Samsung UN37C5000, BN68-02625A-02, UN46C5000, UN32C5000 User Manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger
Customer Care Center
Web Site Address
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Road Ridgeeld Park, NJ 07660-0511
LED TV user manual
LED TV
user manual
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
BN68-02625A-02
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no nexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States: 1-800-SAMSUNG (1-800-726-7864) – In Canada: 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display a full screen image.
• Reducing brightness and contrast will help to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
2
4 inches
English
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Contents
Getting Started
y List of Features ........................................................ 4
y Accessories .............................................................. 4
y Install the Stand ........................................................ 5
y Viewing the Control Panel ......................................... 6
y Viewing the Remote Control ...................................... 7
y Connecting to an Antenna ........................................ 8
y Plug & Play (Initial Setup) ........................................... 8
Connections
y Connecting to an AV Device ...................................... 9
y Connecting to an Audio Device ...............................11
y Connecting to a PC ................................................ 11
y Changing the Input Source .....................................13
Basic Features
y How to Navigate Menus .......................................... 13
y Channel Menu ........................................................ 14
Seeing Channels 14 Using Favorite Channels 14 Memorizing Channels 14 Editing Channels 15 Other Features 15
y Picture Menu .......................................................... 16
Changing the Preset Picture Mode 16 Adjusting Picture Settings 16 Economical Solutions 16 Changing the Picture Options 17 Setting up the TV with Your PC 18
y Sound Menu ........................................................... 19
Changing the Preset Sound Mode 19 Adjusting Sound Settings 19 Sound Settings 19
y Setup Menu ............................................................ 20
Setting the Time 20 Using the Sleep Timer 20 Setting the On / Off Timer 20 Locking Programs 21 Other Features 22 Picture In Picture (PIP) 23
y Support Menu ......................................................... 24
Advanced Features
y Network Connection ............................................... 25
Connecting to a Wired Network 25 Connecting to a Wireless Network 27
y Media Play .............................................................. 31
Connecting a USB Device 31 Connecting to your PC through a network 31 Screen Display 33 Playing Multiple Files 36 Media Play - Additional Functions 36
y Anynet+ .................................................................. 38
Setting Up Anynet+ 39 Switching between Anynet+ Devices 39 Recording 39 Listening through a Receiver 40 Troubleshooting for Anynet+ 40
y AllShare .................................................................. 41
About AllShare 41 Setting Up AllShare 41
Other Information
y Assembling the Cables ........................................... 43
y Installing the Wall Mount .........................................44
y Anti-theft Kensington Lock ...................................... 45
y Securing the TV to the Wall ..................................... 46
y Troubleshooting ......................................................47
y License ................................................................... 49
y Specifications ......................................................... 50
y Dimensions .............................................................51
y Index ...................................................................... 52
ENGLISH
TOOLS
t
This function can be used by pressing the
TOOLS button on the remote control.
Check the Symbol!
Note Step by Step Guide
Indicates additional information. Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3

Getting Started

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver. y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 31). y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 41). y Self Diagnosis: You can check picture and sound operate normally (p. 24).

Accessories

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
The items' colors and shapes may var y depending on the models.
y Remote Control (BN59-01041A) & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide
(M4 X L8)
Blanking Bracket & Screw (1EA) Cable Tie Holder-Wire stand
(BN96-12031D) (BN61-05596A) (BN61-05491A)
y Cleaning Cloth (BN63-01798B) y Power Cord
Holder-Ring (4EA) Holder-Wire (3EA) Power Cord Clamp
(BN61-05280A) (BN61-05373A) (AA65-30023A)
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
4
English
See separate guide for installing the stand.
s
s
s
s
s
s
s
s
s
s

