Product
End-of-Life
Instructions
ALTIVAR 12 0.18-0.37 kW / 100V / 1 PH
0.18-0.75 kW / 200V / 1PH or 3PH
Product Range
ALTIVAR 12 0.18-0.37 kW / 100V / 1 PH, 0.18-0.75 kW / 200V / 1PH or 3PH
Marketing Model
ATV12H075M2 and all models of Product Family:
ALTIVAR 12 0.18-0.37 kW / 100V / 1 PH, 0.18-0.75 kW / 200V / 1PH or 3PH
Size (mm):
W x H x D: 72 x 143 x 131
Weigth in kg (or g):
870 g
Operations recommended
for the end of life treatment
There are several steps to process the products at the end of life so as to recover components, materials or energy :
Reuse C Depollution C Dismantling C Shredding
The components of the products that are recommended to be depolluted (according to the WEEE 2002/96/EC list)
or that are recommended to be re-used or dismantled so as to improve the material recovery or that lead to some
hazards are listed, identifi ed and located hereunder.
This ATV12 contains electrolytic capacitors which may cause electrical shock during the end of life treatment
process. BEFORE SERVICING, REMOVE ALL POWER, WAIT 15 MINUTES.
Control Block PCBA
Electrolytic capacitors
Housing
1
2
3
Filter PCBA
Power Motor Control PCBA
Heatsink
Types of Components Number on drawing Components description
Components listed for operating hazards
Components listed for reuse None None
Components listed for depollution
Components listed for dismantling operation
which improves the recycling performance
1
1
4
2
1
2
3
4
Electrolytic capacitors
Printed Circuit Board Assembly (PCBA)
Electrolytic capacitors
Plastic parts > PC FR <
Aluminium (heatsink)
Schneider Electric Industries SAS
35, rue Joseph Monier
CS30323
F - 92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneider-electric.com
ENVEOLI100204EN
The version of the Guide used to create the document: End of Life Instruction Drafting Guide
of Schneider Electric version V1.
Publication : Schneider Electric
© 2009 - Schneider Electric - All rights reserved
26-03-2009