SANYO MCD-PV50W User Manual

台灣三洋公司服務站一覽表

單 位 電 話 地 址

松江站 [phone] 台北市松江路 266 號 B1

三重站 [phone] 台北縣三重市自強路二段 30 號

永和站 [phone] 永和市福和路 303 號

板橋站 [phone] 板橋市永豐街 215 號

桃園站 [phone] 桃園縣中壢市內壢文化路 66 號

新竹站 [phone] 新竹市中正路 496 號

基隆站 [phone] 基隆市東明路 5 號

宜蘭站 [phone] 宜蘭市民權新路 1 之 5 號

花蓮站 [phone] 花蓮市美工六街 28 號

玉里站 [phone] 花蓮縣玉里鎮新興街 55 號

台東站 [phone] 台東市大同路 237 號

台中站 [phone] 台中市復興路一段 270 號

豐原站 [phone] 台中縣豐原市建成路 21 號

沙鹿站 [phone] 台中縣沙鹿鎮四平街 12 號

南投站 [phone] 南投市信義街 4 號

員林站 [phone] 彰化縣員林鎮日泰街 68 號

彰化站 [phone] 彰化市自強南路 89 號

嘉義站 [phone] 嘉義縣水上鄉三和村新和庄 120 號

虎尾站 [phone] 雲林縣虎尾鎮工專一街 7 號

台南站 [phone] 台南縣永康市中正南路 360 巷 19 號

MCD-PV50W

手提 CD 收錄音機

高雄站 [phone] 高雄縣大社鄉三民路 539 號

澎湖站 [phone] 澎湖縣馬公市西文里 97 之 40 號

鳳山站 [phone] 高雄縣鳳山市五甲一路 632 號

屏東站 [phone] 屏東市大連路 60 之 19 號

使用說明書

使用本產品前，務必詳讀本說明書，
以避免不當使用造成的故障或危險。

本產品限台灣區域使用

保

證 書

◎本公司之產品皆經過嚴密檢查與試驗，請安心使用。
◎承蒙選用本品不勝感激。自購買日期起一年內在正常使用下故障，本公司負責免費

維修。
◎雷射頭、錄放音磁頭等消耗性部品，售出後三個月內若新品不良，本公司免費服務。
◎本產品內部之任何零件，如非本公司技術人員修裝而使機器故障，本公司不負保證

責任。

※保證期間內，如有下列之情形時，亦酌收材料費※

1.未依使用說明書或本公司人員所示正確之使用方法使用，不論故意或過失等
因素而發生之故障。

2.改造或變更原來構造時，所發生之故障。

3.因火災或其他天災、地變等因素所致之故障。

4.其他人為因素所發生之故障。

5.經查驗非本公司銷售之機器，無法提示保證書及經銷商蓋章印者。

6.若遺失本保證書，恕不補發。

三洋 手提 CD 收錄音機 MCD-PV50W

保證期間 自購買日起一年

For use in Taiwan only

購買日期

姓名 女士/先生

客

地址

戶

電話

店名、地址

經

銷

商

製造號碼單貼附處：

電話：[phone]

MAINTENANCE

˙CLEANING OF HEADS AND TAPE PATH

We recommend cleaning after every 10 hours of operation. To make the best possible
recordings, you should clean all surfaces which the tape travels before every recording.

1. Press STOP/EJECT  button to open the cassette holder.

2. Wipe the heads, pinch ro ller and capstan with cleaning tip slight moisted with cleaning
fluid or alcohol.

3. After cleaning the heads and tape path, do not insert a cassette until the areas cleaned are
completely dry.

˙CLEANING THE CABINET

Clean the cabinet, panel and controls with a soft cloth light moisted with a mild detergent
solution. Do not use any type of adrasive pad, scouring powder or solvent such as alcohol or
benzine.

NOMINAL SPECIFICATIONS

Power Supply : AC 110V 60Hz，
DC 12V UM-1(D-SIZE) × 8
Power Output : 100 WATTS (P.M.P.O.)

Power Consumption : 20Watts
Speaker : 2W / 8Ω
Frequency Range : AM: 540 ～ 1600 kHz
FM: 88 ～ 108 MHz
Frequency Response : TAPE – 125 Hz - 6300 Hz
Frequency Response : CD – 61 Hz - 18000 Hz
S/N Ratio : 45 dB
Sampling Frequency : 44.1 kHz
Dimensions : 400 (W) × 250 (D) × 160 (H) mm
Weight : 3.3KGS

Weight and dimensions are approximate because we continually strive to improve our
products, specifications may change without prior notice.

11

TO LISTEN TO A RADIO STATION

1. Set FUNCTION SELECTOR to “RADIO” position.

2. Set BAND SELECTOR to the desired band.

3. Tune to the desired station by turning the TUNING CONTROL.

4. Adjust VOLUME CONTROL to suit your personal listening preference.

5. To switch the radio off, set the FUNCTION SELECTOR to “TAPE (CD RADIO OFF)”.

TO PLAY A CASSETTE

For operating the cassette deck, follow the steps:

1. Set FUNCTION SELECTOR to “TAPE (POWER OFF)” position.

2. Insert a recorded cassette tape with the tape surface down.

3. Press PLAY  button on cassette deck to begin playback.

4. To stop the tape, press STOP/EJECT  button on cassette deck.
˙Before inserting a cassette, take up any slack in the tape to prevent it from becoming

tangled around the capstan.

TO RECORD TO A CASSETTE TAPE

Your equipment is able to record your desired sound source either through built in
microphone or RADIO program or the CD.

1. Insert blank cassette in cassette deck.

2. Depress PAUSE  button on cassette deck.

3. Depress RECORD & PLAY  button on cassette deck.

4. Select your desired program by setting FUNCTION SELECTOR and play the program.

5. To start recording, press PAUSE  button on cassette deck again.

6. To stop recording, press STOP/EJECT  button cassette deck.
WARNING: Copyright may exist in material you wish to record.

Copying of such material requires the permission of the owner of owners.

˙The recording level is automatically adjusted by built-in ALC circuit.
˙The recording level is not affected by the VOLUME CONTROL, so you can listen to the

program with any volume.

TAPE RECORDING - From External Microphone (NOT SUPPLIED)

1. Select the Function Selector to TAPE .

2. Insert microphone into the MIC MIXING JACK, which accepts any dynamic microphone
with impedance between 600 and 3000 ohms and 6.3mm diameter standard plug.
NOTED: Always disconnect the microphone when the microphone is not in use.

3. Insert a blank tape with exposed TAPE downwards and full spool to the left.

4. To record, depress the RECORD and PLAY  button.

5. To stop recording, press the STOP/EJECT  button.

10

FUNCTION DISPLAY

The function display shows you various playing modes, track numbers.

No disc is inserted in the CD compartment.

The unit is in the stop mode.

During playing a disc.

While player is set to pause

During programming

Track number will be stored

While CD door is opened

NOTES ON HANDLING COMPACT DISCS

˙To keep the disc clean, handle the disc by its edge. Do not touch the surface.
˙Do not stick paper or tape nor write anything on the surface.
˙After playing, store the disc in its case.

9