Sanyo DSR-5716P, DSR-5709P Quick Start Guide

Digital Video Recorder

DSR-5716P DSR-5709P

Quick Guide

See “INSTRUCTION MANUAL” for menu settings or details of the operation.

Contents

1 NAMES AND FUNCTIONS OF PARTS .......... 1

Front panel....................................................... 1

INTRODUCTION

1 PREPARING FOR USE................................... 3

Operation display ............................................. 3

Changing the display position of the operation

display area...................................................... 4

Changing the language.................................... 4

Setting the time ................................................ 5

2 MONITORING VIDEO FROM A CAMERA ..... 7

Viewing on a full screen ................................... 7

Viewing on quad screens ................................. 8

Viewing on multi 9 or multi 16 screens ............ 9

Enlarging video ................................................ 9

3 RECORDING ................................................. 10

Normal recording ........................................... 10

Timer recording.............................................. 10

Alarm recording.............................................. 11

Normal recording easy setup ......................... 11

4 PLAY ............................................................. 12

OPERATION

Playing video on a full screen ........................ 12

Fast-forward and fast-rewind playback .......... 12

Viewing still images........................................ 13

Frame advance (forward/reverse).................. 13

5 SEARCHING FOR RECORDED VIDEO ....... 14

Alarm log search ............................................ 14

Alarm search.................................................. 15

Alarm thumbnail search ................................. 18

Time/date search ........................................... 20

6 SAVING (COPYING) RECORDED VIDEO ... 22

Copying to a USB memory ............................ 22

Copying to a CD-R/RW or DVD+R/+RW ....... 24

Folder structure of copied video..................... 28

1 NAMES AND FUNCTIONS OF PARTS

DSR-5716P

1 2 3 4 5

POWER FULL ERROR LOCK ALARM

91011

USB

12 13

678123

14 15 16

9 8

QUAD

PRESET

SEQUENCE

FUNC.

MULTI

AUTO PAN

PLUSMON 2

TOUR

13 14 15

1716 18

EXIT/OSD

ENTER AF

ZOOM

SEQUENCE MARK/COPY

REC/STOP

SHUTTLE HOLD

TIMER

PLAY/STOP

STILL

IRIS

FOCUS

ALARM

ZOOM/I/FO

SHUTTLE

JOG

MENU RESET

PAN

Front panel

1. POWER indicator

Lights up when the power is on.

2. FULL indicator

Flashes when the amount of available memory in the hard disk’s recording area drops to the percentage specified using menu settings. In addition, recording stops automatically when no more memory is available, and the FULL indicator switches to a permanently lit condition. The indicator can then be turned off by performing “AREA FULL RESET”.

3. ERROR indicator

This indicator flashes if the HDD or fan begins to malfunction.

4. LOCK indicator

Lights up when operations have been locked. The LOCK indicator turns off when the lock condition is cancelled.

5. ALARM indicator

Flashes during alarm recording. The ALARM indicator lights up during pre-alarm recording.

6. USB terminal

Connects to a recordable CD/DVD drive or a USB memory. For compatibility, refer to the SANYO homepage. http://www.sanyosecurity.com/ When the USB port on the rear panel is also connected at the same time, only the front port will be used preferentially.

7. [CAMERA SELECT] buttons and indicators

When one or more cameras have been connected to the VIDEO IN terminals on the digital video recorder’s rear panel and the appropriate [CAMERA SELECT] button is pressed, the corresponding indicator lights up and the video feed from that camera is displayed on-screen. z During quad, multi 9, or multi 16 screen display:

The indicators corresponding to the cameras being displayed on the monitor light up.

z During video loss:

The indicator starts to flash.

z If an alarm occurs:

The indicator for the corresponding camera starts to flash.

11 12

23 24 21

8. [FUNC.] button

Activates dome camera operation mode. The operation of other buttons changes. Use also for advanced menu functions.

9. [QUAD] button and indicator

Displays video in quad screens. The indicator lights up while in quad screen display. The indicator turns off when using a different screen display mode.

10. [MULTI] button and indicator

Displays video in multi 9 or multi 16 screen display. The indicator lights up while in multi 9 or multi 16 screen display. The indicator turns off when using a different screen display mode. The DSR-5709P can only display video in nine screens.

11. [MON2] button and indicator

If the [MON2] button is pressed while a monitor is connected to the MON2 output terminal on the rear panel, it is possible to change the monitor 2 video. The [CAMERA SELECT], [SEQUENCE] and [QUAD] buttons can be used. The indicator lights up when this mode is selected.

12. [PLUS] button

Changes the video from a single camera to quad screen size during multi 9, multi 16, full screen or quad screen display. For DSR-5709P, this operation is available when in multi 9, quad and full screen display.

13. [MENU] button and indicator

Displays the menu screens (i.e., setting screens), and the indicator lights up while any of these screens is being displayed.

