Samsung SCX-3207 User Manual [ru]

SCX-3200 Series

Multi-Functional Mono Printer

User’s Guide

imagine the possibilities

Thank you for purchasing a Samsung product.

copyright

© 2010 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.

• Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.

• PCL and PCL 6 are trademarks fo Hewlett-Packard Company.

• Microsoft, Windows, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.

• USFT® and MicroType™ are registed trademarks of Monotype Imaging Inc.

• iPad, iPhone, iPod touch, TrueType, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries. AirPrint and the AirPrint logo are

trademarks of Apple Inc.

• LaserWriter is a trademark of Apple Inc.

• All other brand or product names are trademarks of their respective companies or organizations.

Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

REV. 1.01

Copyright_ 2

safety information

These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place for future reference.

IMPORTANT SAFETY SYMBOLS

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of danger.

Explanation of all icons and signs used in the user’s guide:

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsafe practices that may result in minor personal injury or property damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

OPERATING ENVIRONMENT

Warning

Do not use if the power cord is damaged or if the electrical outlet is not grounded.

► This could result in electric shock or fire.

Do not place anything on top of the machine (water, small metal or heavy objects, candles, lit cigarettes, etc.).

► This could result in electric shock or fire.

Do not bend, or place heavy objects on the power cord.

► Stepping on or allowing the power cord to be crushed by a heavy object could result in electric shock or fire.

Do not remove the plug by pulling on the cord; do not handle the plug with wet hands.

► This could result in electric shock or fire.

Safety information_ 3

Caution

If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, imme

diately turn off the power switch and unplug the

machine. ► This could result in electric shock or fire.

Be careful, the paper output area is hot. ► Burns could occur.

If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface connections

request assistance from qualified service personnel.

and ► Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change in performance, unplug the machine from all interface

ections and request assistance from qualified service

conn personnel.

► Otherwise, this could result in ele

OPERATING METHOD

During an electrical storm or for a period of non-operation, remove the power plug from the ele

ctrical outlet.

► This could result in electric shock or fire.

ctric shock or fire.

If the plug does not easily enter the electrical outlet, do not attempt to force it in.

► Call an electrician to change the electrical outlet, or this could result in electric shock.

Do not allow pets to chew on the AC power, telephone or PC interface cords.

► This could result in electric shock or fire and/or injury to your pet.

If the machine does not operate properly after these instructions have been followed, unplug the machine from all interface conn service personnel.

► Otherwise, this could result in electric shock or fire.

ections and request assistance from qualified

Caution

Do not forcefully pull the paper out during printing. ► It can cause damage to the machine.

Be careful not to put your hand between the machine and paper tray.

► You may get injured.

Do not block or push objects into the ventilation opening. ► This could result in elevated component temperatures which

can cause damage or fire.

Be care when replacing paper or removing jammed paper. ► New paper has sharp edges and can cause painful cuts.

Safety information_ 4

When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch.

► Burns can occur.

When removing jammed paper, do not use tweezers or sharp metal objects.

► It can damage the machine.

Do not allow too many papers to stack up in the paper output tray.

► It can damage the machine.

This machine's power interception device is the power cord. ► To switch off the power supply, remove the power cord from

ectrical outlet.

the el

INSTALLATION / MOVING

Warning

Do not place the machine in an area with dust, humidity or water leaks.

► This could result in electric shock or fire.

Caution

Before moving the machine, turn the power off and disconnect all cords. Then lift the machine:

•

If the machine weighs under 20 kg (44.09lb), lift with

1 person.

• I

f the machine weighs 20 kg (44.09lb) - 40kg

(88.18lb), lift with 2 people.

• If the machine weighs more than 40 kg (88.18lb), lift

with 4 or more people.

► The machine could fall, causing injury or machine damage.

Do not place the machine on an unstable surface. ► The machine could fall, causing injury or machine damage.

The machine should be connected to the power level which is specified on the label.

► If you are unsure and want to check the power level you are

sing, contact the electrical utility company.

Use only No.26 AWG necessary.

► Otherwise, it can cause damage to the machine.

or larger, telephone line cord, if

Do not put a cover over the machine or place it in an airtight location, such as a closet.

