Thank you for purchasing a Samsung Video Cassette Recorder (VCR).
Your Owner’s Instructions contain much valuable information on setting up and
using your VCR. Please take the time to read them as they will help you take full
advantage of your VCR’s features.
The instructions in this manual are for models, SV-L620K, SV-L80K and SV-L30K.
Before you start reading this manual please check your model number.
It is displayed on the rear of the VCR.
★
-
(SV-L620K): Exceptions only for a certain model, for example
SV-L620K.
- Gray shaded areas marked with a star indicate instructions that are
only relevant to one model.
Features Chart
FeatureSV-L620K SV-L80K SV-L30K
IPC (Intelligent Picture Control)
Format 16:9
Changing recording speed (SP/LP)
Connecting a Decoder for scrambled
PAY TV broadcasts
Connecting an RCA Audio/Video cable
Dual VCR/TV remote Control
SHUTTLE Dial
Audio Dubbing a pre-recorded Cassette
Hi-Fi & A2/NICAM
■ Using the Tape Counter ................................................................................ 38
◆ ADVANCED RECORDING FEATURES
■ Connecting an RCA Audio/Video Input cable................................................ 39
■ Using the Assemble Edit Function................................................................. 40
■ Recording from Another VCR or Camcorder................................................. 40
■ Audio Dubbing a Pre-recorded Cassette (SV-L620K Only)........................... 41
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE VCR. Refer to service personnel.
Do NOT expose the VCR to
extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the VCR to
direct sunlight.
Do NOT expose the VCR to
any liquids.
◆ OTHER FUNCTIONS AND USEFUL RECOMMENDATIONS
■ Using the TV Buttons on the Remote Control (SV-L620K Only)................... 42
■ Auto Power Off.............................................................................................. 43
You have just purchased a SAMSUNG Video Cassette Recorder (VCR).
Together with your VCR, you will find the following accessories in the box.
REMOTE CONTROL
OWNER’S INSTRUCTIONS
COAXIAL CABLE
GBGB
98
TV
AV2 (DEC./EXT.)
AV1 (EURO AV)
Deciding How to Connect Your VCR
TV
R/D
L/G
AUDIO
OUT/SORTIE
VIDEO AUDIO
AUX
AV2 (DEC./EXT.)
AV1 (EURO AV)
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connecting Your VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛ Make sure that both the television and the VCR are
switched off
before connecting the cables.
AV2 (DEC./EXT.)
TV
2
AV1 (EURO AV)
OUT/SORTIE
R/DAUDIOL/G
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ω coaxial socket marked on the
ConnectorLocationTypeDirectionRecommended Use
GBGB
AV1RearSCARTIn/Out◆ Television
AV2RearSCARTIn◆ Decoder for scrambled Pay TV
AUXFrontAudio/Video RCAIn◆ Audio system
★
(SV-L620K Only)
AUXFrontAudio/Video RCAIn◆ Audio system
★
(SV-L80K/SV-L30K Only)
◆ Satellite receiver
◆ Other VCR
broadcasts
Example
:CANAL+.
◆ Satellite receiver
◆ Other VCR
◆ Camcorder
◆ Other VCR
◆ Camcorder
◆ Other VCR
Audio outputRearAudio RCAOut◆ Audio Hi-Fi system
★
(SV-L620K Only)
OUT TO TVRear75 ΩOut◆ Television
coaxial
rear of your VCR.
3Plug the coaxial cable supplied into the socket on your VCR.
4Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the SCART cable
(see section below) if your television is equipped with this type of
connection.
3
TV
Connecting Your VCR to the TV using the SCART Cable
TV
3
RF coaxial
cable
SCART Cable
You can connect your VCR to the television using the SCART cable if the appropriate input is available on
the television. You thus:
◆ Obtain better quality sound and pictures
TV
Aerial
AV2 (DEC./EXT.)
AV1 (EURO AV)
OUT/SORTIE
4
R/D
AUDIO
L/G
2
4
◆ Simplify the setting up procedure of your VCR
IN FROM ANT. Rear75 ΩIn◆ Aerial
coaxial◆ Cable television network
◆ Satellite receiver
☛ Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
.
☛◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
◆ Make sure that both the television and the VCR are switched off
before connecting the cables.
