Samsung UN75F6400AF User Manual
Attach the TV to
the Stand
Step
Welcome to your new Smart TV!
QUICK START
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
GUIDE
BN68-05123A-00
Connect video
devices
1
Step
2
Insert the
batteries into the
remote control
Step
3
Power on and
start the initial
setup
Step
4
Included in this box
Remote Control Stand Parts and Cables
Smart Touch Control Power cord IR extender Stand Cover
Batteries (AAA x 2) Wall mount adapter Cable manager
x 4
x 2
x 2
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1
Also included: Cleaning cloth, user manual, regulatory guide,
3D Active Glasses
x4 (M4 X L12)
Insert 4 screws and secure the stand to the TV.
4
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
Put a leg and screws off to assemble the stand
out of the box.
2
x 2
Leg
3
x 4
Screws
Insert the stands into the grooves on both sides
on the bottom of the TV’s back.
Place the stand covers on the stands and press
them until they click in place.
5
Put up the TV with assistance from a person
after attaching the stands to the TV.
6
AIR/CABLE
Connect the IR extender to the IR Out port
to control external devices connected to
the TV using the Smart Touch Control. For
more detailed information, refer to the
"Universal Remote Control Setup" section
on the User manual.
Step 2 Connect video devices
We suggest using HDMI connections whenever possible for the best picture quality.
The displayed image may differ depending on the model.
USB Connections
You can connect USB storage devices
to the USB jacks and enjoy personal
photos, videos, and music.
Best Connection : HDMI
We suggest using HDMI whenever
possible.
HDMI 1 is the default port for a cable
HDMI Cable
HDMI Port
or satellite set-top box.
Use the other ports for Blu-ray
players, game consoles, and other
devices.
Connect the IR extender to the IR Out port
to control external devices connected to
the TV using the Smart Touch Control. For
more detailed information, refer to the
"Universal Remote Control Setup" section
on the User manual.
USB
(5V 0.5A)
USB
(HDD 5V 1A)
USB
(TV CAMERA)
HDMI IN 3
HDMI IN 2
(ARC)
HDMI IN 1
(STB)
ANT IN
AIR/CABLE
HDMI IN 4
(DVI)
IR OUT
AUDIO OUT
Power Input
Wired Ethernet
COMPONENT
/ AV IN
LAN
VIDEO
AUDIO
DIGITAL
AUDIO OUT
(OPTICAL)
EX-LINK
You can connect home theater
systems to the OPTICAL or AUDIO
OUT ports.
Good Connection : Component and AV
Match the colors on your device's cables to the colors
on the jacks. Connect the yellow composite video out
connector from an AV device to the green AV IN jack.
AV also accepts component video
connections (red/green/blue).
+
Connect the cable from the antenna
or cable TV outlet.
Step 3 Insert the batteries into the remote control
To open, put your plastic card into the notch.
Step 4 Power on and start the initial setup
The AUDIO OUT port can connect to
a speaker.
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and
jacks are shown below.
HDMI
USB
Optical
Troubleshooting
Cable Plugs Ports / Jacks
Warning
Do not plug cables in upside down.
Be sure to check the orientation of
the plug before plugging it in.
Information required:
• Wi-Fi network password (if you use one)
• Zip code
• Cable or satellite provider info
The TV must be connected to the Internet to use the Smart Features. If you have a wireless
network, we recommend that you confirm that your network router is switched on and working
before you start the initial setup. If you have a wired network, we recommend that you connect
the TV to the network with a CAT 7 cable before you begin.
Power on to start the initial setup.
Connect to your network (wired or wireless)
Search for channels from
your TV service provider
or
After you have finished the initial setup, you can configure the universal remote control settings.
These settings let the Smart Touch remote control external devices connected to the TV, such as a
set-top box or Blu-ray player.
The stand is wobbly or crooked
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
My remote, gesture, or voice controls don't work
The TV ships with protective stickers covering some of the sensors. Make sure all of them have
been removed.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
If you experience issues, please do not take the TV back
to the store.
\
In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com/spsn for support and warranty service.
For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.
Congratulations on your new Smart TV!
Loading...