► If the machine is not well-ventilated, this could result in fire.

Make sure you plug the power cord into a grounded electrical outlet.

► Otherwise, this could result in electric shock or fire.

Do not overload wall outlets and extension cords. ► This can diminish performance, and could result in electric

or fire.

shock

Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6 fe

et) with a 140V machine, then the gauge should be 16

AWG or larger. ► Otherwise, it can cause damage to

result in electric shock or fire.

the machine, and could

a. AWG: American Wire Gauge

MAINTENANCE / CHECKING

Caution

Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean machine with benzene, paint thinner or alcohol; do not spray water directly into the machine.

► This could result in electric shock or fire.

the

Safety information_ 5

Keep cleaning supplies away from children. ► Children could get hurt.

When you are working inside the machine replacing supplies or cleaning the insi machine.

► You could get injured.

de, do not operate the

Do not disassemble, repair or rebuild the machine by yourself.

► It can damage the machine. Call a certified tech

nician when the machine needs repair.

SUPPLY USAGE

Keep the power cable and the contact surface of the plug clean from dust or water.

► Otherwise, this could result in electr

Do not remove any covers or guards that are fastened with screws.

► The machine should only be repaired by a Samsung service technician.

ic shock or fire.

Caution

Do not disassemble the toner cartridge. ► Toner dust can be dangerous if inhaled or

ngested.

Do not burn any of the supplies such as toner cartridge or fuser unit.

► This could cause an explosion or uncontrollable fi

re.

To clean and operate the machine, strictly follow the user's guide provided with the machine.

► Otherwise, you could damage the machine.

Fuser units should only be repaired by a certified service technician.

► Repair by non-certified technicians could result in fire or

ectric shock.

When storing supplies such as toner cartridges, keep them away from children.

► Toner dust can be dangerous if inhaled or

sted.

inge

Using recycled supplies, such as toner, can cause damage to the machine.

► In case of damage due to the use of recycled supplies, a service

fee will be charged.

When changing the toner cartridge or removing jammed paper, be careful not to let toner dust touch your body or clothes.

► Toner dust can be dangerous if inhaled or ingested.

When toner gets on your clothing, do not use hot water to wash it.

► Hot water sets toner into fabric. Use cold water.

Safety information_ 6

regulatory information

This machine is designed for a normal work environment and certified with several regulatory statements.

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001.

Class I laser products are not considered to be laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

• Wavelength: 800 nm

• Beam d

- Paraller: 13 deg

- Perp

• Ma

ivergence

rees

endicular: 35 degrees

ximum power or energy output: 12 mW

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

hazardous. The laser system and printer are designed so there is never any human access to

OZONE SAFETY

During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area.

If you need additional information about ozone, contact your local Samsung dealer.

Regulatory information_ 7

POWER SAVE

This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR progra

RECYCLING

Recycle or dispose of the packaging material for this product in an environmentally responsible manner.

CHINA ONLY

m see http://www.energystar.gov.

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the reta how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and con with other commercial wastes for disposal.

iler where they purchased this product, or their local government office, for details of where and

ditions of the purchase contract. This product should not be mixed

RADIO FREQUENCY EMISSIONS

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thi

s device may not cause harmful interference, and

• This

This equipment has been tested and found to comply with the limits fo limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

device must accept any interference received, including interference that may cause undesired operation.

r a Class B digital device, pursuant to Part 15 of the FCC Rules. These

Regulatory information_ 8

• Reorient or relocate the receiving antenna.

• Incre

• Conn

• Consul

ase the separation between the equipment and receiver.

ect the equipment into an outlet on a circuit different from that to which the receiver is connected.

t the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectri norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.

UNITED STATES OF AMERICA

Federal Communications Commission (FCC)

Intentional emitter per FCC Part 15

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the United label.

The FCC has set a general guideline of 20 cm (8 inches) separati body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on. The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by the FCC.

