00162468613038
Altistart
ATS01N206FT
Power ON
Full Voltage
D
C
Start Time
E
B
+
A
D
C
Initial Voltage
E
B
+
A
C D
Stop Time
E
B
+
A
ATS 01N2ppLU/QN/RT
ATS01N222FT
B
+
A
C
B
+
A
C D
B
+
A
Power ON
Full Voltage
C D
Start Time
E
D
Initial Voltage
E
Stop Time
E
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Only appropriately trained persons who are familiar with and understand the contents of this manual and all other
pertinent product documentation and who have received safety training to recognize and avoid hazards involved
are authorized to work on and with this soft starter system. Installation, adjustment, repair, and maintenance must
be performed by qualified personnel.
• The system integrator is responsible for compliance with all local and national electrical code requirements as well
as all other applicable regulations with respect to grounding of all equipm
• Many components of the product, including the printed circuit boards, operate with mains voltage. Do not touch.
Use only electrically insulated tools.
• Do not touch unshielded components or terminals with voltage present.
• AC voltage can couple voltage to unused conductors in the motor cable. Insulate both ends of unused conductors
of the motor cable.
• Before performing work on the soft starter system:
- Disconnect all power, including external control power that may be present.
- Place a "Do Not Turn On" label on a
ll power switches.
- Lock all power switches in the open position.
• Install and close all covers before applying voltage.
Failure to follow these instructions will result in death or serious injury.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
No responsability is assumed by Schneider Electric for any consequences arising out of the use of this product.
© 2013 Schneider Electric. All Rights Reserved.
W9 1624686 01 13 A03
1/5
06 - 2013
ent.
c
a
e
d
1.38 in
35 mm
ATS 01N206pp
ATS 01N209pp
ATS 01N212pp
ATS 01N222pp
ATS 01N232pp
a
mm
in
45
1.78
45
1.78
mm
in
124
4.9
154
b
6
ATS01N206FT
B
+
B
+
B
+
mm
145
5.7
175
6.9
ATS01N206FT
Power ON
Full Voltage
C D
B
E
+
A
C D
B
E
+
A
C D
B
E
+
A
f
g
f
g
mm
in
in
132
5.2
162
6.4
Power ON
Full Voltage
C D
E
A
C D
E
A
C D
E
A
c
mm
in
131
5.1
131
5.1
mm
in
53
2.1
72
2.8
b
d
e
mm
in
30
1.2
30
1.2
1624686 - 03
2/5
2 x Ø M4
ATS01N206FT
Power ON
Full Voltage
D
C
Start Time
E
B
+
A
D
C
Initial Voltage
E
B
+
A
C D
Stop Time
E
B
+
A
www.schneider-electric.com
Loading...