samsung VP-D70, VP-D70i, SCD67, SCD70 Service Manual

DIGITAL VIDEO CAMERA

VP-D70/D70i SCD67/70

SERVICE

Manual

Printed in Korea

AD68-00420C

DIGITAL VIDEO CAMERA

CONTENTS

1. Specifications

2. Disassembly and Reassembly

3. Alignment and Adjustment

4. Exploded View and Parts List

5. Electrical Parts List

6. Wiring Diagram

7. PCB Diagrams

8. Schematic Diagrams

1. Product Specifications and Comparison Chart

1-1 Product Specifications (SCD67 / SCD70)

Design and specifications are subject to change without notice.

Operation

SYSTEM Video signal NTSC standards Video recording system 2rotary heads,helical scanning system Audio recording system Rotary heads, PCM system Usable cassette Digital video tape (6.35mm width): MiniDV cassette Tape speed SP : approx. 18.81 mm/s LP : approx. 12.56mm/s Tape Recording time SP : 60 minutes (when using DVM 60)

LP : 90 minutes (when using DVM 60) FF/REW time Approx. 150 sec. (using DVM60 tape) Image device CCD (Charge Coupled Device)

Lens F1.6 22x(Optical),500x(Digital)Electronic zoom lens, Filter diameter ø37 LCD monitor/Viewfinder Size/dot number 2.5inch/112.320

LCD monitor Method TFT LCD Viewfinder 0.24”B/W LCD CONNECTORS Video output 1Vp-p (75Ω terminated) S-Video output Y: 1vp-p,75Ω ,C: 0.286Vp-p, 75Ω Audio output -7.5dBs (600Ω teminated) DV input/output 4pin special in/out connector External mic ø3.5 stereo GENERAL Power source DC 8.4V, Lithium lon Battery Pack 7.4V Power source type Lithium lon Battery Pack,

Power supply (100V~240V)50/60Hz Power consumption (Recording) SCD67/SCD70:6.3W(LCD),5.0W(EVF) Operating temperature 0°C ~ 40°C (32°F ~104°F) -20°C to 60°C (-4°F to 140°F) Storag temperature -20°C ~ 60°C (-4°F ~140°F)

External dimension Length 158 mm,Height93 mm,Width 87mm Weight 580g (Except for Lithium lon Battery Pack and tape) Built-in MIC Omni-direcional stereo condenser microphone

Remote control Indoors: greater than 15m (straight line)

Outdoors:greater than 5m (straight line)

Description

Samsung Electronics 1-1

Product Specifications

1-2 Product Specifications (VP-D70/D70i)

Design and specifications are subject to change without notice.

Operation

SYSTEM Video signal PAL, CCIR standards Video recording system 2rotary heads,helical scanning system Audio recording system Rotary heads, PCM system Usable cassette Digital video tape (6.35mm width): MiniDV cassette Tape speed SP : approx. 18.83 mm/s LP : approx. 12.57mm/s Tape Recording time SP : 60 minutes (when using DVM 60)

LP : 90 minutes (when using DVM 60) FF/REW time Approx. 150 sec. (using DVM60 tape) Image device CCD (Charge Coupled Device)

Lens F1.6 22x(Optical),500x(Digital)Electronic zoom lens, Filter diameter ø37 LCD monitor/Viewfinder Size/dot number 2.5inch/112.320

LCD monitor Method TFT LCD Viewfinder 0.24”B/W LCD CONNECTORS Video output 1Vp-p (75Ω terminated) S-Video output Y: 1vp-p,75Ω ,C: 0.286Vp-p, 75Ω Audio output -7.5dBs (600Ω teminated) DV input/output Out only External mic ø3.5 stereo GENERAL Power source DC 8.4V, Lithium lon Battery Pack 7.4V Power source type Lithium lon Battery Pack,

Power supply (100V~240V)50/60Hz Power consumption (Rec.) VP-D7O/D70i:6.3W (LCD), 5.0W (EVF) Operating temperature 0°C ~ 40°C (32°F ~104°F) -20°C to 60°C (-4°F to 140°F) Storag temperature -20°C ~ 60°C (-4°F ~140°F) External dimension Length 158 mm,Height93 mm,Width 87mm

