Samsung SHR-5162, SHR-5082 User Manual

Real Time DVR

user manual

Thank you for purchasing a Samsung product. To receive a more complete service, please

www.samsung.com/global/register

imagine the possibilities

SHR-5082 SHR-5162

Code No. AB68-00644A-00

Real Time DVR user manual

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

SHR-5162_Eng.indb 44 2007-06-18 ｿﾀﾀ・11:46:52

key features of your DVR

The Digital Video Recorder (DVR) compresses the acquired images of 8/16 video channels from cameras using MPEG-4 technologies, and compresses the 4 channel audio inputs into ADPCM audio file in real time to record them on the hard disk or retrieve them from the hard disk simultaneously.

In addition, it transfers the video and audio data through a network in real time and allows you to remotely monitor them using your PC.



8/16 channel Composite Input connectors



NTSC/PAL video source compatible



With Dual Codec, can change the FPS (frames per second) accord

ing to the bandwidth and send live

pictures regardless of the recording condition



Picture quality improvement by adopting the De-interlace chip



Can display HDD information and status using the HDD SMART func

tion



Can convert the CIF (NTSC: 352*240, PAL: 352*288) images to 120

IPS images for NTSC or 100 IPS

images for PAL



8/16 channel loop through video connectors



Hard disk overwrite mode



USB 2.0 hard disk backup capability for large quantities of data



Backup function using USB 2.0 memory and external CD/DVD writer

(Built-in DVD-RW included)



Can record, play, and transmit audio/video data to Windows Netw

ork Viewer (Smart Viewer) simultaneously



Can record or play 8/16 channel video data



Various search modes (time/date, event, schedule)



Various recording modes (time lapse, event, schedule)



Extended hard disk connection (USB 2.0)



Alarm interface function (Input: 8/16, Output: 4, Reset: 1)



Remote monitoring function using Windows Network Viewer (Smart

Viewer)

WHAT’S INCLUDED WITH YOUR DVR

Upon delivery of this product, you shall unwrap and put it on the even floor or where you want to use it. Then you must check if the following items are in it.

Remote control unit (RCU)

One power cord Smart Viewer

software CD (PDF manual included)

Two brackets

Brackets are used to attach the product to the rack

Special 4 screws 2 EA of RS-485/

Alarm terminal block

User manual2 EA of AAA batteries

SHR-5162_Eng.indb 2 2007-06-18 ｿﾀﾀ・11:46:56

safety regulations

Please be sure to keep the following in mind for the right use of the product to prevent proprietary risk or damage.



Do not use multiple plugs at once.

This may cause abnormal heat generation or fire



Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.

This may cause fire.



Do not bend the power cord forcibly nor put a heavy material on it.

This may cause fire.



Do not touch the power plug with wet hands.

This may cause electric shock.



Insert the power plug firmly enough not to shake.

This imperfect connection may cause fire.



Keep the product off humidity, dust, or soot.

This may cause fire or electric shock.



Do not put metals (coin, hair pin, metal piece, etc.) or inflammable materials (match, paper, etc.) in the ventilation hole.

This may cause fire.



Keep the surrounding temperature between 0°C to 40°C and keep the product off humidity.

This may cause breakdown.



Secure sufficient ventilation.

This may cause abnormal operation due to high temperature.



Keep the product off direct ray of light or heat from the heating device.

This may cause fire.



Do not disassemble, repair, or remodel the product.

This may cause fire, electric shock, or injury due to abnormal operation.



Do not pull out the power cord.

This may destroy the power cord, eventually, cause fire or electric shock.



Plug out in the event of thunder or lightning.

This may cause fire.



Keep your children off the battery after you take it out of the product. They tend to swallow it unconsciously.

If your children swallow it, please see the doctor immediately.



Install the product at a safe place or attach the product to the wall or ceiling with a stand firmly enough not to fall to the ground.

This may injure people.

SHR-5162_Eng.indb 3 2007-06-18 ｿﾀﾀ・11:46:59

before start

This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like.

You have to keep in mind the following notices:



SEC retains the copyright on this manual.



This manual cannot be copied without SEC’s prior written approv

al.



We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.



If you want to open the case of your system for checking problems, please consult the expert from the shop where you bought the product.



You may download open source codes from the following website: http://www.samsung.com.



Before installing any external device such as external memory or HDD, please check the compatibility of the device with Samsung DVR. The list of the compatible devices with Samsung DVR can be obtained from your vendor.



Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.



The Mains plug is used as a disconnect device and shall stay readily operable at any time.

WARNING

Battery

Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type of battery as the one being used in the product. The following are the specifications of the battery you are using now.



Normal voltage: 3V



Normal capacity: 170mAh



Continuous standard load: 0.2mA



Operating temperature:

-20 to +85°C (-4 to +185°F)

System Shutdown

Turning off the power while the product is in operation, or taking not permitted actions may cause damage to the hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product. Please turn off the power using the Power button on the front of your DVR. After selecting OK in the pop-up menu, you can pull off the power cord. You may want to install a UPS system for safe operation in order to

prevent damage caused by an

unexpected power stoppage. (Any questions concerning UPS, consult your USP retailer.)