English 1

NAMES AND FUNCTIONS OF PARTS1

DSR-5709P

1 2 3 4 5

POWER FULL ERROR LOCK ALARM

USB

14. [EXIT/OSD] button and indicator

z EXIT: Exits the main menu or a sub-menu. When a menu is displayed, the indicator turns off. (The EXIT operation is disabled while the WARNING screen is displayed or a setting for menu item is being selected (with light flashing) on the menu screen.) z OSD: Each time the [OSD] button is pressed while the digital video recorder is recording, playing, or stopped, the operation display area changes position between the top and bottom of the screen or becomes hidden; furthermore, the indicator lights up whenever this information is being displayed.

15. [PLAY/STOP] button and indicator

When the [PLAY/STOP] button is pressed, the video from the recording area is played and the indicator lights. When pressed during playback, this button stops the digital video recorder.

16. [ZOOM] button and indicator

When the [ZOOM] button is pressed during playback or monitoring of camera video on a full screen, a portion of the playback video is magnified and the indicator lights.

17. [SEARCH] button and indicator

When the [SEARCH] button is pressed while the digital video recorder is recording or stopped, the search menu is displayed and the indicator lights up. Press this button again to close the search menu.

18. [STILL] button and indicator

When the [STILL] button is pressed during playback, the current frame is displayed as a still image and the indicator lights up. Press this button again to cancel.

19. [SEQUENCE] button and indicator

Automatically switches the camera video during monitoring. When this button is pressed, the indicator begins flashing and the display is changed automatically. The [CAMERA SELECT] button indicator lights in accordance with screen changes.

20. [MARK/COPY] button and indicator

z MARK You can bookmark any video images during recording or playback. z COPY Copies recorded video onto the hard disk archive area, USB memory, CD-R/RW disk, DVD+R/+RW disk or other media. The indicator lights up during the copy process.

6789123

9 8

QUAD

PRESET

SEQUENCE

11 12

FUNC.

MULTI

AUTO PAN

PLUSMON 2

TOUR

13 14 15

ZOOM

SEQUENCE MARK/COPY

REC/STOP

1716 18

EXIT/OSD

PLAY/STOP

ENTER AF

STILL

IRIS

SHUTTLE HOLD

FOCUS

TIMER

ALARM

ZOOM/I/FO

23 24 21

SHUTTLE

JOG

MENU RESET

PAN

21. [SHUTTLE HOLD] button and indicator

Locks shuttle dial operation for a constant speed during playback or slow playback. The indicator lights up while the shuttle dial is locked.

22. [REC/STOP] button and indicator

Starts normal recording, and the indicator lights up during this process. Press this button for at least three seconds to stop recording and turn off the indicator.

23. [TIMER] button and indicator

If the [TIMER] button is pressed while the recording is stopped, timer recording standby mode is selected and recording starts automatically at the set time. The indicator lights up while in timer recording standby mode. If the button is pressed during timer recording, this process is stopped and the indicator turns off. Furthermore, if the [TIMER] button is pressed when in timer recording standby mode, timer recording is cancelled.

24. [ALARM] button

When an [ALARM] button is pressed during playback or still, the digital video recorder skips to the next earlier or next later alarm.

25. Jog dial (inside) and shuttle dial (outside)

z During playback:

Use the jog dial to change the playback speed. Use the shuttle dial to perform fast-forward or fast-reverse playback.

z During menu display:

Use the jog dial to move the cursor and to change setting values. Use the shuttle dial to confirm settings.

26. [MENU RESET] button

Restores displayed menus to default menu settings.

INTRODUCTION SETTINGS NETWORK

CONTROL

NETWORK

OPERATION

NETWORK

SETTINGS

OTHEROPERATION

2 English

1 PREPARING FOR USE

[MENU] button

[EXIT/OSD] button

Shuttle dial

Jog dial

Operation display

When the power is turned on, the operation display is shown at the top of the monitor screen. This area indicates the date, time, picture quality and other information needed for operation.

Operation display area

(1) (2) (3) (4) (5)(6) (7)

01-01-07 00:00:00 REC REPEAT EN A ALARM 0000000

(8)

* The above is an example display. This is not the default.

(1) Date display (JP.5)

Be sure to specify the correct date using menu settings.

(2) Time display (JP.5)

Make sure to specify the time using menu settings. Recording is not possible until the time is set.

(3) Operation symbol display

Displays the current operation, such as recording or playback.

REC: Recording : Fast-forward playback EXT: External timer recording : Fast-rewind playback

: Normal playback : Slow playback : Reverse playback : Reverse slow playback : Still

z During simultaneous recording and playback, the display

indicates playback ( ).