Weight 580g (Except for Lithium lon Battery Pack and tape) Built-in MIC Omni-direcional stereo condenser microphone Remote control Indoors: greater than 15m (straight line)

Outdoors:greater than 5m (straight line)

Description

1-2

Samsung Electronics

1-3 Comparison Chart

Product Specifications

MODEL

FUNCTION

VIEWFINDER EVF EVF EVF EVF

D.ZOOM X500 X500 X500 X500

REMOTE CONTROL 0 X 0 0 DIS 0 0 0 0 CCD 460K 390K 390K 460K iEEE1394 OUT IN/OUT IN/OUT IN/OUT

VP-D70 SCD67 SCD70 VP-D70i

Samsung Electronics 1-3

Product Specifications

MEMO

1-4

Samsung Electronics

2. Disassembly and Reassembly

2-1 Cabinet and PCB

2-1-1 Top Cover removal

(1) Remove 2 screws

Samsung Electronics

Fig. 2-1 Top Cover removal

2-1

Disassembly and Reassembly

2-1-2 Ass’y Cover Housing removal

(3) Remove cover housing

in the direction of arrow

(1) Remove 2 screws

(2) Remove 2 screws

2-2

Fig. 2-2 Ass’y Cover Housing removal

Samsung Electronics

2-1-3 Ass’y Front removal

(1) Remove 1 screw

Disassembly and Reassembly

(3) Remove ass’y front in the direction of arrow

(2) Remove 1 screw

Fig. 2-3 Ass’y Front removal

Samsung Electronics

2-3

Disassembly and Reassembly

2-1-4 Ass’y Case-Left removal

(1) Remove 2 screws

(2) Remove 2 screws

(5) Remove ass’y case left

in the direction of arrow

(3) Remove 2 screws

(4) Remove 2 screws

Fig. 2-4 Ass’y Case-Left removal

2-4 Samsung Electronics

2-1-5 Ass’y Case-Right removal

(4) Remove ass’y case right

in the direction of arrow

Disassembly and Reassembly

(1) Remove 2 screws

(2) Remove 2 screws

(3) Remove 1 screw

Fig. 2-5 Ass’y Case-Right removal

Samsung Electronics 2-5

2-1-6 Ass’y Camera & Main PCB removal

(2) Remove ass’y camera & main

pcb in the direction of arrow

Disassembly and Reassembly

(1) Remove 3 screws

Fig. 2-6 Ass’y Camera & Main PCB removal

2-6

Samsung Electronics

Disassembly and Reassembly

2-1-7 Ass’y-Camera removal

(3) Remove ass’y camera

in the direction of arrow

(2) Remove 1 screw

(1) Desolder

Fig. 2-7 Ass’y Camera removal

Samsung Electronics

2-7

Disassembly and Reassembly

2-2 Circuit Boards Location

2-8

Fig. 2-8 Circuit Boards Location

Samsung Electronics

2-3 Connector Diagram

Disassembly and Reassembly

Samsung Electronics

Fig. 2-9 Connector Diagram

2-9

3. Alignment and Adjustment

3-1. VCR Adjustment

3-1-1. VCR Adjustment Preparation

1. How to get into the VCR adjust mode.

STEP 1

1. Connect the power source.

2. Set the mode switch of the video camera to "PLAYER" position.

3. Insert standard tape into the video camera and set to "PLAY" position.

4.Press the "PLAY" button on the video camera or

the remote control

SP PLAY

0:00:00:01

NO MODE EVR EPR

1 V-REF 79H 79H

S64 LOO

01 01380

STEP 2

1. Press and hold the "F.ADV" button on the remote control and "ENTER" button on the video camera at the same time for more than 10 seconds.

2. When monitor OSD appears as shown below, VCR adjustment mode has been activated successfully.

3. When changing the adjustment item after the adjusted value is designated, press the "START/STOP" button.

Indicates preset values

Indicates the adjusted values Indicates current adjustment item.