Operating Temperature

The guaranteed operating temperature range of this product is 0°C to 40°C (32°F to 104 °F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. When using the device after a long period of storage at low temperature, place the product at room temperature for a while and run it. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C to 55°C (41°F to 131 °F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

STANDARDS APPROVALS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency ene

rgy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

“Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

SHR-5162_Eng.indb 4 2007-06-18 ｿﾀﾀ・11:47:00

contents _01

INTRODUCING YOUR REAL

TIME DVR

INSTALLATION

CONNECTING WITH OTHER

DEVICES

LIVE

MENU SETUP

BACKUP

PTZ CAMERA CONTROL

RECORDING

03 Controls on the DVR 05 Rear panel jacks 06 Remote control

08 Checking installation envir

onment

08 Hdd addition

12 Connecting video, audio, and monitor 12 Connecting the network 13 Connecting the USB 13 Connecting the alarm input/output 14 Connecting the RS-485 device

15 Operating the system 15 Live scr

een mode

17 Setting audio on/off 18 Freezing and zooming 18 Event monitoring 19 Spot-out monitoring

20 Befor

e use

20 System 25 Camera 26 Monitoring 27 Record mode 29 Event record mode 30 Schedule 31 Network 34 Configuring network

35 Backup

36 PTZ camera control mode 36 Basic PTZ operations 37 Pr

eset setup

37 Camera menu setup 38 Preset view 38 Other view

39 Rec (normal r

ecording)

39 Record schedule

contents

continued next page

SHR-5162_Eng.indb 1 2007-06-18 ｿﾀﾀ・11:47:00

02_ contents

SEARCH AND PLAY

Smart Viewer

APPENDIX

40 Before use 40 Calendar search 40 Event search 41 Date time search 41 Go to first search 42 Go to last search 42 Backup search 42 Playback

44 Intr

oduction

44 Main features 44 PC specification (recommended) 44 Smart Viewer installation 45 Smart Viewer program execution 46 Smart Viewer initial screen 46 Setup mode 57 Monitoring mode 64 Search mode

68 Pr

oduct specification

71 Outline drawings 73 Factory default 76 Troubleshooting (FAQ) 79 Open source license report on the product

SHR-5162_Eng.indb 2 2007-06-18 ｿﾀﾀ・11:47:00

01 INTRODUCING

introducing _03

CONTROLS ON THE DVR

introducing your real time DVR

1. ALARM LED

Lights when an event occurs.

HDD LED

Lights when the hard disk is operating. When the HDD is accessed, LED repeatedly blinks.

NETWORK LED

Lights when the data is transferred through the network.

BACKUP LED

Lights when a backup is in progress.

REC LED

Lights when a recording is in progress.

2. PTZ Button

Toggles PTZ mode On and Off.

ZOOM(TELE)

Button

Implements the digital zoom (x2). Performs the TELE function in PTZ mode.

FREEZE(WIDE)

Button

Performs the FREEZE function in live mode. Performs the WIDE function in PTZ mode.

SEARCH(VIEW)

Button

Goes to the Search function window. Performs the Preset View function in PTZ mode.

MENU(PRESET)

Button

Goes to the system menu screen or moves to the upper menu. Performs the Preset Setup function in PTZ mode.

9 8 7

32 4

9 8 7

32 4

5162

5082

SHR-5162_Eng.indb 3 2007-06-18 ｿﾀﾀ・11:47:02

04_ introducing

3. REC Button

Starts or ends the recording

(Fast/Step Rewind)

Button

- Step Rewind: Used for backward scene-by-scene search while at pause.

- Fast Rewind: Used for quick backward search while in play. (-x2, -x4, -x8, -x16, -x32, -x64)

(STOP)

Button

Ends search while in play.

(PLAY/PAUSE)

Button

Pauses and resumes the screen play.

(Fast/Step Forward)

Button

- Fast Forward: Used for quick forward search while in play. (x2, x4, x8, x16, x32, x64)

- Step Forward: Used for forward scene-by-scene search while at pause.

4. Direction Buttons

Used for changing settings or for moving the cursor up/down/left/right.

5. MODE Button

When pressed in live mode, it sequentially display 16-split, 9-split, 4-split, 6-split, 7-split, 8-split, Picture in Picture (PIP), and single sequence.

When pressed in playback mode for playback-exclusive channels (16, 9, 4), it sequentially displays single channel, 1 playback channel with 1 live channel, 1 playback channel with 8 live channels, 1 playback channel with 12 live channels, and 1 playback channel with 15 live channels.

AUDIO Button Toggles Audio On and Off. ALARM Button Turns off the alarm LED and stops the sound when an alarm is issued. Alarm icon disappears when the alarm button is used. BACKUP Button Press it for backup operation.

6. USB Port

Use it to connect USB type devices.

7. Channel Button

Select a single channel (1 to 16) while in live mode.

8. Eject Button

Opens the DVD-RW tray.

9. Power LED

Displays power On/Off state. Power Button Press to turn on the power or shut down your DVR in live mode.

CAUTION

Do not install DVR on the carpet or other soft material to prevent clogging of the air ventilator. To install DVR on the cabinet or rack, be sure to check the ventilation condition.

SHR-5162_Eng.indb 4 2007-06-18 ｿﾀﾀ・11:47:03

01 INTRODUCING

introducing _05

REAR PANEL JACKS

5082 REAR

5162 REAR

VIDEO OUT Composite video output port (BNC type connector)

AUDIO OUT Audio output port (RCA jack)

VGA

VGA video output port

S-VIDEO S-VIDEO video output port

NETWORK Network connection port

AUDIO IN Audio input port (RCA jack)

SPOT

SPOT1: 1 channel exclusive SPOT output SPOT2: The same output as the Main VIDEO OUT (OSG is not displa

yed)

USB USB connection port

ALARM

- ALARM 1–16: Alarm input port

- ALARM RESET IN: Alarm reset port

- ALARM OUT 1–4: Alarm output port

- TX+, TX-, RX+, RX-: RS-485 communication

THROUGH

You may use THROUGH port to transmit a video signal to the other video equipment.

VIDEO IN Composite video input port (BNC type connector)

AC-IN

AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC)

SHR-5162_Eng.indb 5 2007-06-18 ｿﾀﾀ・11:47:07

06_ introducing

REMOTE CONTROL

RECORD

Starts or ends the

recording.

OPEN/CLOSE

Used to open and close

the DVD-RW tray.

0~9

Selects a single channel

while in live mode. Used

for inputting numeric

values.

REC LOCK

Locks the record function.

AUDIO

Toggles Audio On and

Off.

BACKUP

Press it for backup

operation.

ALARM

Cancels sending alarms.

MODE

Select a split screen.