Install the Stand

01 Getting Started
s
s
s
s
s
Stand (1EA) Guide Stand (1EA) Screws (10EA)
Follow the steps below to connect the TV to the stand.
Screws (M4 X L16)
Guide Stand
Stand
Rear
s
s
s
s
Top view
s
Front
Rear
1. Connect the Guide Stand to the Stand using five screws (M4 X L16) as shown.
Screws (M4 X L8)
(A)
(B)
5EA (M4 X L16)
5EA (M4 X L8)
2
1
2. With your TV upright, connect the TV to the Stand.
3. Fasten two screws (M4 X L8) at position 1, and then
fasten three screws (M4 X L8) at position 2.
NOTE
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
x
one side.
English
5
Getting Started
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
y Maximum thickness - 0.55 inches (14mm)

Viewing the Control Panel

The product color and shape may vary depending on the model.
Speakers
Remote control sensor Aim the remote control towards this spot on the TV.
SOURCE
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
y
z
P
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
E
(Power)
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER
Adjusts the volume. In the OSD, use the and buttons on the remote control.
Changes the channels. In the OSD, use the and buttons on the remote control.
Turns the TV on or off.
Remote control sensor
E
button on the remote control.
y
buttons as you would use the
z
buttons as you would use the
Power Indicator
6
English

Viewing the Remote Control

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
01 Getting Started
Turns the TV on and off.
Displays and selects the available video
sources (p. 13).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and
“3”.
Adjusts the volume.
Brings up the OSD.
Views Media Play (USB) (p. 31).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel List,
Media Play (USB) menu, etc.
Use these buttons in Media Play (USB)
and Anynet+ (HDMI) modes (p. 31, 38).
(: Controls recording for Samsung
recorders that have the Anynet+ feature)
POWER
SOURCE
CH LIST
MENU
MEDIA.P
TOOLS
RETURN
A B C D
S.MODE
SLEEP
P.MODE
P.SIZE
ON/OFF
PRE-CH
FAV.CH
INFO
EXIT
MTS
CC
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to ON will reduce the battery usage time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the channel list on the screen (p. 14). Displays Favorite Channel Lists on the screen (p. 14).
Displays information on the TV screen.
Selects the on-screen menu items and changes the values seen on the menu.
Exits the menu.
S.MODE: Press to select the sound
mode (p. 19).
SLEEP: Automatically shuts off the TV at
a preset time (p. 20).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP broadcast) (p. 19).
P.MODE: Press to select the picture
mode (p. 16).
P.SIZE: Selects the picture size (p. 17). CC: Controls the caption decoder (p.
22).
Installing batteries (Battery size: AAA)
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the per formance of the remote
x
control. Avoid use when nearby fluorescent lights or neon signs.
The color and shape may vary depending on the model.
x
English
7
Getting Started
POWER
INFO GUIDE

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
Selecting a language
1
Selecting Store Demo
2
or Home Use
Selecting an antenna
Press the or button, then press the ENTER Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Press the or button, then press the ENTER
E
button.
E
button. Select Air, Cable or Auto.
Cable
ANT OUT
P
3
Selecting a channel
4
Setting the
5
Clock Mode
Viewing the
6
HD Connection Guide. Enjoy your TV.
Press the or button, then press the ENTERE button. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel Auto Program (p. 14).
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone. y Manual: Allows you to manually set the current date and time (p. 20).
The connection method for the best HD screen quality is displayed.
Press the ENTER
E
button.
7
If You Want to Reset This Feature...
O
MENUm Setup Plug & Play ENTER
English
8
E

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.
HDMI Cable (Not Supplied)
02 Connections
Device
HDMI OUT
Device
HDMI to DVI Cable (Not Supplied)
WR
Red White
HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
x
Audio Cable (Not Supplied)
W
R
DVI OUT
AUDIO OUT
R-AUDIO-L
player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
Be sure to use an HDMI cable with a thickness of 14 mm or less.
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
x
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
x
occur.
English
9
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Video Cable
(Not Supplied)
W
R
Red
White
Y
Yellow
Device Device
When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).
For better picture quality, the Component connection is recommended over the A /V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
Y
Y
VIDEO OUT
W
R
W
R
AUDIO OUT
R-AUDIO-L
Audio Cable
(Not Supplied)
AUDIO OUT
R-AUDIO-L
WR R GB
RGB W R
COMPONENT OUT
PR
PB G
Component Cable
(Not Supplied)
RGBWR
RedRed
BlueWhite
Green
EX-LINK: Connector for service only.
10
English