Samsung Electronics 3-1

Adjustment and Adjustment

Fig.1. RIGHT CASE

Fig.2. REMOCON KEY

STEP 3 . If you want to finish the adjustment mode, you have to do Power Reset.

The Power Reset means that you pull out the power source and pull in it again.

Samsung Electronics3-2

Adjustment and Adjustment

3-1-2. VCR Adjustment

1. VCR Adjustment Items

Items DescriptionAdj. value V-REF Adjustment Video reference EXTRA 7D Audio VCO PLL RECCUR 80 REC current A-REF1 80 Audio 48KHz mode A-REF2 80 Audio 44.1KHz mode A-REF3 80 Audio 32KHz mode HDSWP Adjustment Head Adjust switch ZOOMVR Adjustment Adjust center value in the ZOOM switch OPTION

DUBCUR 80

MODELOPTION RESERVED(fixed value)

DUB REC CURRENT

* MODELOPTION

Model Adj.value VP-D70 O2 VP-D73 C2

VP-D75 CA VP-D77 D2

2. How to adjust Video-Reference (V-REF).

1) Connect video output cable to wave form scope. The wave form scope must be connected to monitor.

(75Ω termination)

2) Set to the VCR adjustment mode.

3) Adjust VREF so that SYNC level of video output signal is PAL(43 IRE) and NTSC(40 IRE).

Model Adj.value SC-D70 O6 SC-D73 C6 SC-D75 CE

SC-D77 D6

PAL NTSC

Samsung Electronics 3-3

Adjustment and Adjustment

3. How to adjust Head Switching (HDSWP)

1) Connect No. 2 pin of WAFER CNR02 (HEAD-SW signal) for adjustment to CH1 of oscilloscope.

2) Connect No. 3 pin of WAFER CNR02 (ENVE-OUT signal) for adjustment to CH2 of oscilloscope.

3) Play standard tape.

4) Select HDSW of the video adjustment mode.

5) Adjust so that the time between HEAD-SW START and G1 START OF ENVE-OUT is 141µs (±10µs).

4. Center Value Adjustment of Zoom Switch

SP PLAY

0:00:00:00

NO MODE EVR EPR

ZOOMVR

80H 80H

S64 LOO

(Preset value of the Zoom SW)

(Adjusted value of the

Zoom SW)

1) Select ZOOMVR in the video adjustment mode.

2) Adjust ZOOM SW so that the switch is put in the middle of T and W.

3) Adjust ZOOMVR so that the current value of ZOOM SW is equal to the adjusted ZOOMVR value.

Samsung Electronics3-4

3-1-3. PRML Adjustment Preparation

1. How to set up PRMLAdjustment Mode

PRML Adjustment Setup

1. Press the Display button in VCR adjustment mode.

2. When monitor OSD appears as shown below, PRML adjustment mode has been activated successfully.

SP PLAY

Adjustment and Adjustment

Indicates address of adjusting item by using from 00 to 24.

MODE REG PRML EPR PLAY O OCO OCO

S64 LOO

2. Remote Control Button Location

Remote Control

Indicates operating mode of PRML.

Indicates preset values. Indicates the adjusted values.

3. Press the Address selection button(START/STOPbutton) to skip the next address in order to finish the adjustment and store data. After finishing the adjustment, you have to do power reset.

The PRML BER will be set to the right adjustment when shipping out video camera and PCB ASSY from

factory.

Samsung Electronics 3-5

Adjustment and Adjustment

3-1-4. PRML Adjustment

1. How to set up PRMLAdjustment Mode

Address Name

00 01

02 03 04

05 06 07 08 09

0C 0D

0E 0F 24

PGC/SQPI/FIRO IDO/DOD/ATFAQ/FIR4

GDH0/FIR1H0 GDH1/FIR1H1

L P G C / D AT F / P G C E N / T D O I / F I R 3 H 0

BPGC/FCLP/FIR3H1 LTG/LPGC/BPLG/TC13/TC2/FIR2 AT F F C / D O H G / AT F H G / H G S E L / S L E E P

D D O S C / S E F T H / D L Z I / TA D A P T / V I T ATFSEL/SYMC/DAMP

EZCNT/LPFBYP/PDTST/...