FR (fast rewind)

FR (fast reverse): Used for

quick backward search

while in play. (-x2, -x4,

-x8, -x16, -x32, -x64)

STOP

FF (fast forward)

Used for quick forward

search while in play. (x2,

x4, x8, x16, x32, x64)

Play/Pause

Using the NUMERIC Buttons

CHANNEL 1–9 Press the 1 to 9 button respectively.

CHANNEL 10

Press the 0(10+) button, release, and press the 0 button again with

in 3 seconds.Or press the 0(10+) button,

release, and wait 3 seconds.

CHANNEL 11–16 Press the 0(10+) button, release, and press the 1 (or 2, 3, 4, 5, 6) button

again within 3 seconds.

SHR-5162_Eng.indb 6 2007-06-18 ｿﾀﾀ・11:47:08

01 INTRODUCING

introducing _07

STOP

Ends playing.

Play/Pause

Pauses or resumes

playing.

Goes to the system menu

screen or moves to the

upper menu.

ZOOM

Implements the digital

zoom (x2).

Goes to the search select

screen.

FREEZE

Performs the FREEZE

function in live mode.



DOWN



LEFT



RIGHT



Used for changing

settings or for moving the

cursor up/down/left/right.

ENTER

Shows the cursor for

channel selection in live

mode or used as the

selection button for menu

configuration.

PTZ

Toggles PTZ mode On

and Off.

TELE

Performs the TELE

function in PTZ mode.

WIDE

Performs the WIDE

function in PTZ mode.

SYS ID

Use for inputting or

confirming system or

remote control ID.

PRESET

Performs the PRESET

function in PTZ mode.

VIEW

Performs the VIEW

function in PTZ mode.

Changing the Remote Control ID

As you press the SYS ID button, input the desired 2-digit ID in order (Remote control default ID: 00).

For instance, to change the remote control ID to 08, press the SYS ID button, and then input 0 and 8 buttons in order.

After the input completes, press the SYS ID button again in order to confirm the setting.

SHR-5162_Eng.indb 7 2007-06-18 ｿﾀﾀ・11:47:09

Figure 1

One Year: 24HR X 365 DAY =8,760 HR

Temperature Unit: ºC

Life (Unit: HOURS)

Figure 2

08_ installation

installation

You should pay attention to the following before you use the product.



Do not use it outdoor.



Do not place water or liquid near the connection part or the prod

uct.



Do not impose excessive shock or force.



Do not pull out the power cord unreasonably.



Do not disassemble the product on your own.



Do not exceed the rated input or output voltage range.



Use the certified power cord only.



For the product with an input ground, use a power plug with a g

round pin.

CHECKING INSTALLATION ENVIRONMENT

Samsung Digital Video Recorder (hereinafter referred to “DVR”) is a high-tech security equipment that contains a high-capacity HDD and top-notch circuits. High temperature inside or outside of the product may reduce the product life, deteriorate performance (see the graph below; it explains the correlation between temperature and product life), and lead to a malfunction.

Please keep the following instructions for rackmounting the Samsung DVRs to proceed with the installation.

1. The rack on which the DVR is mounted

should not be sealed off.

2. And it also can allow air circulation through

the vent.

3. As shown in the Figure 2, we recommend

you to heap the product with other DVRs or use rack-mount devices at a certain space, or install a vent system to accommodate airflow.

4. For forming a natural convection, the air

intake hole should be positioned at the bottom and the emission at the top.

5. We recommend you to install each of the air

ntake and emission holes with fan motors for sufficient airflow. (The air intake fan should be equipped with a filter to prevent possible inflow of dust and other impurities.

As shown in the Figure 1, the temperature inside the rack and around the DVR should maintain between 0 and 40°C (32 and 104°F).

HDD ADDITION

The user can add up to two hard disks to this product. However, there are many factors that can cause electric shock, accidents, and malfunctioning of the device inside of the product. When the user does not correctly install or apply the proper settings, the device may not recognize the hard disks or the device will not properly run. Therefore, before adding any hard disks, it is recommended that you consult the specialist from the site where you purchased the product.

SHR-5162_Eng.indb 8 2007-06-18 ｿﾀﾀ・11:47:44

02 INSTALLATION

installation _09

CAUTION

[Checking HDD Data] Please, pay attention to Following information to minimize the chance of losing HDD data.



Remember that you should protect HDD from any impact or misuse as this may cause damaged.



The Manufacturer is not responsible for missing data or defects caused by the user’s mishandling.

Note:

Adding Extra HDD. Check in advance that the HDD is compatible with the manufacturer’s DVR.

Examples that can cause loss of data or damage HDD.



Any outside Impact on the case which could happen whilst disassembling or setting up the DVR.



Power cut or incorrect shutdown whilst the DVR is operating.



Moving or causing any impact on the DVR during operation. Please, back up events as soon as possible to minimize disappointment should HDD data be lost.

Things to consider when adding a hard disk



When adding a hard disk, pay attention so that the cable doesn’t get caught between unsuitable places or the cable’s insulation is not damaged. (This may cause a malfunction or fire.)



When adding a hard disk, be careful not to have any injury by the pointed edges inside the product.



Pay attention not to lose screws or accessories.

If the screws or accessories are not put together, the product may malfunction or not properly operate.



If you contact the RTC battery while adding hard disks, the battery failure may happen. In this case, you will encounter failures when setting the time and operating DVR.



If you don’t connect fan power cables after adding hard disks, the fan failure message appears on the screen. This can cause operation failures because it raises the temperature inside your DVR.



Check the compatibility list of HDDs before installing additional HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor.

Setting the jumper

The jumper setting method is illustrated on the surface of the purchased HDD.

Using SAMSUNG hard disk, the jumper setting method is as follows:



HDD jumper for Primary Master and Primary Slave.



Jumper setting for Secondary Master (DVD-RW) and Secondary Slave.

How to add hard disks

Before starting this work, remove the power cord from the outlet.

1. Take out the screws on the left and right

sides (5 spots for each side) and on the rear (1 spot).

2. Remove the cover from the product. (Slide

he cover slightly backward, lift it upward and

remove it.)