This transmitter must not be collocated or operation Operation of this device is subject to the following two conditi

accept any interference received, including interference that may cause undesired operation of the device.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service.

ques applicables aux appareils numériques de Classe B prescrites dans la

States of America if an FCC ID number is on the system

on between the device and the body, for use of a wireless device near the

in conjunction with any other antenna or transmitter.

ons: (1) This device may not cause harmful interference, and (2) this device must

FCC Statement for Wireless LAN use:

TURKEY ONLY

GERMANY ONLY

While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times. This device cannot be colocated with another transmitter and transmitting antenna.

Regulatory information_ 9

RUSSIA ONLY

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.

Contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitabl

13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if

Important warning:

You must earth this machine. The wires in the mains lead have the following color code:

• G

reen and Yellow: Earth

• Blue: Neutral

• Brow

If the wires in the mains lead do not match the colors marked in your plug, do the following: You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or

green. You must connect the blue wire to the pin which You must connect the brown wire to the pin which is marked with th You must have a 13 amp fuse in the plug,

n: Live

is marked with the letter “N” or colored black.

adaptor, or at the distribution board.

e. However, some buildings (mainly old ones) do not have normal

you plug it into a socket.

e letter “L” or colored red.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated:

SCX-3200 Series: Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC) SCX-3205W(K): R&TTE Directive (1999/5/EC)

The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP) name to browse the EuDoC.

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), app

compatibility. March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommun

their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative.

Regulatory information_ 10

roximation of the laws of the Member States related to electromagnetic

the member states related to low voltage equipment.

ications terminal equipment and the mutual recognition of

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-Europ

telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries:

In the event of problems, you should contact the The product has been tested against TBR21. To assist in the use and ap

European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document.

Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

ean single terminal connection to the analogue public switched

plication of terminal equipment which complies with this standard, the

European Radio Approval Information (for products fitted with EU-approved radio devices)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the Europe with a Notified Body Registration Number and the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embed

European Commission through the R&TTE directive.

ded in you printer is well below the RF exposure limits as set by the

European States qualified under wireless approvals:

EU Austria, Belgium, Cyprus, Czech Republic, Den

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K. EEA/EFTA countries Iceland, Liechtenstein, Norway and Switzerland

mark, Estonia, Finland, France (with frequency restrictions), Germany, Greece, Hungary,

an Union or associated areas if a CE mark

European States with restrictions on use:

EU In France, the frequency range is restricted to 2446.5-2483.5 MHz for EEA/EFTA countries No limitations at this time

REGULATORY COMPLIANCE STATEMENTS

Wireless Guidance

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.

Additional limitations, cautions, and concerns for wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed.

The power output of the wireless device or devices that may be emb time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation.

As a general guideline, a separation of 20 cm (8 inches) betwe (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting.

This transmitter must not be collocated or operation Some circumstances require restrictions on wireless devices.

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices are examples of devices that provide wireless communication.

devices above 10 mW transmitting power such as wireless

specific countries are listed in the specific country sections (or country group sections). The

edded in your printer is well below the RF exposure limits as known at this

en the wireless device and the body, for use of a wireless device near the body

in conjunction with any other antenna or transmitter.

Examples of common restrictions are listed below:

Regulatory information_ 11

In environments where the risk of interference to other devices or device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device.

Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.

If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service.

Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.

OPENSSL LICENSE

1. Redi

2. Redi

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be

5. Pro

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS'' AND A BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (e Hudson (tjh@cryptsoft.com).

stributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. stributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

software developed by the OpenSSL Project for use i

Prior written permission. For written permission, please contact openssl-core@openssl.org.

ducts derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

OpenSSL Project for use in the OpenSSL

services is harmful or perceived as harmful, the option to use a wireless

out modification, are permitted provided that the following conditions are met:

n the OpenSSL Toolkit (http://www.openssl.org/)".

used to endorse or promote products derived from this software without

Toolkit (http://www.openssl.org/)".

NY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,

ay@cryptsoft.com). This product includes software written by Tim

ORIGINAL SSLEAY LICENSE

Netscapes SSL. This library is free for commercial and non-commercial use as lo

all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or with

1. Redi

2. Redi

stributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. stributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with

ng as the following conditions are adhered to. The following conditions apply to

out modification, are permitted provided that the following conditions are met:

Regulatory information_ 12

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes

cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)".

