating.
4.
The line reactor is required when the ATV12 drive is used in a system with a current availability higher than the drive's SCCR design
5.
When fuse type is not specified any Class J or CC can be used. If fuse manufacturer is not specified any fuse manufacturer can be used.
6
.
Input withstand rating is that for which the product has been designed thermally. Installation on a supply greater than this level will require additional inductance to satisfy this level
7.
Output interrupt rating relies on Integral solid state short circuit protection. This does not provide branch circuit protection. Branch circuit protection must be provided in accordance with the National Electrical Code and any additional local codes. This is dependant on the type of installation
Suitable for use on a circuit capable of delivering not more than___X___rms symmetrical kiloAmperes,___Y___Volts maximum, when protected by___Z1___with a maximum rating of___Z2___.
1/2 S1A58684 - 05/2013

Wiring

With Single-Phase Power Supply, when using GV2P and GV3P manual self-protected combination starters for single-phase input applications, wire the starter as illustrated :
ATV12 ATV12
M1: 200–240 V three-phase asynchronous motor
F1 M2
U1
1
2
R/L1
U/T1
M1
3
34
S/L2/N
V/T2
V1
56
Q1: GV P
W/T3
W1
2/2 S1A58684 - 05/2013
Loading...