HLD/FCHO/BSTH0

CMXEN/FCH1/BSTH1 ATGH0/DOGCH0/TP1SEL ATGCH1/DOGCH1/TSEL

FRQ/RLZSEL/... AE/DZ/INTL/.../TWR

PB 0C0 0 0 0

3 0 0 3 0 0 4 0 0 6 0 0

8 0 5

#0 0 2 1 E

2 2 3 0 0 4

2 2 A

22A

F 6 5 8 6 0

0 0 F

FA 2

SEARCH/SLOW

0C0

0 0 0 3 0 0 3 0 0 4 0 0 6 0 0

8 0 5

#0 0

A 1 E

2 2 3 0 0 4

2 8 A 2 8 A

8 6 5 8 6 0 0 0 F

7 A 2

MODE

0C0

0 0 0 7 C 0 7 C 0

4 0 0

5 0 0

8 0 5

#0 0

228 2 2 3

2 C A 2 C A

865

F 6 5

8 6 0

0 0 F

FA F

0C0

0 0 0 7C0

7C0 4 0 0 5 0 0

8 0 5

# C 0 A 2 8

2 2 3 2 0 0

2 8 A 2 8 A

F 5 5

8 5 0 0 0 F

7 A F

SLOW

0C0

0 0 0

7C0

400

500 805

# 8 0

A28 223

200 28A

28A

F55

850

00F

7AF

2. BER Adjustment Specifications (Reference)

1) Get into the VCR adjustment mode. ;Press and hold the “F.ADV” button on the remote control and “ENTER” button on the video camera

at the same time for more than 10 seconds.

2) Turn offAdaptive. ............................................................................7A2 ;REG24

3) Find out the optional minimum BER value in REG. 12 BOOST.

start values ........................................................................................28A ;REG12

The optimum means the number error is less than 10 EA. ;Current SC-D70/VP-

D70 manufacturing standard

If the minimum value is as the followings, designate as the right values.

Min ........................................................................................................... ;Selection valueless

iess than 18 .......................................................................................18 ;REG12===24A

19 ........................................................................................................19 ;REG12===26A

20 ........................................................................................................20 ;REG12===28A

Samsung Electronics3-6

Adjustment and Adjustment

4) Find out the optimally minimum BER value in REG. 11 BOOST.

start values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28A ;REG11

The optimum means the number of error is less than 10 EA. ;Current SC-D70/VP-

D70 manufacturing

standard If the minimum value is as the followings, designate as the right values. [Add +2 to select the one.]

Min . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;Selection valueless

less than18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 ;REG11 ===24A

19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 ;REG11 ===26A

20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 ;REG11 ===28A

21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 ;REG11 ===2AA

5) Turn on Adaptive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ;REG24 ===FA2

6) Check the value is input to unit correctly.

Samsung Electronics 3-7

Adjustment and Adjustment

3-2 Camera Adjustment

Note: How to adjust the camera system.

1) EEPROM stores confirmed adjustment value of each adjustment step.

2) DSP (Digital Signal Process : ICP04-MAIN BOARD) digitalizes the camera signal.

3) When changing IC404-MAIN BOARD of EEPROM, readjust main board. While changing LCD board- and EVF board- always readjust each part. Since EEPROM stores confirmed adjustment value of each adjustment step, readjusting must be performed in order to store the changed data.

4) Adjust the following items after changing LENS ASSY. a. LENS ZOOM TRACK b. AUTO HALL c. AUTO IRIS

5) Adjust the following items after changing EEPROM and MAIN BOARD. a. LENS ZOOM TRACK b. AUTO HALL c. AE TARGET d. AUTO GAIN CONTROL e. AUTO IRIS f. AUTO WHITE BALANCE (indoor) g. AUTO WHITE BALANCE (outdoor)

3-2-1 Adjustment Preparation

1. Measuring Instrument

1) DC power supply

2) Oscilloscope

3) PALvectorscope, NTSC Vectorscope

4) PALwave form monitor, NTSC wave fonitor

5) PALTV or monitor, NTSC TV or monitor

6) Color bar chart Gray scale chart

2) Camera Pcb configuration

1) Main PCB

2) CCD PCB

3) EVF PCB

4) LCD PCB

3. Before you start

1) Use the buttons on the remote control when adjusting camera.