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.

Regulatory information_ 13

CHINA ONLY

Regulatory information_ 14

about this user’s guide

This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and use of the machine.

• Read the safety information before using the machine.

• If yo

• Terms used in

• Il

• T

CONVENTION

Some terms in this guide are used interchangeably, as below:

• Documen

• Paper

• M

achine refers to printer or MFP.

The following table offers the conventions of this guide:

Bold For texts on the display or button names on the machine. Power

Note Provides additional information or details for the machine function and feature.

Caution Contains information you can use to protect the machine from possible

Footnote Provides additional information on certain words or a phrases. a. pages per minute

(“Cross-reference”) Refers you to additional detailed information. (See "Finding more information" on

u have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 77).

this user’s guide are explained in the glossary chapter (See "Glossary" on page 96).

lustrations in this user’s guide may differ from your machine depending on its options or models.

he procedures in this user’s guide are mainly based on Windows XP.

t is synonymous with original.

is synonymous with media, or print media.

CONVENTION DESCRIPTION EXAMPLE

The date format may differ from country to country.

mechanical damage or malfunction.

Do not touch the surface of the drum located in the toner cartridge or imaging unit.

page 16).

About this user’s guide_ 15

FINDING MORE INFORMATION

You can find information about setting up and using your machine in the following resources, either as a print-out or on screen.

MATERIAL NAME DESCRIPTION

Quick Installation Guide

User’s Guide

Machine Driver Help This help provides you with information about the printer driver and instructions for setting up the options for printing (See "Using help"

Samsung website If you have Internet access, you can get help, support, machine drive

Downloadable

ftware

This guide provides information on setting up your machine. This guide is provided in the box with the printer.

This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine, troubleshooting, and replacing supplies.

on page 56).

www.samsung.com/printer.

You can download useful software programs from the Samsung website.

• Sa

msung AnyWeb Print: helps personal users to screen-capture the website screen in Windows Internet Explorer easily.

(http://solution.samsungprinte

• SyncThru™ Web Admin Service: provides convenient tools for network administrators who nee

simultaneously. This program is for network model o page 18)

r.com/personal/anywebprint)

nly. (http://solution.samsungprinter.com, See "Features by Models" on

rs, manuals, and order information from the Samsung website,

d to manage many machines

About this user’s guide_ 16

features of your new product

Your new machine is equipped with a number of special features that improve the quality of the documents you print.

SPECIAL FEATURES

Print with excellent quality and speed

• You can print with a resolution of up to 1200 x 1200 dpi

effective output.

• Your machin

letter-sized paper at up to 17 ppm.

Handle many different types of printable material

• The 150-sheet tray supports plain paper in various sizes,

letterhead, envelopes, labels, custom-sized media, postcards, and heavy paper.

Create professional documents

• Print Watermarks. You can customize your documents with

words, such as “Confidential” (See "Using watermarks" on page 57).

• Print Po

document are magnified and printed across the sheet of paper and can then be taped together to form a poster (See "Printing posters" on page 56).

• You can use

paper (See "Using overlays" on page 58).

Save time and money

• To save paper, you can print multiple pages on one single

sheet of paper (See "Printing multiple pages on one sheet of paper" on page 56).

• Th

is machine automatically conserves electricity by

substantially reducing power consumption when not in use.

• To

save paper, you can print on both sides of the paper manually (See "Printing on both sides of the paper (Manual)" on page 56).

e prints A4-sized paper at up to 16 ppm and

sters. The text and pictures of each page of your

preprinted forms and letterhead with plain

Copy the original in high quality

• You can copy the original and print them in enhanced image

quality and size.

Scan the originals

• Scan in color and use the precise compressions of BMP,

JPEG, TIFF and PDF formats.

• Use one

computer.

Eco Print

• You can reduce toner and paper usage (See "Eco Print

button" on page 22).

IPv6 (SCX-3205W(K) only)

• Th

page 34).

