Schneider ATSU 01N206LT, ATSU 01N209LT, ATSU 01N212LT, ATSU 01N222LT, ATSU 01N232LT Installation Instructions
Page 1
00162468814046
Altistart
ATSU01N2ppLT
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Only appropriately trained persons who are familiar with and understand the contents of this manual and all other
pertinent product documentation and who have received safety training to recognize and avoid hazards involved
are authorized to work on and with this soft starter system. Installation, adjustment, repair, and maintenance must
be performed by qualified personnel.
• The system integrator is responsible for compliance with all local and national electrical code requirements as well
as all other applicable regulations with respect to grounding of all equipm
• Many components of the product, including the printed circuit boards, operate with mains voltage. Do not touch.
Use only electrically insulated tools.
• Do not touch unshielded components or terminals with voltage present.
• AC voltage can couple voltage to unused conductors in the motor cable. Insulate both ends of unused conductors
of the motor cable.
• Before performing work on the soft starter system:
- Disconnect all power, including external control power that may be present.
- Place a "Do Not Turn On" label on a
- Lock all power switches in the open position.
• Install and close all covers before applying voltage.
Failure to follow these instructions will result in death or serious injury.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
No responsability is assumed by Schneider Electric for any consequences arising out of the use of this product.
© 2013 Schneider Electric. All Rights Reserved.
W9 1624688 01 14 A04
06 - 2013
ll power switches.
1/7
ent.
Page 2
a
b
35 mm
ATSU 01N206LT
ATSU 01N209LT
ATSU 01N212LT
ATSU 01N222LT
ATSU 01N232LT
a
b
mm
mm
in
45 234 150
1.8 9.2 5.9
45 314 170
1.8 12.4 6.7
mm
in
c
c
in
1624688 - 04
2/7
www.schneider-electric.com
Page 3
1)
2)
3)
1624688 - 04
1/L1, 3/L2, 5/L3
2/T1, 4/T2, 6/T3
R1A, R1C, COM, LI1, LI2,
+ 24 V, BOOST, LO1
3/7
AWG[ mm2 ]
y 8y 10
y 14y 2,5
Nm
lb/in
17...221,9...2,5
4,50,5
www.schneider-electric.com
Page 4
200…480 V a
50/60 Hz
TeSys U
- QF1
1/L1
3/L2
Control Unit
2/T1
4/T2
U1
1/L1
3/L2
–
A1
ATSU 01N2ppLT
2/T1
4/T2
U3
M
3
5/L3
6/T3
5/L3
6/T3
U1
BOOST
Power ON
B
+
A
B
+
A
B
+
A
Full Voltage
C D
C D
C D
Start Time
E
Initial Voltage
E
Stop Time
E
P
1
P
2
24 V
+
LUA1C20
–
S1
–
QF1
-
1624688 - 04
– A1
1718
ATSU 01N2ppLT
R1A
R1C
COM
LI1
LI2
+24 V
BOOST
LO1
4/7
LI2
LO1
10 s
U3
P2
P1
www.schneider-electric.com
Page 5
24 V
+
LUA1C20
–
S1
–
S2
–
QF1
–
1718
BOOST
S2
– A1
ATSU 01N2ppLT
R1A
–
QF1
U1
R1C
14 13
COM
LI1
LI2
+24 V
BOOST
LO1
Power ON
B
+
A
B
+
A
B
+
A
Full Voltage
C D
C D
C D
E
Start Time
E
Initial Voltage
Stop Time
E
P
1
P
2
P
3
1624688 - 04
P2
S1
LI2
LO1
U3
10 s
P1
u500 ms
5/7
www.schneider-electric.com
Page 6
+
LUA1C20
–
U1
BOOST
24 V
–
S2
–
QF1
– A1
ATSU 01N2ppLT
1718
R1A
R1C
COM
LI1
LI2
+24 V
BOOST
LO1
–
QF1
14 13
–
S1
1624688 - 04
P2
LI2
(S2)
LI1
(S1)
LO1
U3
10 s
P1
6/7
P3
www.schneider-electric.com
Page 7
Off /A l'arrêt /Paro /Bereit /Off
Main menu /Menu /Menu /Hauptmenu /Principale
ENT
1_Reference /Profil /Info /Profil /Profilo
x3
Main menu /Menu /Menu /Hauptmenu /Principale
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
ENT
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
41 Trip Class /41_Classe /41_Clase /41_Ausklasse /41_Classe
ENT
41 Trip Class /41_Classe /41_Clase /41_Ausklasse /41_Classe
ENT
10
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
41 Trip Class /41_Classe /41_Clase /41_Ausklasse /41_Classe
x5
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
46_Groundflt /46_def Terre /46_Def Tierra /46_Erd Fehl. /46_Diff Terra
ENT
46_Groundflt /46_def Terre /46_Def Tierra /46_Erd Fehl. /46_Diff Terra
Trip Level/Seuil Declenchement/Nivel Disparo/Auslösewert/Soglia sgan
46_Groundflt /46_def Terre /46_Def Tierra /46_Erd Fehl. /46_Diff Terra
ESC
Trip Level/Seuil Declenchement/Nivel Disparo/Auslösewert/Soglia sgan
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
46_Groundflt /46_def Terre /46_Def Tierra /46_Erd Fehl. /46_Diff Terra
LUCMppBL
x5
ENT
Trip Level /Seuil Declenchement /Nivel Disparo /Auslösewert /Soglia sgan
x2
4A
ENT
1624688 - 04
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
47_Phase Imb /47_Deseqlbre /47_Desfase /47_Ph Unsym /47_Disequil
ENT
47_Phase Imb /47_Deseqlbre /47_Desfase /47_Ph Unsym /47_Disequil
Trip Time Strt /Tps Lors Dem /Temp Disp arran /T Bis Auslö /T a Avviam
ESC
ESC
Main menu /Menu /Menu /Hauptmenu /Principale
4_AdvSetUp /Paramétrer /Ajustar /Parameter /Parametr.
47_Phase Imb /47_Deseqlbre /47_Desfase /47_Ph Unsym /47_Disequil
ESC
Trip Time Strt /Tps Lors Dem /Temp Disp arran /T Bis Auslö /T a Avviam
Trip Time Strt/Tps Lors Dem/Temp Disp arran/T Bis Auslö/T a Avviam
ENT
x10
15s
ENT
7/7
www.schneider-electric.com
Loading...