2) Press the "START/STOP" button when storing confirmed adjustment value of each adjustment step in EEPROM.

3) There is a flicker on screen after finishing each adjustment step.

4) To clear the adjustment mode, pull out the power source.

Samsung Electronics3-8

4. Functions of each button on the Remote Control

Adjustment and Adjustment

Button

START/STOP (Confirm) STOP (Data Down)

PLAY (Data Up)

FF (Mode Up)

REW (Mode Down)

SELF TIMER

In adjustment mode, the buttons of the remote control is as the followings.

Stores changed value in the adjustment and auto adjustment mode.

Changes data in the adjustment state.

Changes mode.

Pre-confirm

Description

Note: In service adjustment mode, button names are different from those in customer function control

mode.

e.g.) "START/STOP" is the same as "Confirm".

5. How to set up the camera adjustment mode

STEP 1

1) Connect the power source (battery/DC cable).

2) Open Housing from video

camera.

STEP 2

Press and hold the "EDIT(+)" button and "ENTER" button on the video camera at the same time for more than 5 seconds.

3) Set the "POWER(CAMERA/PLAYER)" switch to "CAMERA" position.

STEP 3

4) The OSD appears.

Monitor OSD shows "16D XX XX". Then camera adjustment mode has

Note : "XX" indicates variable values.

Samsung Electronics 3-9

been activated successfully.

Adjustment and Adjustmentnt

Address SC-D67/70 VP-D70 NAME

0 0 0 H1_INV 1 0 0 HCNT_SET 2 0 0 H1_DLY 3 0 4 SHP_DLY 4 0 0 ADCLK_DLY 5 0 0 SHP_WITH 6 A7 A6 V_SKIP 7 0 0 FLD_INV 8 0 0 Hi_SHUT_VAL 9 0 0 Lo_SHUT_VAL A 5 5 FCM_Addr_Lo B 0 0 FCM_Addr_Hi C 1 1 ITUR601 D 0 3 RG_SEL E 0 0 DAC0_PIN51 F 0 0 DAC1_PIN52

10 FF FF H_ZM_RATIO

11 8 0 H_ZM_START 12 0 0 H_ZM_SUB 13 0 0 V_ZM_RATIO 14 1 1 V_ZM_SUB_Odd 15 5 4 V_ZM_SKIP

16 0 0 YC_DLY

17 40 40 Linear/Spline 18 1 1 UVCLK_INV 19 B5 B5 H_Mirr_Addr 1A 68 68 F_Mirr_Addr 1B C0 0 H_MOSAIC 1C C0 C0 V_MOSAIC 1D 38 38 HSIZE_AUTO_ZM 1E 38 38 VSIZE_AUTO_ZM 1F 0 0 H1_INV 20 10 13 ADCLK_DLY 21 FB FB P_OFFSET 22 0 0 P_THR 23 0 0 P_RAM_Hi 24 0 0 P_RAM_Mdl 25 0 0 P_RAM_Lo 26 20 20 P_FIND_CNT 27 0 0 P_WH_START 28 0 0 P_WH_END 29 0 0 P_WV_START 2A 0 0 P_WV_END 2B 0 0 P_TEST 2C 0 0 PATTERN_GEN 2D 0 0 2E 0 0 2F 0 0 30 AD AD YV_APT_BKTH 31 E E YH_APT_GN_POSI

