
4397HP Jamb Switch Box
INSTALLATION INSTRUCTIONS
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.
© SARGENT Manufacturing Company 2006 A7866A
1
STEP 1
Determine switch mounting location based on
mounting surface construction, applicable standards
and intended use.
Step 2.
Punch out the two mounting holes in the bottom of
the jamb switch box in the areas provided. Use caution
not to damage any electronics present in the box. For
hardwired applications, also punch out the wiring
access hole.
Step 3.
Drill holes for intended fastener in mounting surface
using the mounting box as your template. In hardwired
installations, drill a wiring access hole.
Step 4.
Insert the appropriate fastener through the box and
into the mounting surface and tighten securely.
Step 5.
In hardwired installations, wire the jamb switch to
the door controller using the NO and COMMON
contacts. For radio-controlled installations, wire the
jamb switch to the transmitter using the NO and
COMMON contacts.
Step 6.
Use the enclosed wrench to tighten the #6-32 screws
into the jamb box (as shown above-right).
Step 7.
Test for activation.
Observe all manufacturers recommendations for safety and
operation of their products. ANSI/BHMA standards that offer
specific recommendations for each type and class of automatic
door have been developed. To obtain a copy of the ANSI/BHMA
standard that applies to your installation, visit
www.buildershardware.com or www.ansi.org.
Jamb Switch
Deluxe Jamb Switch
Deluxe Jamb Switch
Jamb Switch Box

2
A7866A © SARGENT Manufacturing Company 2006
STEP 1.
Determine switch mounting height based on applicable standards and intended use.
Step 2.
Use the template provided to mark the clearance and mounting holes for the jamb switch. Cut out the opening and drill and tap for
#6-32 machine screws
Step 3.
Wire the jamb switch to the door control using the NO and COMMON contacts and test for activation.
Step 4.
Tighten screws through holes in cover plate with hex key provided
4397HP Jamb Switch
INSTALLATION INSTRUCTIONS
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.