SHR-5162_Eng.indb 9 2007-06-18 ｿﾀﾀ・11:47:46

BRACKETHDD(A)

BRACKETHDD(B)

BRACKET-HDD(A)

SCREW-SPECIAL

Screwdriver

10_ installation

3. There are brackets (Bracket-HDD) mounted

on the right and left sides where you can mount HDDs. Remove the screws holding each bracket to mount an HDD onto.

4. If you want to add a hard disk, remove

Bracket-HDD(A), power supply cable, signal transmission cable (IDE Cable), and fan cable.

5. To add a hard disk, the built-in HDD (Primary

Master) should have been installed. Basically a built-in HDD has been installed as the Primary Master and a DVD-RW driver as the Secondary Master. Before adding a hard disk, set the jumper for master and slave. The jumper setting method is illustrated on the surface of the purchased hard disk. Fix the hard disk to the Bracket using the (A)SCREW-SPECIAL (BWH, 6-32UNC, L10.

5). Align the 5 spots on the bottom and mounting holes of the Bracket, insert the HDD, and then fix it using the screws.

SHR-5162_Eng.indb 10 2007-06-18 ｿﾀﾀ・11:47:50

BRACKET-HDD(B)

Secondary HDD IDE Connector

Primary HDD IDE Connector

02 INSTALLATION

installation _11

6. To add another hard disk after adding a hard

disk completes, remove the Bracket-HDD(B) on the DVD-RW driver.

7. Fix the hard disk to the Bracket using 4

(B)SCREW-MACHINE (6-32UNC, L4. 2) provided when purchasing the HDD. The screws should be fastened not to come loose. Fix the Bracket-HDD(B) using screws after aligning 4 spots on the bottom and mounting holes.

8. When adding hard disks completes, connect

the power supply cable, signal transmission cable (IDE Cable), and fan cable to the hard disks.

9. After checking whether or not the

connections have no problem, close the cover.

10. Fix the cover using screws. (Each of left and

right sides has 5 spots and the back side has 1 spot.)

SHR-5162_Eng.indb 11 2007-06-18 ｿﾀﾀ・11:47:52

CONNECTING THE NETWORK

Connecting to Internet through Ethernet (10/100BaseT)

12_ connecting

connecting with other devices

The illustrations are described based on SHR-5162.

CONNECTING VIDEO, AUDIO, AND MONITOR

SHR-5162_Eng.indb 12 2007-06-18 ｿﾀﾀ・11:47:55

03 CONNECTING

connecting _13

Connecting to Internet through ADSL

CONNECTING THE USB

1. There are two USB connecting ports on the

front and rear panels of the product.

2. USB Hard Disk, USB CD/DVD, and USB

Memory can be connected through any of those ports.

3. If the USB HDD is connected to the system,

it should be detected and set through Menu > System > Storage Setup before operation.

4. The product provides the HOT PLUG feature

that allows the connection/removal of USB devices during system operation.

CAUTION



The USB type of hard disk should be set to Master.



If the backup USB device cannot be formatted in the DVR, format it as FAT32 using your PC.

For more details, refer to the System section in Chapter 5 Menu Setup.

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm IN/OUT ports on the rear of the product have the following elements:



ALARM IN 1 to 16: Alarm input ports



ALARM RESET: When receiving an ALARM RESET signal, the system clears the current ALARM input or output signal and resumes alarm sensing.



ALARM OUT 1 to 4: Alarm output ports



5162 Alarm IN/OUT Ports



5082 Alarm IN/OUT Ports

SHR-5162_Eng.indb 13 2007-06-18 ｿﾀﾀ・11:47:58

14_ connecting

CONNECTING THE RS-485 DEVICE

You can connect an RS-485 device through a rear port of the product. For example, you can c

onnect and control PTZ cameras supporting the RS-485 communication. You can also adopt either Half Duplex or Full Duplex method for exchanging data.

Supportable baud rates are 600, 1200, 2400, 4800, 9600, 19200, and 38400.

CAUTION



Check if the RS-485 device is compatible with the product first.



Then pay attention not to change the polarity (+/-) of RS-485 when connecting it.

PTZ device

Half Duplex Type

Data (–)

Data (+)

Full Duplex Type

Rx(+)

Rx(–)

Tx(–)

Tx(+)

Rear

Tx(–)

Tx(+)

Rx(–)

Rx(+)

SHR-5162_Eng.indb 14 2007-06-18 ｿﾀﾀ・11:48:00

CAM_01

V.Loss

04 LIVE

live _15

live

OPERATING THE SYSTEM

Turn on the power and the following Samsung logo appears.

Upon completion of initializing procedure, the live screen appears with a beep sound. (It takes about one minute until a live screen comes up.)



If a new HDD is installed, the initialization may take much more time because it includes a new HDD initialization.



If the live screen does not appear or the LEDs on the front panel repeat f

lickering, please check the connections. If the system does not operate normally, contact the expert from the shop where you bought the product.

The live screen does not affect the earlier MENU settings. If you reboot the system when a recording is in progress, the recording will start again.

LIVE SCREEN MODE

Live screen icons

The live screen icons display the status of current setup or function.

: Recording icon

Each icon represents Normal/Event (Alarm+Motion)/Schedule Recording.

: Recording Video Size icon

Each icon represents the recording size of Normal or CIF.



Normal: Half D1—(NTSC) 720x240, (PAL) 720x288



CIF: CIF— (NTSC) 352x240, (PAL) 352x288



Half D1 is an MPEG-4 video encoding mode in which half the horizontal resolution is sampled.

: Record Lock icon

It indicates that the record lock is activated. This icon appears when you are recording video i

mages while the record lock is set. To cancel the

recording, enter the preset password.

SHR-5162_Eng.indb 15 2007-06-18 ｿﾀﾀ・11:48:02

16_ live

: PTZ icon

This icon appears when setting the PTZ device and it changes to yellow when operating the PTZ.

