Samsung VP-DX10, SC-DX10 User Manual

(FirmwareUpdateProcedure)

1. Please copy the firmware files to SD/MMC Card.

2. Please turn on the unit.

3. Please change the mode from "Storage" to "Card"

4. Please turn off the unit.

5. Please turn on the unit.

6. Please insert the SD/MMC card into the unit.

7. The message will appear as below.

8. Please select YES.

9. The unit will be turned off automatically after the update is finished.
If the unit will be not turned off automatically, please turn off the unit
after 10 minutes.

※ You have to update your unit twice.(DSP update and ARM update)

-SC-DX10 (NTSC model) : DSP Firmware + ARM Firmwre(macarthur_NN_20080328.upd)

-VP-DX10 (PAL model) : DSP Firmware + ARM Firmwre(macarthur_NP_20080328.upd)

※ The unit will be updated DSP update first.

After DSP update, the unit will be updated ARM update.