(4) Remaining memory in recording area

It is displayed while recording. Displays the remaining area memory as a percentage when overwriting in the recording area is not permitted. If overwriting is permitted, “REPEAT” is displayed.

(5) Picture quality display

Displays the quality of the video that can be recorded on the hard disk. Set to “EN” (Enhanced) by default setting.

[Settings] ( indicates default setting)

BA Basic

NO Normal

EN Enhanced

FI Fine

SF Super Fine

(6) Audio recording display

“A” is displayed when audio is being recorded. “A” is displayed when audio is being played back if audio is recorded.

(7) Alarm display and alarm count display

When an alarm is set using the “ALARM REC MODE SET” menu item, the following information is displayed. z When alarm recording is set;

“ALARM” and the alarm number are displayed in stand-by mode. “ALARM” flashes during alarm recording.

z When pre-alarm recording is in progress;

“PRE” and the alarm number are displayed in stand-by mode. When an alarm occurs, “PRE” disappears and “ALARM” and the alarm number are displayed.

z When performing playback from the archive area;

“ARCHIV” and the backup number are displayed.

z The digital video recorder uses the date and time to

manage recording and playback points. Accordingly, if the time has not been set correctly, it is not possible to effectively search for video data.

English 3

PREPARING FOR USE1

(8) Camera title display

The camera number or camera title is displayed. Also, when an alarm occurs the camera number and alarm “EA”, “SA”, or “ES” are displayed. z When an external alarm signal is activated;

“EA” flashes to the left of the camera number.

z When a motion sensor alarm signal is activated;

“SA” flashes to the left of the camera number.

z When an external alarm signal and motion sensor signal

are activated; “ES” flashes to the left of the camera number.

z Although operations such as playback, copying and data

transfer are possible while recording, this unit gives priority to recording, and other operations may be delayed as a result.

Changing the display position of the operation display area

1 Press the [EXIT/OSD] button.

EXIT/OSD

Each time the [EXIT/OSD] button is pressed, the operation display moves to a different location or is hidden.

Top (default setting)

Bottom

Hidden

Operation

Operation display area

display area

01-01-07 00:00:00 EN A1

01 02

01-01-07 00:00:00 EN A1

03 04

Changing the language

The language displayed on the monitor can be changed. [Settings] ( indicates default setting)

Item Setting Description

ENGLISH Sets the language to English.

LANGUAGE

FRANCAIS Sets the language to French. DEUTSCH Sets the language to German. ESPAÑOL Sets the language to Spanish.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

1.INITIAL SET ->

2.RECORD SET ->

3.GENERAL SET ->

4.SCREEN SET ->

5.POWER LOSS/USED TIME ->

6.INITIALIZATION LOG ->

7.COPY MENU SETTINGS ->

8.ADVANCED MENU SET ->

MOVE:JOG SELECT:SHUTTLE

2 Turn the jog dial to select “1.INITIAL

SET” and then turn the shuttle dial clockwise.

The <INITIAL SET> screen is displayed.

1.LANGUAGE/CLOCK SET ->

2.CAMERA DETECT ->

3.TITLE SET ->

4.HOLIDAY SET ->

5.TIME PERIOD SET ->

OPERATIONINTRODUCTION SETTINGS NETWORK

CONTROL

NETWORK

OPERATION

MOVE:JOG SELECT:SHUTTLE

3 Turn the jog dial to select

“1.LANGUAGE/CLOCK SET” and then turn the shuttle dial clockwise.

The <LANGUAGE/LANGUE/SPRACHE/IDIOMA> screen is displayed.

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH <CLOCK SET> 01-01-2007 MON 00:00:00 <SUMMER TIME SET> MODE : USE WEEK MONTH TIME ON LST-SUN 03 02:00 OFF LST-SUN 10 02:00 <EXT.CLOCK SET> ADJUST. TIME 01:00

NETWORK

SETTINGS

OTHER

4 English

PREPARING FOR USE1

4 Turn the shuttle dial clockwise.

“ENGLISH” flashes.

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH <CLOCK SET> 01-01-2007 MON 00:00:00 <SUMMER TIME SET> MODE : USE WEEK MONTH TIME ON LST-SUN 03 02:00 OFF LST-SUN 10 02:00 <EXT.CLOCK SET> ADJUST. TIME 01:00

5 Turn the jog dial to select the language

and then turn the shuttle dial clockwise.

The language is selected and the cursor moves to the next item.

<REGL.LANGUE> FRANCAIS <REGL.HORLOGE> 01-01-2007 LUN 00:00:00 <HEURE D'ETE> MODE : MARCHE SEMAINE MOIS HEURE ON DER-DIM 03 02:00 OFF DER-DIM 10 02:00 <REGL.HORLOGE EXTERNE> REGL.DE L'HEURE 01:00

Setting the time

(Default setting: 01-01-2007 MON 00:00:00) Be sure to set the correct date and time as these settings are used during playback and searching.