: Audio icon

This icon represents the ON/OFF status of audio and it changes to yellow when the audio is set to ON. It does not appear in Video mode or when the audio is disabled.

: Sensor Active icon

This icon appears in the channel linked with the external sensor signal when the sensor is active.

: Motion Event icon

This icon appears in the Motion Event channel when the motion detection is set to ON.

: Zoom icon

This icon appears while the Zoom operation is active and disappears by canceling the operation.

: Freeze icon

This icon appears in Freeze mode and disappears by canceling the freeze operation.

: Recording Hard Disk Full icon

This icon appears when the hard disk space is not sufficient when recording.

: Auto Sequence icon

This icon appears in Auto Sequence mode.

: Backup Play icon

This icon appears when the backup data is now played.

: Fan Error icon

This icon appears when the fan does not work properly.

: No HDD icon

This icon appears when there is a dysfunctional hard disk.

When the Fan Error icon or No HDD icon appears, please contact the service center.

V.Loss/V.Off: Video input status When there is no video data input while the video is active, V.Loss appears in the channel. When you set the Video On/Off to OFF, V.Off appears.

Live screen modes

The SHR-5162 model receives 16 live images and displays them in the following 9 modes as shown in the picture. To see each mode in order, repeatedly press the MODE button on the front panel or remote control. But the SHR-5082 model has no 16-split mode.

CAM_01

CAM_01 CAM_01

CAM_05 CAM_06 CAM_07 CAM_08

CAM_02

CAM_03

CAM_04

CAM_01

CAM_03

CAM_02

CAM_04 CAM_05

CAM_06 CAM_07

CAM_02

CAM_03

CAM_02

CAM_03 CAM_04

CAM_02 CAM_03

CAM_04 CAM_05 CAM_06

CAM_07 CAM_08 CAM_09

CAM_01 CAM_02 CAM_03 CAM_04

CAM_05 CAM_06 CAM_07 CAM_08

CAM_09 CAM_10 CAM_11 CAM_12

CAM_13 CAM_14 CAM_15 CAM_16

8 Split Mode PIP Mode Single Mode

Auto Sequence Mode

16 Split Mode

9 Split Mode 6 Split Mode4 Split Mode 7 Split Mode

CAM_01

CAM_03

CAM_02

CAM_04 CAM_05

CAM_06 CAM_07

CAM_02

CAM_03

CAM_02

CAM_03 CAM_04

CAM_02 CAM_03

CAM_04 CAM_05 CAM_06

CAM_07 CAM_08 CAM_09

CAM_01 CAM_02 CAM_03 CAM_04

CAM_05 CAM_06 CAM_07 CAM_08

CAM_09 CAM_10 CAM_11 CAM_12

CAM_13 CAM_14 CAM_15 CAM_16

SHR-5162_Eng.indb 16 2007-06-18 ｿﾀﾀ・11:48:03

04 LIVE

live _17



Full Screen (Single) mode: Displays the selected channel in full screen.



4, 6, 7, 8, and 9 Split mode: Displays 4, 6, 7, 8, 9 channels in each split screen. You can select channel numbers on your own using the MODE button on the front panel or remote control. In 4-channel and 9-channel split modes, the screen page is changed using the Direction buttons.



16 Split mode: Displays 16 live channels on a 16-split screen. The Auto Sequence is not available.



PIP (Picture in picture) mode: Displays a small screen on a full screen. You can change the channel number on a full screen or small screen by pressing the ENTER button and inputting the NUMERIC button. To switch between main and sub screens, press the ENTER button and press the LEFT or RIGHT direction button. You can move the sub screen to 5 different stages using the UP/DOWN direction buttons.



Auto Sequence mode: Sequentially displays all the channels at an interval of auto sequence time. The auto sequence time is set in Camera Configuration on the menu.

Selecting live screen mode

Available modes are switched using the MODE button and the NUMERIC buttons on the front panel or remote control. The following figure is the live modes transition diagram in the SHR-5162 model.



The initial live screen shows the 16-split screen mode at first. The SHR-5082 model starts from the 9-split mode.



In the 9-split screen mode, the first screen shows 9 channels (CH 1 to CH 9) and the second screen shows the rest 7 channels (CH 10 to CH 16) after pressing the RIGHT direction button. If you press the RIGHT direction button again, it changes to the Auto Sequence mode.



Likewise, in the 4-split screen mode, the first screen shows 4 channels (CH 1 to CH 4), the second screen shows CH 5 to CH 8, the third screen shows CH 9 to CH 12, the fourth screen shows CH 13 to CH 16. If you press the RIGHT direction button again, it changes to the Auto Sequence mode.



Every time you press the MODE button, the modes change in the following sequence: 16-split mode



9-split mode



4-split mode



6-split mode



7-split mode  8-split

mode



PIP mode  Auto Sequence mode 

16-split mode.



Press the CH 1 to CH 16 button to see a full screen of each channel after pressing the ENTER button.



Press the MODE button after entering a full screen channel in a split screen mode to return to the previous split mode screen.

SETTING AUDIO ON/OFF

In other split modes except full screen mode, 16-split mode, and auto sequence mode, you can choose a channel to be displayed by pressing the ENTER and NUMERIC buttons. If you set the selected channel to Audio On, you can turn the Audio On and Off in live mode.

Audio On/Off setting in full screen mode

In full screen mode, the audio of the selected channel automatically turns on. You can turn the audio On and Off by toggling the AUDIO button. D

epending on the audio On/Off setting condition,

the Audio icon of the channel changes to yellow and white.

Audio On/Off setting in 16-split mode

When pressing the ENTER button in the 16-split mode, the selection cursor appears for you to select a channel. When you select a channel and press the AUDIO button on the front panel or remote control, the audio of the selected channel is changed to On or Off. D

epending on the audio On/Off setting condition,

the Audio icon of the selected channel changes to yellow and white. You can have audio settings on channel 1 to 4 in 16-split mode.