AirPrint

AirPrint allows you to wirelessly print directly from iPhone, iPad and iPod touch running iOS 4.2 or later.

button to scan your original to the connected

e machine supports IPv6 (See "IPv6 Configuration" on

Print in various environments

• You can print with various operating systems such as

Windows, Linux, and Macintosh OS systems.

• Your

• Your machin

• Your machine comes with a built-in network interface 802.11

machine is equipped with a Hi-Speed USB 2.0

interface.

e comes with a built-in network interface,

Ethernet 10/100 BaseTX. SCX-3205W(K) only)

b/g/n wireless LAN. (SCX-3205W(K) only) For some counties, only 802.11 b/g can be applied.

Features of your new product_ 17

FEATURES BY MODELS

The machine is designed to support all of your document needs from printing to more advanced networking solutions for your business. Features by models include:

FEATURES SCX-3200 SERIES SCX-3205W(K) SERIES

Print ● ●

Eco Print ● ●

Duplex (2-sided) printing (manual) ● ●

Copy ● ●

Scan ● ●

Hi-Speed USB 2.0 ● ●

Print Screen ●

IPv6 ●

Network Interface Ethernet 10/100 Base TX wired LAN ●

Network Interface 802.11b/g/n wireless LAN

SyncThru™ Web Service ●

a.Depending on your country, wireless LAN card may not be available. For some counties, only 802.11 b/g can be

applied. Contact your local Samsung dealer or the retailer where you bought your machine.

(●: Included, Blank: Not included)

●

Features of your new product_ 18

1.introduction

This chapter gives you an overview of your machine:

This chapter includes:

• Machine overview

• Control panel overview

MACHINE OVERVIEW

Front view

• Understanding the status LED

• Introducing the useful buttons

This illustration may differ from your machine depending on its model.

Scanner lid

Scanner glass

Control panel

Output tray (face down)

Output support

Front door

Tray

Paper length guide

Paper width guide

Scan unit

Inner cover

Toner cartridge

Toner cartridge handle

Toner cartridge drum

Introduction_ 19

Rear view

2 31

This illustration may differ from your machine depending on its model.

USB port

Power cord receptacle

Network port

a.SCX-3205W(K) only

Introduction_ 20

CONTROL PANEL OVERVIEW

11 9 10 112 3 4 5 6 7 8

1213

This control panel may differ from your machine depending on its model.

Power ( )

Eco Print Turn the Eco mode on or off (See "Eco Print button" on page 22).

Scan to Sends scanned data (See "Scanning originals and sending to your computer (Scan to PC)" on page 64).

ID Copy Allows you to copy both sides the ID card like a driver’s license to a single side of paper (See "ID card copying" on page 63).

Front LED

Back LED

Display Shows the number of pages you want to copy.

+/- Buttons Allows you to increase/decrease the number of page you want to copy (See "+/- buttons" on page 22).

Print Screen (SCX-3200 only)

WPS (SCX-3205W(K) on

ly)

Stop/Clear ( )

Start ( )

Wireless LED

(SCX-3205W(K) only)

Status LED Shows the status of your machine (See "Understanding the status LED" on page 22).

Allows you to turn the powe

When the LED lights on, place the front side of an ID card facing down on the scanner glass (See "ID card copying" on page 63).

When the LED lights on, place the back side of an ID card facing down on the scanner glass (See "ID card copying" on page 63).

Prints the displayed screen of your monitor (See "Print Screen button (SCX-3200 only)" on page 22).

Allows you to turn on or off the wireless network connection (See "WPS button (SCX-3205W(K))" on page 22).

Stops an operation at any time and there are more functions (See "Stop/Clear button" on page 23).

Begins a printing, copying or scanning job depending on which function you are using.

Shows the current status of the wirele

r on or off (See "Power button" on page 23).

ss network connection (See "Understanding the status LED" on page 22).

Introduction_ 21

UNDERSTANDING THE STATUS LED

Wireless LED (SCX-3205W(K) only)

Status LED

The color of the LED indicates the machine's current status.

STATUS LED DESCRIPTION

Off • The machine is off-line.

• T

he machine is in sleep mode.

Green On • The machine is in ready mode or warming up.

