|
Sonos® One™ |
Sonos® PLAY:1™ |
Sonos® PLAY:3™ |
Sonos® PLAY:3™ |
|
WSS21 / WSS22
SPEAKER STAND
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help!
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this product is perfect for you!
This stand is designed to support only Sonos® One™, PLAY:1™ and PLAY:3™ speakers.
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
•Do not use this product for any purpose not explicitly specified by manufacturer.
•Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
•If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520.
Speaker Weight Limit |
5.8 lbs. |
|
DO NOT EXCEED |
||
(2.6 kg) |
||
|
|
Tool Needed
Screwdriver
2
Dimensions
3434 in.
(866 mm)
1313in.
(322322mm)
1010in.
(254254mm)
Front View |
Top View |
3
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
Quantities shown are for one speaker stand.
STEP 1
Base
02 |
x1 |
|
1/4-20 x 3/4 in.
Base Screw
03 x1
Tube
Lock Washer
01 x1
04 x1
STEP 2
Top Collar
05 x1
Bottom Collar
06 x1
STEP 4
Rubber Pads
07 x4
OPTIONAL
M6 x 20 mm |
M6 |
Carpet Spikes |
Spike Nuts |
08 x4 |
09 x4 |
4
STEP 5
Sonos® One™/ PLAY:1™
Bracket
10 x1
Sonos® PLAY:3™
Horizontal Bracket
11 x1
Sonos® PLAY:3™
Vertical Bracket
12 x1
STEP 6
1/4-20 x 5/8 in.
Bracket Screw
13 x1
1/4-20 x 3/8 in.
Speaker Screw
15 x1
2.7 in. Felt Pad
14 x1
5
STEP 1 Attach Base to Tube
04
01
02
03
1/4-20 x 3/4 in
6