schneider ALTIVAR 21 0.75 User Manual
Product
End-of-Life
Instructions
ALTIVAR 21 0.75 – 18.5 kW IP20
Product Range
ALTIVAR 21 0.75 – 18.5 kW IP20
Marketing Model
ATV21H075M3X and all models of Product Family: ALTIVAR 21 0.75 – 18.5 kW IP20
Size in mm (or m):
W x H x D : 107 x 143 x 150
Weight (excluding packaging) in kg (or g):
1266 g
Operations recommended
for the end of life treatment
There are several steps to process the products at the end of life so as to recover components, materials or energy:
Reuse
The components of the products that are recommended to be depolluted (according to the WEEE 2002/96/EC list)
or that are recommended to be re-used or dismantled so as to improve the material recovery or that lead to some
hazards are listed, identifi ed and located hereunder.
This ATV21 contains electrolytic capacitors which may cause electrical shock during the end of life treatment
process. BEFORE SERVICING, REMOVE ALL POWER and WAIT 15 MINUTES.
Charge LED lens clips Menbrane sheet(7Keys)/Keypad glued
Cover clips
4b
4b
Depollution Dismantling Shredding
7e
Cover locking Screw, ¼ turn clips
2d
1a
Filter PCBA screwed
HMI PCBA screwed
Insulation Sheet MMI screwed
HMI Board protection
sheet
HMI Board (CPU) screwed
HMI Board (TB) screwed
TB Cover (4b) clips
Wiring Trap (4b) clips
screwed
Hood (4b) -
1b
9a
9a
1b
1b
4b
4b
4b
Filter support screwed
4b
Drive PCBA screwed
1a
9a 1a
1a
2d
1a
9a
3c
7a
4b
Insulation sheet Module -
Power Module (1a) clips
Clips clips
Bus PCBA screwed
Insulation Sheet Bus -
Heatsink (3c) -
Fan clips
Fan Support clips
Grounding bar clips
3a
6a
Cables
connected
welded
Loading...