SHR-5162_Eng.indb 17 2007-06-18 ｿﾀﾀ・11:48:04

18_ live

Audio On/Off setting in 4, 6, 7, 8, and 9-split modes and PIP mode

As in 16-split mode, when pressing the ENTER button in 4, 6, 7, 8, and 9-split modes and PIP mode, the selection cursor appears for you to select a channel. After selecting a channel, you can set the Audio to On or Off using the AUDIO button. According to the audio On/Off setting condition, the Audio icon of the selected channel changes to yellow and white.

FREEZING AND ZOOMING

Freeze function

The freeze function pauses the video image on the live screen and it is only available in the live mode. You can set this function to On or Off using the FREEZE button on the front panel or remote control.

Zoom function

The zoom function enlarges the selected area to double size, and it is only available in the single screen mode. When you press the ZOOM button on the front panel or remote control, the zooming area appears. Use the UP/DOWN/LEFT/RIGHT direction buttons to adjust the position for zooming. After selecting the Zoom area, press the ENTER button to enlarge the selected area in double size. To cancel the zooming function, press the ZOOM button again.

EVENT MONITORING

The event monitoring is used to display the channel that is synchronized with an event on the screen when a special event (Sensor/Motion/ Video Loss) occurs. The settings for event monitoring activation and event duration setup are done in the Monitoring on the menu. If you set the event monitoring interval to 5 seconds and an event occurs at CH 2 as shown in the picture, the system will display CH 2 in full screen for 5 seconds. If another event occurs within 5 seconds, it is also displayed together with the existing event. As shown in the picture, if we assume that both CH 1 and CH 3 events occur within 5 seconds (for example, after 4 seconds), after CH 2 event, these three events are displayed with split into 4 screens. If a new event does not occur during the event duration, the system will return to the previous live mode. Pressing the ALARM button during the event duration makes the event monitoring stop. When an event occurs, the ALARM LED is turned on. Press the ALARM button again to turn ALARM LED Off. At this time, the alarm s

etup is initialized, the event icon disappears, and the event monitoring is cancelled while in event monitoring. After alarming, the event recording resumes.

[ Event-driven screen changes in Event Monitoring ]

SHR-5162_Eng.indb 18 2007-06-18 ｿﾀﾀ・11:48:05

04 LIVE

live _19

SPOT-OUT MONITORING

Spot-out monitoring has nothing to do with the live screen output. It monitors a specific channel in full screen. After selecting Monitoring on the MENU, you can select a channel for monitoring in Spot Out Channel. You can also monitor all the channels at an interval of auto sequence time. In case of spot-out monitoring, the live screen icons do not appear. If the Spot Out Event Monitor is set to On, you can see the event channels. When the events occur sequentially, the channel o

f the camera that the last event has been issued is displayed. (In case of alarms, multiple channels are enabled.) When multiple cameras are connected, the camera with the smallest number is output on Spot-out channel.

In the live screen, you can select a spotout channel as described below:



Press the STOP button on the front panel or remote control and press a button out of 16 channels. The selected channel is set to a spot-out channel.



When you press the STOP button and then the MODE button within 2 seconds, the spot-out channel mode is changed to the change screen mode.

CAUTION



If the built-in HDD is not connected or it is out of order, the system

displays an error (

) saying “built-

in HDD error” at the top-left corner. In this case, you cannot perform recording, playback, and backup. So please contact the service personnel.



If the fans in the product do not properly operate or have some problem, the fan error message appears on the live screen as shown in the following picture. In this case, check whether the fans normally run or not. When the fans are recovered,

the Failure icon (

) that is displayed

at the top-

left corner disappears. In case of a fan failure, it can shorten the life of the product so please contact the service personnel.

A error occurs in the fan. Refer to the manual.

Fan Information

SHR-5162_Eng.indb 19 2007-06-18 ｿﾀﾀ・11:48:06

MENU SETUP

System

Camera

Monitoring

Record Mode

Event Record

Schedule

Backup

Network

Date/Time/Language Password Load Factory Default System Log Event Log System Information and Setup Storage Setup Export/Import the Configuration Remote Control Device

Move/Control Select Exit

Enter ID and Password

OK Cancel

Password

Admin

Admin Password

OK Cancel

Date Time Time Zone Time Synchronization Date Format Time Format Language DST Off

OK Cancel

Date/Time/Language Setup

2007-01-15

22:13:38 (GMT+08:00) Setup YYYY-MM-DD 24 Hours English Mar-last-Sun 01H ~ Oct-last-Sun 01H

20_ menu setup

menu setup

BEFORE USE



The menu structure is as follows:



Selection The yellow cursor is the selection bar. Use the Direction buttons on the front panel or remote control to move the cursor to a desired menu. If you press the ENTER button when the cursor is located in a desired menu, the screen displays the sub window. To select an item from the menu, press the ENTER button. On a drop-down menu, use the UP/DOWN direction buttons to move the cursor on your desired item.



OK and Cancel in each Setup window Once any changes are made in a setup window, they can be applied by selecting OK. When Cancel is selected, the changed settings are not applied and it returns to the upper menu.



MENU button When the MENU button is pressed in any of the Setup menus, it changes to the upper menu. If you press the MENU button in Live mode, the password window appears for user validation.



SEARCH, COPY, PTZ, POWER buttons in Live mode To perform the search, backup, PTZ controls, or shutdown function, press the following button in Live mode. Then the window asking for an ID and password appears for user validation.



The direction sign (► or ▼) right next to the title of menu or item leads you to press the displayed button on the front panel or remote control to go for sub item.

SYSTEM

Date/Time/Language Setup



Date

Press the ENTER button and use the LEFT or RIGHT direction button to move to year, month, and day. To change the value, use the UP or DOWN button. Press the ENTER button to confirm the setting.



Time

Press the ENTER button and use the LEFT or RIGHT direction button to move to hour, minute, and second. To change the value, use the UP or DOWN button. Press the ENTER button to confirm the setting.