Samsung Electronics3-10

Address SC-D67/70 VP-D70 NAME

32 CE CE YV_APT_GN_POSI 33 2 2 YAPT_NSlice 34 D8 D8 Y_Hi_REF 35 68 68 EDGE_REF 36 E0 E0 YV_APT_LPF_SEL 37 6 6 YAPT_NS_AftGMA 38 F8 F8 YWC 39 7C 7C Y_APT_Clip 3A 62 62 YD_ENH_TH/GAIN 3B B9 A9 YV_APT_GN_NEGA 3C 69 69 YH_APT_GN_NEGA 3D 8F 8F HiFALL/EGFALL 3E 0 0 3F 0 0 40 98 98 Y_GAIN 41 90 90 DSE_Y_GAIN 42 8A 8E C_GAIN 43 0 0 YART 44 C0 C0 YH_PST/EMBO_GN 45 52 52 PSTL_OFFET 46 35 35 EMBO_OFFSET 47 60 60 GRP_DLY 48 0 0 49 0 0 4A 0 0 4B 0 0 4C 0 0 4D 0 0 4E 0 0 4F 0 0 50 A8 A8 DYV_APT_BKTH 51 C C DYHAPT_GN_POSI 52 50 50 DYHAPT_GN_NEGA 53 C C DYVAPT_GN_POSI 54 B0 A0 DYVAPT_GN_NEGA 55 10 10 DY_APT_NSlice 56 70 70 DY_APT_Clip 57 0 0 DYHiLight_GN 58 6 6 DYAPT_NS_GAM 59 62 62 DYDet_EN_TH/GN 5A 10 10 DYVAPT_LPF_SEL 5B 36 36 DWH_START 5C A5 A5 DWH_END 5D 2D 2D DWV_START 5E 7F 7F DWV_END 5F 0 0 60 6 6 S1/S2_SEL 61 46 46 CR_COEF 62 66 66 CB_COEF 63 A 8 CRDS

