Sanyo DSM10 Specifications

Ordering number : ENN2794A

DSM10

Diffused Junction Silicon Diode

DSM10

1.0A Power Rectifier

Features

Package Dimensions

•Facilitates automatic mounting and miniaturization in end products.

•Peak reverse voltage : VRM=200, 600V.

•Average rectified current : IO=1.0A.

unit : mm

1188

[DSM10]

	Cathode mark		0.1
		1.5	2.5
	5.0
		0.9	2.0
1.2	1.2	0.2

Specifications

Absolute Maximum Ratings at Ta=25°C

Parameter	Symbol	Conditions		DSM10C			DSM10G		Unit
Peak Reverse Voltage	VRM			200			600		V
Average Recitified Current	IO	50Hz sine wave, mounted on an					1.0		A
		alumina board
		Load resistor, mounted on a PCB					0.75		A
Surge Forward Current	IFSM	50Hz sine wave,					25		A
		non-repetitive, 1 cycle peak value
Junction Temperature	Tj						150		°C
Storage Temperature	Tstg						--55 to +150		°C
Electrical Characteristics at Ta=25°C
Parameter	Symbol	Conditions			Ritings				Unit
				min		typ		max
Forward Voltage	VF	IF=1A						1.1	V
Reverse Current	IR	VR=VRM						10	μA
Thermal Resistance	θj-l	Junction-Lead						23	°C/W
	θj-a	Junction-Ambient Mounted on an alumina board						108	°C/W
		Mounted on a PCB						157	°C/W

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

41000 GI IM / 62098 HA (KT) 5109 TA, TS No.2794-1/2

DSM10

	10			IF -- VF
	7
	5								A
--A									--
	3								FSM
F	2								I
I									FowardSurgeCurrent,
ForwardCurrent,	2					C
	1.0					°
	7					Ta=150	C
							°
	5						25
	3
	0.1
	0	0.2	0.4	0.6	0.8	1.0	1.2	1.4	1.6
			Forward Voltage, VF -- V					ID01204
	1.4			IO	--	Ta
A	1.2
--
O	1.0
I
Current,				Resistive, inductive load
Rectified	0.8				Capacitive load
	0.6					Mounted on an
						almina board
						Mounted on a PCB
Average	0.4
	0.2
	0
	0	20	40	60	80	100	120	140	160

Ambient Temperature, Ta -- °C

ID01206

35

30

25

20

15

10

5

0

1.0

IFSM -- n

50Hz

2	3	5	7	10	2	3	5	7	100
	Number of Cycles at 50Hz, n							ID01205

Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd.

Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

This catalog provides information as of April, 2000. Specifications and information herein are subject to

change without notice.

PS No.2794-2/2