SHR-5162_Eng.indb 20 2007-06-18 ｿﾀﾀ・11:48:08

Admin Password New Password



Confirm



Password Lock On Record Lock On User Password User Setup User1 New Password



Confirm



User Authority Setup Search Backup PTZ Shutdown

OK Cancel

Password

All Key Lock On

Automatic Time Synchronization On Time Server(IP) 203.248.240.103 Activate by Server(Master) On Last Synchronization Time

2007-01-26 12:39:12 Fail

OK Cancel

Time Synchronization Setup

05 MENU SETUP

menu setup _21

CAUTION

[Date/Time Change] After the date and time has been changed, the data recorded before the change can be removed. For example, if the current time is changed from 8 to 7, all the data recorded between 7 and 8 will be deleted.



ime Zone

t the local time zone based on the Greenwich

Mean Time (GMT).



Time Synchronization

The time of your DVR can be synchronized by a specified server. For this purpose, enter the IP address of the time server and determine the initiator of this activity.

- Automatic Time Synchronization

Synchronizes while gathering time information from the Time Server (IP)

- Activate by Server(Master) Time Synchronization is executed while more than two DVR devices are connected, and the operating DVR device connected to the server is set as standard.



Date Format

The system supports 3 types of formats: YYYY-MM-DD, DD-MM-YYYY, and MM-DDYYYY.



Time Format

he system supports 2 type of formats: 24 Hours

and 12 Hours(AM/PM).



Language

After selecting a language, on-screen display (OSD) menus are displayed in the selected language.



DST (Daylight Saving Time)

DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the DST is set to Off, it does not apply. To set the DST, enter the start time and end time on the right. It allows you to set month, week (e.g. 1st, 2nd,

3rd, 4th, last), date, and time only.

Password

The factory default password for Admin and user privileges is “4321.” The Menu Setup window cannot be accessed by user privileges but by the Admin privilege. The Admin user can give users (User1 to User5) access rights to the selected functions. If you press Setup in User Authority, all the access rights are selected.



New Password

You can change the password by entering a new password value in this field. The input password is allowed up to 8 digits. Press the ENTER button and enter numbers using the NUMERIC buttons on the front panel or remote control. Press the ENTER button again for confirmation. Then the cursor moves to the New Password Confirm field.



Confirm

It confirms that the newly input password is correct. Enter the new password again in the field.



Password Lock

If it is set to On, a pop-up window for asking the password appears every time you select a menu. If it is set to Off, you can enter menus without entering the password.



Record Lock

If the Record Lock is set to On, a pop-up window, asking for the password appears while disabling the recording.



User Authority

You can select any of Search, Backup, PTZ, and Shutdown. If the user has no access right for Search, the user cannot enter the Search menu.



All Key Lock On

If you select this, the system will enter the live mode immediately. If you press any button on t

he front panel or remote control, the password input window appears. If the correct password is input, the lock function is deactivated.

[All Key Lock On] If you select this, the system immediately switches to the live mode and all buttons are locked.

If the user enters the selected function, he or she has to input the password first.

SHR-5162_Eng.indb 21 2007-06-18 ｿﾀﾀ・11:48:09

First Prev Next Last Exit

No. Event Log List Date/Time

339 Video Loss CH[4] 2007-03-10 10:00:29 338 Video Loss CH[6] 2007-03-10 10:00:29 337 Video Loss CH[7] 2007-03-10 10:00:29 336 Alarm Detection CH[3] 2007-03-10 10:00:29 335 Motion Detection CH[1] 2007-03-10 10:00:29 334 Alarm Detection CH[2] 2007-03-10 10:00:09 333 Video Loss CH[4] 2007-03-10 09:59:38 332 Video Loss CH[5] 2007-03-10 09:59:30

Event Log

MENU SETUP

System

Camera

Monitoring

Record Mode

Event Record

Schedule

Backup

Network

Date/Time/Language Password Load Factory Default System Log Event Log System Information and Setup Storage Setup HDD Mode Setup Remote Control Device

Move/Control Select Exit

Cancel

Sure to default Setting?

First Prev Next Last Exit

No. System Log List Date/Time

339 Setup Start (Local) 2007-03-10 10:00:29 338 Setup End (Local) 2007-03-10 10:00:29 337 Setup Start (Local) 2007-03-10 10:00:29 336 Setup End (Local) 2007-03-10 10:00:29 335 Time Change 2007-03-10 10:00:29 334 Play Back Start 2007-03-10 10:00:09 333 Power Failure Recorery 2007-03-10 09:59:38 332 System Start 2007-03-10 09:59:30

System Log

22_ menu setup

Load Factory Default

It is used to initialize all the settings to the factory default values. The recorded video data will not be removed. Select OK to start initialization.

System Log

The System Log is used to check the important history records by an administrator. The log data includes the system-related logs such as system start, system termination, menu setup change, and the like.

Available action buttons are:



First: Moves to the first log page.



Prev: Moves to the previous log page.



Next: Moves to the next log page.



Last: Moves to the recent log page.

The system logs are as follows:

System Start Starts the system.

Logout(Admin) Viewer Logout (Admin)

Logout(User) Viewer Logout (User)

Setup Start (Local)

Enters into the menu.

Setup End (Local)

Comes out of menu.

Setup (Remote): Viewer

Sets the menu.

Play Back Start Starts the playback.

Play Back End Ends the playback.

Power Failure Recovery

Returns the system after power interruption.

Time Change Changes the Date/Time.

Load Factory Default Initializes the system.

System Upgrade Changes the system S/W.

Disk Full No Space in the HDD

Backup Start Starts the backup.

Backup End Ends the backup.

Backup Stop Stops the backup.

Backup Fail Backup Failure

ATA HDD Erase Erases the ATA Data.

USB HDD Erase

Erases the USB HDD data.

USB MEMORY Erase

Erases the USB MEMORY data.

Overwrite Playback Stop

Stops the playback by overwrite.

Backup Stop(Overwrite)

Stops the backup by overwrite.

Event Log

It is used to check the recorded events like alarm, motion, video loss, and such.