Blinking • When the LED blinks slowly, the machine is

Red On • T

Blinking • A small amou

Orange On A paper jam has occurred (See "Clearing paper

a.Estimated cartridge life means the expected or estimated toner

cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by interval, media type, and media size. Some amount of toner may remain in the cartridge even when red LED is on and the printer stops printing.

Samsung does not recommend using a non-genuine Samsung toner cartridge such as one that is refilled or remanufactured. Samsung cannot guarantee a non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty.

All printing errors will appear in the Smart Panel program window. If the problem persists, contact a service representative.

operating environment, percentage of image area, printing

receiving data from the computer or printing documents.

• W

hen the LED blinks rapidly, the machine is

operating special functions.

he inner cover is opened. Close the inner

cover completely.

• T

here is no paper in the tray. Load paper in the

tray.

• T

he machine has stopped due to a major error.

• Your

• A tone

• T

jams" on page 78).

system has some problems. If this problem occurs, contact a service representative.

r cartridge has almost reached its

estimated cartridge life replace the toner cartridge (See "Replacing the toner cartridge" on page 89).

nt of toner is left in the cartridge.

The estimated cartridge life Prepare a new cartridge for replacement. You

y temporarily increase the printing quality by

ma redistributing the toner (See "Redistributing toner" on page 77).

he machine is printing in manual feed mode or

in manual duplex mode.

. It is recommended to

of toner is close.

WIRELESS LED STATUS DESCRIPTION

Blue

Off (

On (

Slowly blinks

)

(

Fast blinks

)

(

Wireless network is disconnected.

)

Wireless network is connected.

)

The machine starts connecting to a wire

less network.

• Th

e machine is connecting to

access point (or wireless router).

• Wi

reless network connection is

being disconnected.

INTRODUCING THE USEFUL BUTTONS

Print Screen button (SCX-3200 only)

If you press Print Screen button for less than two seconds, the green light blinks fast on the Status LED, and then the machine prints the whole screen displayed in the monitor.

If you press Print Screen LED lights on green, and then the machine prints an active screen displayed in the monitor.

• The page will be printed on the default page like A4 or Letter.

• Print Screen

operating systems.

• You can only use this function with a USB-connected machine.

• Yo

u can use this function only when the Smart Panel program is

installed and running.

• Yo

u can only use this function in Eco Print mode off.

Eco Print button

You can turn the Eco Print mode on or off by simply pressing the button. If you set the Eco Print mode on, the machine automatically sets the 2-UP and Toner Save option on and print with those options.

1. Pres

2. Eco Print LED ligh

To turn off Eco Print mode, press Eco Print bu

s Eco Print button on the control panel.

+/- buttons

You can determine the number of copies (up to 99 copies) you want to copy by pressing +/- buttons. The default setting value is 1.

• If you press +/- buttons briefly, the number of copies

increases/decreases by single digits.

• If yo

u press +/- buttons long, the number of copies increases/decreases

by ten-fold.

WPS button (SCX-3205W(K))

This feature automatically detects which WPS (Wi-Fi Protected Setup™) mode your access point uses. By pushing a button on the wireless LAN router/access point and the machine, you can setup the wireless network and security settings (See "Wireless network setup (SCX-3205W(K))" on page 36).

button for more than two seconds, the Status

can only be used in the Windows and Macintosh

ts on. Then, Eco Print mode is on.

tton one more time.

Introduction_ 22

Stop/Clear button

By pressing Stop/Clear button, you can do the following functions.

FUNCTION DESCRIPTION

Printing a configuration report

Printing a network c

onfiguration report

(SCX-3205W(K) only)

Supplies information repor

Canceling print job

In ready mode, press and hold this button long enough (about two seconds) until the Status LED blinks slowly, and release the button (See "To print a configuration report" on page 24).

In ready mode, press and hold this button for fo

ur seconds until the Status LED blinks fast,

and release the button (See "Printing a network configuration report" on page 30).

In the ready mode, press and hold this button for about 6 seconds until the Status LED is on, and release (See "To print a supplies information report" on page 24).

Press operation. The print job is cleared from both th machine returns to ready mode. This may take some time depending on the size of the print job.