Connecting to an Audio Device

R-AUDIO-L
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
Audio Cable (Not Supplied)
Optical Cable (Not Supplied)
DIGITAL AUDIO OUT (OPTICAL)
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
x
of both the TV and the system.
5.1 CH (channel) audio is available when the T V is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
x
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theatre.
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
x
volume level with the amplifier's volume control.
Red White
AUDIO IN
OPTICAL
02 Connections
WR
Amplifier,
DVD home theater
Digital Audio System
Using an HDMI/DVI cable or a D-sub cable

Connecting to a PC

HDMI to DVI Cable
(Not Supplied)
Audio Cable (Not Supplied)
D-Sub Cable (Not Supplied)
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
English
11
Connections
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV CEA
640 x 350 720 x 400
640 x 480 832 x 624
1152 x 870
720 x 576 1152 x 864 1280 x 720 1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864
1280 x 1024 1280 x 1024
1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p 67.500 60.000 148.500 +/+
Horizontal Frequency
(KHz)
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
Vertical Frequency
(Hz)
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
Sync Polarity
(H / V)
+/-
-/+
-/-
-/-
-/-
-/+
-/+
-/+
-/+
-/-
-/-
-/­+/+ +/+ +/+
-/-
-/­+/+ +/+ +/+ +/+ +/+
-/+
-/+ +/+ +/+
-/+
-/+
-/+
-/+
-/-
NOTE
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set may operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
x
English
12
F
S
POWER
SOURCE
ON/OFF
PRE-
CH
C
INFO
C
H LIST

Changing the Input Source

SOURCE
Source List
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
O
MENUm Input Source List ENTER
E
■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
You can only choose external devices that are connected to the TV. In the Source List, connected inputs will be highlighted.
In the Source List, PC is always activated.

Basic Features

Edit Name
O
MENUm Input Edit Name ENTER
■ VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set the TV to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
E
03 Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.
MENU
1
TOOL
2
3
1 MENU button: Displays the main on-screen menu. 2 ENTER
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.
RETURN
E
/ Direction button: Move the cursor and
AV.CH
EXIT
4
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU
m
1
/ Select an icon with the or
2
ENTER
3
/
4
/
5
ENTER
6
EXIT
e
The main menu options appear on the screen:
Picture, Sound, Channel, Setup, Input, Application, Support.
button.
E
Press ENTERE to access the sub-menu.
Select the desired submenu with the or button.
Adjust the value of an item with the or button. The adjustment in the OSD may differ depending on the selected menu.
E
Press ENTERE to confirm the selection.
Press EXIT.
7
English
13
Basic Features
B