The log data contains the event execution data and time.



First: Moves to the first log page.



Prev: Moves to the previous log page.



Next: Moves to the next log page.



Last: Moves to the recent log page.

The event logs are as follows:

Video Loss CH[N] Means the occurrence

of Channel [N] Video Loss.

Alarm Detection CH[N] Means the occurrence

of Channel [N] alarm.

otion Detection CH[N] Means the occurrence

of Channel [N] Motion.

SHR-5162_Eng.indb 22 2007-06-18 ｿﾀﾀ・11:48:11

System Information Software Version

B3.07-K1.40-V2.17_0702101326 Broadcast Format NTSC Mac Address 00:00:FO:54:FF:FF

OK Cancel

System Information and Setup

USB S/W Upgrade Version

83.07-K1.40-V2.17C_0703141732

Device Information Device No Used/Total Erase Usage ATA 1 295.00K/139.92G Internal USB Memory 1 0.00/494.98M Backup

Cancel

Storage Setup

Disk End Mode

OverWrite

Disk End Beep Off

Alarm Setup HDD Location Map

Exit

No. Model Capacity Status

1 ST3250823ACE 250.05G Good 2 ST3160212ACE 160.04G Good 3 DVD RW - 4 ST3250823ACE 250.05G Good

HDD Installation Information

NG None

Duration 10 sec

Cancel

Alarm Setup

Check None

Duration 10 sec

Exit

HDD Location Map

05 MENU SETUP

menu setup _23

System Information and Setup

This setup window provides the following setting items:



Software Version: Displays the current software version. The value cannot be changed.



Broadcast Format: Displays the current broadcast format (NTSC/PAL). The value cannot be changed.



Mac Address: 6-Byte hardware address. The value cannot be changed.



USB S/W Upgrade

You can update the software using a USB device. If there is no device, None is displayed. If the USB memory has an upgrade software, its version is displayed. To upgrade the software stored in the USB device, select the check box on the right and press OK.

Storage Setup

You can configure the storage device related settings.



Device Information

Displays the number, capacity, and usage of ATA and USB devices. (The total capacity displayed may be lower than the actual capacity because the DVR uses some portion of it for internal purpose.) After selecting Erase for each device, you can remove the data on it. In case of USB device, you can set the usage for extension or backup. If you change the usage of the device, the stored data will be removed.



Disk End Mode

Stop: Stops recording when the disk is full while recording is still in progress.

Overwrite: Deletes the previously recorded data to store new data when the disk is full during recording.



Disk End Beep

On: Beeps when the disk is full while recording.

- Off: Although the disk is full while recording, it doesn’t make beep sound.



HDD Installation Information

When you click (

), The HDD Installation Information displays on the screen. Then you can see the model name, the capacity, and the status of the HDD in your DVR. The status displays Good, Not good, and Check. In the status of Not good, you should replace the HDD. In the status of Check, you should replace the HDD or check periodically. After clicking the Alarm Setup, you can set the alarm and the duration while the status is Not good or Check. If you click the HDD location map, it displays the information about the HDD installation. When a problem occurs, you can see which HDD has a problem.

The capacity of the HDD may differently appear in the Storage Setup menu and HDD Installation Information menu.

SHR-5162_Eng.indb 23 2007-06-18 ｿﾀﾀ・11:48:14

Export the Configurations to USB Memory Mode

Export

File Name 07011000 Include N/W Settings

Cancel

Export/Import the Configuration

Apply

Device None

Cancel

Remote Control Device

Remocon On ID:00

ID Baudrate Parity Date Stop Duplex

000 9600 None 8 1 Half Duplex

24_ menu setup

CAUTION

When the Disk end mode is set to Overwrite and the HDD overwrites the data that was previously backed up, the backup start time may be changed or the backup process may be cancelled. [Disk Overwrite] When Overwrite is selected, the previous event data is to be deleted and the mode is also changed.

[Built-in HDD] This is a physical hard disk connected to the IDE cable inside the main body, and it stores data.

[External HDD] This is a physical hard disk connected to the port and jack on the rear of the main body, and it also stores data. This can be used as an extended hard disk or backup hard disk.



Extended HDD: Supplements the builtin HDD. It is located on the top of the built-in HDD.



Backup HDD: Used for backup of the data recorded on the HDD.

[ATA]: Built-in HDD This is a disk drive implementation that integrates the controller on the HDD itself. It is a physical hard disk connected to the IDE cable inside the main body.

[USB]: External HDD

(Extension HDD or backup HDD) This is used for external HDD connection. The external HDD is connected through this USB port on the front or rear panel.

Export/Import the Configuration

This menu is used to export or import the DVRrelated settings to/from the USB memory.

The related settings are as the following:



Mode: You can select any of Import and Export.



File Name: In case of Export, the file name is displayed. The file naming convention is YYMMDD00. “00” is the serial number so it increases by 1. To change the file name, press the ENTER button. You can change the name using the virtual keyboard.



File Open: In case of Import, you can select the file that you want to import from the USB memory after pressing the ENTER button. When the importing completes, your DVR automatically reboots.



Include N/W Settings: In case of Export, this flag is selected by default. But with Import, you can decide whether or not to copy the network settings. Be careful when you select this because it will remove the previous

network settings.

Remote Control Device

This menu enables you to use the Samsung system keyboard or remote control.



Device

It indicates a remote control device that is connected to the RS485 port.



This is a unique ID of the device. This ID is necessary to control multiple DVRs.



Baudrate

Baud rate for communicating with cameras. It should be the same as the baud rate of cameras for communication.



Parity

Select one of None, Even, and Odd.



Data

Select one of 7 and 8.



Stop

Select 1 or 2 for stop bit.



Duplex

elect one of Half Duplex and Full Duplex. (Data

exchanging method)



Remocon

Set the remote control to On or Off. You can set the ID of remote control to any of 0 to 99.

SHR-5162_Eng.indb 24 2007-06-18 ｿﾀﾀ・11:48:15

+ 65 hidden pages