Stop/Clear button during a

e machine and the computer and then the

Power button

By pressing Power button, you can turn the machine on or off.

Turning on the machine

1. Plug in the power cord.

ess Power button on the control panel.

2. Pr

When the machine is powered on, you can see LED looping on the displ

ay. Then, the machine is in ready mode.

If you want to turn the power off, press and hold this button for about two seconds.

Introduction_ 23

2.getting started

2mm (0.08 in)

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

• Setting up the hardware

• Printing a report

• Supplied software

• System requirements

• Installing USB connected machine’s driver

• Sharing your machine locally

SETTING UP THE HARDWARE

This section shows the steps to set up the hardware, as is explained in the Quick Installation Guide. Make sure you read the Quick Installation Guide first and follow the steps below:

Location

1. Select a stable location.

Select a level, stable place with adequate sp extra space for opening cover(s) and tray(s).

The area should be well ventilated and away from direct sunlight or sources of

heat, cold, and humidity. Do not set the machine close to the

edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing (See "Altitude adjustment" on page 46).

Place the machine on a flat, stable surface so th greater than 2 mm (0.08 inch). Otherwise, printing quality may be affected.

ace for air circulation. Allow

at there is no incline

6. Make

7. T

sure that all cables are connected to the machine.

urn the machine on (See "Turning on the machine" on page 23).

This machine will not operate when the power main fails.

PRINTING A REPORT

Print a configuration or supplies information page to make sure that the machine is operating properly.

To print a configuration report

In the ready mode, press and hold Stop/Clear button on the control panel for long enough (about two seconds) until the Status LED blinks slowly, and release.

For SCX-3205W(K), you can print a network configuration report (See "Printing a network configuration report" on page 30).

To print a supplies information report

In the ready mode, press and hold Stop/Clear button on the control panel for about six seconds until the Status LED lights on, and release.

SUPPLIED SOFTWARE

After you have set up your machine and connected it to your computer, you must install the printer software. If you user, install the software from the supplied CD and if you are a Linux OS user, download the software from the Samsung website (www.samsung.com/printer) and install.

Machine software is occasionally updated for reasons like the release of new operating system version from the Samsung website (w

are a Windows or Macintosh OS

and etc. If needed, download the latest

ww.samsung.com/printer).

2. Unpack the machine and check all the enclosed items.

3. Remove tape

4. In

stall the toner cartridge.

5. Loa

d paper (See "Loading originals" on page 48).

holding the machine securely.

Getting started_ 24

OS CONTENTS

Windows • Printer driver: Use this driver to take full advantage of

Macintosh • Printer Driver

Linux • U

a.Allows you to edit a scanned image in various ways using a powerful

e editor and to send the image by email. You can also open

imag another image editor program such as Adobe Photoshop, from SmarThru. For details, refer to the on-screen help supplied on the SmarThru program (See "SmarThru" on page 70).

your machine’s features.

• Scanner driver: TWAIN and Windows Image

Acquisition (WIA) drivers are available for scanning documents on your machine.

• Smart Panel

machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70).

• SmarThru

indows-based software for your multifunctional

machine.

• Sa

msung Scan and Fax Manager: You can find out

about Samsung Scan and Fax Manager program information and installed scan driver's condition.

• Printer Settings

up printer’s other options from your computer.

• SetIP

addresses. (SCX-3205W(K) only)

your machine’s features.

• Sc

anner driver: TWAIN driver is available for scanning

documents on your machine.

• Smart Panel

machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70).

• Sa

msung Scan and Fax Manager: You can find out

about Samsung Scan and Fax Manager program information and installed scan driver's condition.

• Printer Settings

up printer’s other options from your computer.

• SetIP

addresses. (SCX-3205W(K) only)

nified Linux Driver: Use this driver to take full

advantage of your machine’s features.

• SANE

• Smart Panel

machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70).

• Printer Settings

up printer’s other options from your computer.

• SetIP

addresses. (SCX-3205W(K) only)

: This program allows you to monitor the

This program is the accompanying

Utility: This program allows you to set

: Use this program to set your machine’s TCP/IP

: Use this driver to take full advantage of

: This program allows you to monitor the

Utility: This program allows you to set

: Use this program to set your machine’s TCP/IP

: Use this driver to scan documents.