Channel Menu

¦ Seeing Channels
Channel List
Add, delete or set Favorite channels and use the program guide for digital broadcasts.
O
MENUm → Channel → Channel List
ENTER
Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by
pressing the / and ENTER Then you can watch the selected channel.
Added Channels
*
programs.
Using the color buttons with the Channel List.
x x
number.
x
Select desired channels and press the Yellow button to set all the selected channels at the same time. The
c k
x
T
x
(The Options menus may differ depending on the situation.)
Channel Status Display Icons
E
E
buttons.
6 Air 6-1 * TV #6
7 Air
8 Air 9 Air
9-1 * TV #9 10 Air
10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select kPage
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
Red (Antenna): Switches to Air or Cable. Green (Zoom): Enlarges or shrinks a channel
Yellow (Select): Selects multiple channel lists.
mark appears to the left of the selected channels.
(Page): Move to next or previous page.
(Tools): Displays the Channel List option menu.
CH LIST
T
Tools
¦ Using Favorite Channels
O
MENUm Channel Channel List ENTER
E
Add to Favorite / Delete from Favorite
t
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu respectively.
6 Air
Added Channels
To show all Favorite channels, click on the button shown on the right.
6-1 * TV #6
7 Air
8 Air 9 Air
9-1 * TV #9 10 Air
10-1 * TV #10 11-1 * TV #11
Air Antenna B Zoom Select kPage
Delete
Add to Favorite Timer Viewing Channel Name Edit Select All
T
Tools
FAV.CH
¦ Memorizing Channels
O
MENUm Channel ENTER
Antenna (Air / Cable)
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
E
t
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
Icons Operations
A channel selected.
c
A channel set as a Favorite.
*
A reserved Program.
)
English
14
NOTE
When selecting the Cable TV system: STD, HRC
x
and IRC identify various types of cable TV systems. Contact your local cable company to identif y the type of cable system that exists in your particular area. At this point, the signal source has been selected.
After all the available channels are stored, it starts
x
to remove scrambled channels. The Auto Program menu then reappears.
¦ Editing Channels
O
MENUm Channel Channel List ENTER
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your own channel name.
E
¦ Other Features
O
MENUm Channel ENTER
E
Clear Scrambled Channel
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
2. Press the button to select Yes.
3. Press the ENTER
This function is only available in Cable mode.
E
button to select Stop.
E
button.
Add / Delete: Delete or add a channel to display the channels you want.
NOTE
All deleted channels will be shown on the All
x
Channels menu. A gray-colored channel indicates the channel
x
has been deleted. The Add menu only appears for deleted
x
channels. Delete a channel from the Added Channels or
x
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be displayed automatically at the reserved time. Set the current time first to use this function.
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter the date and time.
If you selected Once, Every Week or Everyday in Repeat, you can enter the date you want.
4. Select OK, then press the ENTER
done.
NOTE
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
x
Programmed menu. When a digital channel is selected, press the
x
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or more channels are selected.
E
button when
03 Basic Features
Channel List
Channel List Option Menu Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Programmed
(in Channel List) You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here. Highlight a program and press the TOOLS button to display Options.
Change Info: Change a show you have reserved to watch. Begin with step 3 of “Timer Viewing,” above.
Cancel Schedules: Cancel a show you have reserved to watch.
This deletes the highlighted or selected program(s).
English
15
Basic Features
Information: Display a show you have reserved to watch. (You can also change the reservation Information.)
Alternatively, you can view Information by highlighting a program and pressing the
ENTERE button.
Select All / Deselect All: Select or deselect all reserved programs.
Fine Tune
(analog channels only) If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Settings are applied to the channel you're currently watching.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset.

Picture Menu

¦ Changing the Preset Picture Mode
O
MENUm Picture Mode ENTER
E
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Movie: Suitable for watching movies in a dark room.
P.MODE
¦ Adjusting Picture Settings
O
MENUm Picture ENTER
E
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
NOTE
When you make changes to Backlight, Contrast,
x
Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
In PC mode, you can only make changes to
x
Backlight, Contrast and Brightness. Settings can be adjusted and stored for each
x
external device connected to the TV.
¦ Economical Solutions
The Eco Function can be used to enhance your power savings.
Eco Solution
O
MENUm Picture Eco Solution ENTER
■ Energy Saving (Off / Low / Medium / High / Picture Off / Auto): This adjusts the brightness of the TV in
order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except the volume button to turn on the screen.
Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.
If you adjust the Backlight, the Eco Sensor will be set to Off.
Min Backlight: When Eco sensor is On, the minimum screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it's not receiving a signal.
Disabled when the PC is in power saving mode.
E
16
English
Loading...
+ 36 hidden pages