Adjustment and Adjustment

Samsung Electronics 3-11

Adjustment and Adjustment

Address SC-D67/70 VP-D70 NAME

64 0 6 CBDS 65 0 0 CGDS 66 0 0 CRCB_WB_Hi 67 32 4C CRWB

68 AC B5 CBWB

69 24 20 CGWB 6A 59 59 CRRG 6B D9 D9 CBRG

6C F2 F2 CRBG

6D 72 72 CBBG 6E 0 0 6F 0 0 70 90 9C C_RY_GP

71 90 88 C_RY_GN 72 12 28 C_RY_HP 73 12 12 C_RY_HN

74 5E 70 C_BY_GP

75 58 68 C_BY_GN

76 17 5 C_BY_HP 77 A 8 C_BY_HN

78 8 0 C_KEY_Slope1

79 10 0 C_KEY_Slope2

7A 0 0 CKEY_Slpe12_Hi

7B 0 0 C_HUE_FIX 7C 0 0

7D 0 0

7E 0 0

7F 0 0

80 2 2 Y_GAMMA1

81 7 7 Y_GAMMA2

82 12 12 Y_GAMMA3

83 28 28 Y_GAMMA4

84 44 44 Y_GAMMA5

85 68 68 Y_GAMMA6

86 9A 9A Y_GAMMA7

87 EA EA Y_GAMMA8

88 2 2 C_GAMMA1

89 7 7 C_GAMMA2

8A 12 12 C_GAMMA3

8B 28 28 C_GAMMA4

8C 44 44 C_GAMMA5

8D 68 68 C_GAMMA6

8E 9A 9A C_GAMMA7

8F EA EA C_GAMMA8

90 48 47 AF_W1H_STRT 91 B0 AF AF_W1H_END

92 23 2A AF_W1V_STRT

93 5A 6C AF_W1V_END

94 14 13 AF_W2H_STRT

95 E4 E3 AF_W2H_END

Samsung Electronics3-12

Adjustment and Adjustment

Address SC-D67/70 VP-D70 NAME

96 8 9 AF_W2V_STRT 97 76 8E AF_W2V_END 98 14 13 AE_W1H_STRT 99 E4 E3 AE_W1H_END 9A 8 9 AE_W1V_STRT 9B 76 8E AE_W1V_END 9C 48 47 AE_W2H_STRT 9D B0 AF AE_W2H_END 9E 23 2A AE_W2V_STRT 9F 5A 6C AE_W2V_END A0 17 16 AWB_H_STRT A1 E7 E6 AWB_H_END A2 8 9 AWB_V_STRT A3 76 8E AWB_V_END A4 FF FF AE_THR_HiGH A5 0 0 AE_THR_LOW A6 B0 A0 AWB_THR_HiGH A7 40 40 AWB_THR_LOW A8 B0 B0 AF_Clip_THR A9 F0 F0 AE_Clip_THR AA 4 4 OZONE_SEL AB 0 0 AC 0 0 AD 0 0 AE 0 0 AF 0 0 B0 0 0 DIS-DIS ON B1 98 98 DIS-FRAME B2 80 C0 DIS-DVC B3 0 0 DIS-KX B4 0 0 DIS-KY B5 86 8C DIS_SP_H B6 14 19 DIS_SP_V B7 D2 D2 DIS_WIDTHL B8 2 2 DIS_WIDTHH B9 F2 20 DIS_HEIGHTL BA 0 1 DIS_HEIGHTH BB 50 4A DIS_PIP_HSPL BC 2 2 DIS_PIP_HSPH BD 90 A7 DIS_PIP_VSPL BE 0 0 DIS_PIP_VSPH BF 2F 2F DIS_PBOX_HSPL C0 2 2 DIS_PBOX_HSPH C1 BF BF DIS_PBOX_VSPL C2 0 0 DIS_PBOX_VSPH C3 2 2 DIS_PIP_DSP_HADJ C4 2 2 DIS_PIP_DSP_VADJ C5 0 0 DIS_PBOX_DSP_HADJ C6 0 0 DIS_PBOX_DSP_VADJ C7 66 6B DIS_OUT_OFF