Example: Setting 8:30 on 26 January, 2007.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

1.INITIAL SET ->

2.RECORD SET ->

3.GENERAL SET ->

4.SCREEN SET ->

5.POWER LOSS/USED TIME ->

6.INITIALIZATION LOG ->

7.COPY MENU SETTINGS ->

8.ADVANCED MENU SET ->

MOVE:JOG SELECT:SHUTTLE

2 Turn the jog dial to select “1.INITIAL

SET” and then turn the shuttle dial clockwise.

The <INITIAL SET> screen is displayed.

6 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

1.LANGUAGE/CLOCK SET ->

2.CAMERA DETECT ->

3.TITLE SET ->

4.HOLIDAY SET ->

5.TIME PERIOD SET ->

MOVE:JOG SELECT:SHUTTLE

3 Turn the jog dial to select

“1.LANGUAGE/CLOCK SET” and then turn the shuttle dial clockwise.

The <LANGUAGE/LANGUE/SPRACHE/IDIOMA> screen is displayed.

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH <CLOCK SET> 01-01-2007 MON 00:00:00 <SUMMER TIME SET> MODE : USE WEEK MONTH TIME ON LST-SUN 03 02:00 OFF LST-SUN 10 02:00 <EXT.CLOCK SET> ADJUST. TIME 01:00

English 5

PREPARING FOR USE1

4 Turn the jog dial to select “01” and then

turn the shuttle dial clockwise.

“01” flashes (indicating the day).

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> [KEY] ENGLISH <CLOCK SET> 01-01-2007 MON 00:00:00 <SUMMER TIME SET> MODE : USE WEEK MONTH TIME ON LST-SUN 03 02:00 OFF LST-SUN 10 02:00 <EXT.CLOCK SET> ADJUST. TIME 01:00

5 Turn the jog dial to select “26” and then

turn the shuttle dial clockwise.

The day is set to “26” and the month “01” flashes.

26-01-2007 FRI 00:00:00

OPERATIONINTRODUCTION SETTINGS NETWORK

6 Use the same procedure to set the

month (01), year (2007), hour (08) and minute (30).

When the minutes are set, the cursor moves to the next item.

26-01-2007 FRI 08:30:00

z The day of the week is set automatically. z The clock stops during date and time settings. z The clock starts counting from 00 seconds.

7 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

CONTROL

NETWORK

OPERATION

NETWORK

SETTINGS

6 English

OTHER

2 MONITORING VIDEO FROM A CAMERA

[MULTI] button

[CAMERA SELECT] button

Viewing on a full screen

Example: Selecting Camera 2

1 Press the No. 2 [CAMERA SELECT]

button.

The CAMERA SELECT indicator lights up and video from Camera 2 is displayed on a full screen.

[QUAD] button

[ZOOM] button

Shuttle dial

[PLUS] button

Jog dial

2 Move the zoom frame to the area to be

magnified.

z Turn the jog dial to move the zoom frame to the left or right.

z Turn the shuttle dial clockwise and then turn the jog dial to

move the zoom frame vertically.

Viewing enlarged live images

1 Press the [ZOOM] button during

monitoring of camera video.

Press the button corresponding to the camera for which video is being magnified. The ZOOM indicator lights up and a blue zoom frame appears in the center of the screen.

ZOOM

Move the zoom frame to the area to be magnified.

3 Turn the shuttle dial clockwise.

The area enclosed by the zoom frame is magnified (by a factor of 2).

English 7

MONITORING VIDEO FROM A CAMERA2

4 Press the [ZOOM] button to return to

normal magnification.

Magnification is cancelled and the display returns to the normal screen. The ZOOM indicator turns off.

ZOOM

z Magnified video has a slightly coarser appearance when

compared with normal video.

z Images cannot be enlarged in multi-screen format.

Viewing on quad screens

Images from multiple connected cameras can be displayed simultaneously.

1 Press the [QUAD] button.

The QUAD indicator lights up and video from four separate cameras is displayed simultaneously. Video from Camera No. 1 through Camera No. 4 is initially displayed.

QUAD

0201

0403

2 To view video from other cameras,

press the [QUAD] button again.

Each time this button is pressed, the four images on the quad screen change, in order of cameras No. 1-4, 5-8, 9-12 and 1316 (default setting). On the DSR-5709P, the images change in order of cameras No. 1-4, 5-8, 9-3, etc.

OPERATIONINTRODUCTION SETTINGS NETWORK

CONTROL

QUAD

0605

0807

3 To return to full screen display, press a

[CAMERA SELECT] button.

On the DSR-5709P, press the [CAMERA SELECT] 1-9 button.

NETWORK

OPERATION

NETWORK

SETTINGS

OTHER

8 English

+ 21 hidden pages