You can connect your VCR to a Hi-Fi system.
: You wish to take advantage of the quality of your Hi-Fi stereo system when watching a
Example
programme or recording via your VCR.
★
(SV-L620K only)
1Connect the coaxial cable as indicated in the above section.
2Connect one end of the SCART cable to the AV1(EURO AV) socket on the rear of the VCR.
3Plug the other end into the appropriate connector on the television.
4Plug the RCA Audio cable with stereo system into the Audio out socket on the rear of the VCR.
★
(SV-L620K only)
1110
TV
AV2 (DEC./EXT.)
AV1 (EURO AV)
R/D
L/G
AUDIO
OUT/SORTIE
TV
AV2 (DEC./EXT.)
AV1 (EURO AV)
R/D
L/G
AUDIO
OUT/SORTIE
Connecting a Decoder for scrambled PAY TV broadcasts
Aerial
TV
Aerial Connector
AV2 (DEC./EXT.)
OUT/SORTIE
2
AV1 (EURO AV)
R/DAUDIOL/G
TV
SCART Cable
This VCR is fully equipped to receive scrambled Pay TV broadcasts.
:CANAL+ or Premiere broadcasts.
Example
You can:
◆ Record a scrambled programme while watching another channel
◆ Record another channel while watching a scrambled programme
1Connect the VCR to the television as indicated on page 11.
2Plug the SCART cable with the decoder into the AV2 (DEC./EXT.) socket on the rear of the VCR.
3Plug the other end into the decoder.
DECODER
SCART Cable
3
Connecting Your VCR to the Satellite receiver or Other Equipment
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
VCR.
After making this connection, select the source by pressing the INPUT button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,
e.g. re-adjust to channel 33.
Satellite Receiver or other Equipment
Aerial Connector
2
TV
1. AV2 IN: By means of 21-pin Scart Cable
When the satellite receiver or other equipment is connected to the AV2 socket.
Plug the SCART Cable with satellite receiver or other equipment into the
VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
1
SCART Cable
Antenne
AV2 (DEC./EXT.)
socket on the rear of the
GBGB
Satellite Receiver or other Equipment
TV
SCART Cable
1
Aerial Connector
2
SCART Cable
1312
Antenne
VCR STANDBY/ON
S
S
Plug & Auto Set Up
TV
AV2 (DEC./EXT.)
AV1 (EURO AV)
R/D
L/G
AUDIO
OUT/SORTIE
Tuning Your Television for the VCR
AUTO SET UP
PLEASE WAIT
I
■■■■■■■■■■■■
60%
-------I
MENU
END:
TV
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
1Connect the coaxial cable as indicated on page 11.
(Connecting Your VCR to the TV Using the Coaxial Cable)
2Plug the VCR into the mains.
Result:The LANGUAGE SET menu is displayed.
3Select the required language by pressing the
4Press OK to store the language selected.
Result:A message appears.
2
5Press OK to start the auto scanning.
◆ The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
or❷
buttons.
6On completion, press MENU twice to exit the menu.
➢ Auto preset can be performed by pressing
the VCR continuously for 5 seconds or more with no
tape inserted.
(STOP) on
■
You must tune your television for the VCR only if you are not using
a Scart cable
➢ To view pictures from your VCR when a Scart cable is
used, the television must be set to the audio/video mode
(AV).
1Switch on the television.
2Switch on the VCR by pressing STANDBY/ON on the front of the
VCR or VCR STANDBY/ON (STANDBY/ON) on the remote
control.
3Select a programme position on the television to be reserved for
use with your VCR.
4Insert the video cassette in the VCR. Check that the VCR starts
reading the cassette; if not, press
.
❿
button
II
5Start a scan on your television or set the television to UHF
channel 36.
6Fine tune the television until the pictures and sound are obtained
clearly.
7If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the VCR output channel (see Setting the VCR Output Channel
on page 18 and Problems and Solutions on page 45).
★
(SV-L620K/SV-L80K)★(SV-L30K)
STANDBY/ON
2
REC MENU
OK
2
GBGB
4
8When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
:
That programme is now reserved for use with your VCR.
Result
CLOCK
➛❿
12:00 1/JAN/2003
❷
WED
END:MENU
1514
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.