Samsung Electronics 3-13

Adjustment and Adjustment

Address SC-D67/70 VP-D70 NAME

C8 66 6B DIS_OUT_OFF1

C9 5 5 DIS_GR_MODE

CA 14 13 DIS_CLK2_SEL

CB 80 C0 DIS_SIS2_SEL0

CC 25 25 DIS_OSD_SEL

CD 0 0 DIS_PIP_SIS2_SEL

CE 70 76 DIS_DCLP_R

CF 78 7E DIS_DCLP_F

D0 4 8 DIS_YHAFS

D1 C0 C0 DIS_APCLP

D2 8 8 DIS_APSC

D3 0 0 DIS_ECST

D4 0 0 DIS_ECSG

D5 83 83 DIS_G1

D6 8F 8D DIS_G0 D7 0 0 DIS_HUE1_OFF

D8 0 0 DIS_ECHUE1

D9 0 0 DIS_ECHUE2

DA 10 10 DIS_APSCV

DB F0 F0 DIS_WV1

DC 90 90 DIS_WH1 DD 4 4 DIS_OVERLAY

DE 0 0 DIS_T0

DF 10 10 DIS_MAN_T0

E0 2 2 DIS_TIIR_TH

E1 0 0 DIS_LINEAR

E2 0 0 DIS_GA0

E3 8 8 DIS_GA1

E4 10 10 DIS_GA2

E5 18 18 DIS_GA3

E6 20 20 DIS-GA4

E7 30 30 DIS_GA5

E8 40 40 DIS_GA6

E9 60 60 DIS_GA7

EA 7F 7F DIS_GA8 EB 0 0 DIS_GB0

EC 8 8 DIS_GB1

ED 10 10 DIS_GB2

EE 18 18 DIS_GB3

EF 20 20 DIS_GB4 F0 30 30 DIS_GB5

F1 40 40 DIS_GB6

F2 60 60 DIS_GB7

F3 7F 7F DIS_GB8

F4 43 43 DIS_SP_HM F5 14 1A DIS_SP_VM

F6 DC 7 DIS_HEIGHTML

F7 0 1 DIS_HEIGHTMH

F8 C6 F6 DIS_WIDTHML F9 2 2 DIS_WIDTHMH

Samsung Electronics3-14

Address SC-D67/70 VP-D70 NAME

FA FB FB DIS_KXMD FB FB FB DIS_KYMD FC F7 F7 DIS_OSD_MODE FD C1 C1 DIS_DIS_ENX FE 0 0 DIS_OXL FF 0 0 DIS_OXH 100 0 0 DIS_OY 101 0 0 DIS_CX 102 0 0 DIS_CY 103 22 22 DIS_AX/AY 104 33 33 DIS_AUTO_CENT 105 88 88 DIS_VGGAINX 106 21 21 DIS_VGSTEP 107 48 48 DIS_THR_SEL 108 11 11 DIS_CXY_BIAS 109 A5 A5 DIS_MATCHX_EN 10A A5 A5 DIS_MATCHY_EN 10B 68 68 DIS_SHMFBC 10C E0 E0 DIS_MVIIR_EN 10D 24 24 DIS_OZNSEL 10E 73 8A DIS_OAEVE_WB 10F 1D 21 DIS_OAEVS_WB 110 E5 E6 DIS_OAEHE_WB 111 15 19 DIS_OAEHS_WB 112 57 69 DIS_OAEVE_WA 113 21 27 DIS_OAEVS_WA 114 B1 B2 DIS_OAEHE_WA 115 49 4C DIS_OAEHS_WA 116 57 69 DIS_OAFVE_W2 117 21 27 DIS_OAFVS_W2 118 B1 B2 DIS_OAFHE_W2 119 49 4C DIS_OAFHS_W2 11A 73 8A DIS_OAFVE_W1 11B 6 6 DIS_OAFVS_W1 11C E5 E6 DIS_OAFHE_W1 11D 15 19 DIS_OAFHS_W1 11E 0 0 DIS_OYL_TH 11F FF FF DIS_OYH_TH 120 80 80 DIS_OAECLIP_TH 121 F0 F0 DIS_OAFCLIP_TH 122 0 0 DIS_PFCNT_M1 123 10 10 DIS_PTHRESH 124 0 0 DIS_POFFSET 125 3 3 DIS_PCMD 126 0 0 DIS_PRAMIL 127 0 0 DIS_PRAMIM 128 0 0 DIS_PRAMIH 129 0 0 DIS_PRAMA_M1 12A 0 0 12B 0 0

Adjustment and Adjustment

Samsung Electronics 3-15

Adjustment

Address SC-D67/70 VP-D70 NAME

12C 0 0 12D 0 0 12E 0 0 12F 0 0 130 0 0 CDS_CONTROL1H 131 0 0 CDS_CONTROL1L 132 0 0 CDS_AGCH 133 85 85 CDS_AGCL 134 0 0 CDS_HALL_GAINH 135 25 25 CDS_HALL_GAINL 136 0 0 CDS_HALL_REFH 137 C8 C8 CDS_HALL_REFL 138 0 0 CDS_COARSE_OFFSETH 139 0 0 CDS_COARSE_OFFSETL 13A 0 0 CDS_FINE_OFFSETH 13B 0 0 CDS_FINE_OFFSETL 13C 0 0 CDS_VBH 13D 0 0 CDS_VBL 13E 0 0 CDS_OPTBLACKH 13F 4 4 CDS_OPTBLACKL 140 0 0 CDS_HOT_PIXELH 141 1 1 CDS_HOT_PIXELL 142 0 0 CDS_COLD_PIXELH 143 0 0 CDS_COLD_PIXELL 144 0 0 CDS_CONTROL2H 145 4 4 CDS_CONTROL2L 146 0 0 CDS_BLANKH 147 0 0 CDS_BLANKL 148 0 0 CDS_DLY1_ADCLKH 149 0 0 CDS_DLY1_ADCLKL 14A 0 0 CDS_DLY2_SV_SRH 14B 0 0 CDS_DLY2_SV_SRL 14C 1 1 CDS_TESTH 14D 80 80 CDS_TESTL 14E 0 0 14F 0 0 150 0 0 MOTOR_HEADER 151 18 18 MOTOR_STARTTIME 152 1 1 MOTOR_DRIVETIME 153 8 8 MOTOR_CHOPPING 154 40 40 MOTOR_EXTPIN 155 44 44 MOTOR_EVRA 156 44 44 MOTOR_EVRB 157 0 0 MOTOR_CHECKSUM 158 0 0 159 0 0 15A 0 0 15B 0 0 15C 0 0 15D 0 0

Samsung Electronics3-16

+ 76 hidden pages