: This program allows you to monitor the

Utility: This program allows you to set

: Use this program to set your machine’s TCP/IP

SYSTEM REQUIREMENTS

Before you begin, ensure that your system meets the following requirements:

Windows

Your machine supports the following Windows operating systems.

REQUIREMENT (RECOMMENDED)

OPERATING

SYSTEM

Windows® 2000

Windows® XP Intel® Pentium® III 933

Windows Se

rver® 2003

Windows Se

rver® 2008

Windows Vista®

Windows® 7 Intel® Pentium® IV 1 GHz

Windows Se

rver® 2008

• Internet Explorer® 5.0 or higher is the minimum requirement for all

Windows operating systems.

• Windows Terminal Services is compatible with your machine.

Intel® Pentium® II 400 MHz (Pentium III 933 MHz)

MHz (Pentium IV 1 GHz)

Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)

Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)

Intel® Pentium® IV 3 GHz 512 MB

32-bi or higher

• Support for DirectX® 9 graphics with 128 MB

memory (to enable the Aero theme).

• DVD-R/W Drive

Intel® Pentium® IV 1 GHz (x86) processors (2 GHz or faster)

Macintosh

OPERATING

SYSTEM

Mac OS X

10.3 ~ 10.4

• Int

Processors

• PowerPC G4/ G5

CPU RAM

64 MB (128 MB)

128 MB (256 MB)

128 MB (512 MB)

512 MB (2 GB)

(1 GB)

1 GB

t or 64-bit processor

or 1.4 GHz (x64)

REQUIREMENTS (RECOMMENDED)

CPU RAM

el®

• 128 MB for a

• 512

(2 GB)

512 MB (2 GB)

PowerPC based Mac (512 MB)

MB for a Intel-based Mac (1 GB)

600 MB

1.5 GB

1.25 GB to 2 GB

10 GB

15 GB

16 GB

10 GB

1 GB

FREE

HDD

SPACE

FREE

HDD

SPACE

Getting started_ 25

OPERATING

SYSTEM

Mac OS X

10.5

Mac OS X

10.6

Linux

ITEM REQUIREMENTS

REQUIREMENTS (RECOMMENDED)

CPU RAM

• Intel®

Processors

• 86

7 MHz or faster Power PC G4/ G5

• Intel®

Processors

FREE

SPACE

512 MB (1 GB) 1 GB

1 GB (2 GB) 1 GB

HDD

Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM Drive and click OK.

• If the AutoPlay window appears in Windows Vista, Windows 7 or

Windows 2008 Server R2, click Run Setup.exe in Install or run

program field, and click Continue or Yes in the User Account Control window.

3. Select In

stall now.

Operating system

RedHat® Enterprise Linux WS 4, 5 (32/64 bit) Fedora 4, 5, 6, 7, 8, 9, 10, 11, 12 (32/64 bit) SuSE Linux 10.0, 10.1 (32 bit)

OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32.64 bit) Mandriva 2005, 2006, 2007, 2008, 2009, 2009.1 (32/64 bit) Ubuntu 5.04, 5.10, 6.06, 6.1

0, 7.04, 7.10, 8.04, 8.10,

9.04, 9.10 (32/64 bit) SuSE Linux Enterprise Desktop 10, 11 (32/64 bit) Debian 4.0, 5.0 (32/64 bit)

CPU Pentium IV 2.4 GHz (Intel Core™2)

RAM 512 MB (1 GB)

Free HDD space 1 GB (2 GB)

INSTALLING USB CONNECTED MACHINE’S DRIVER

A locally connected machine is a machine directly connected to your computer by a USB cable.

Only use a USB cable no longer than 3 m (10 ft.).

Windows

You can install the machine software using the typical or custom method. The following steps are recommended for most users who use a machine

irectly connected to your computer. All components necessary for machine

operations will be installed.

ke sure that the machine is connected to the computer and powered

1. Ma

on.

If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel to close the window.

2. Insert the supplied software CD into your CD-ROM drive.

• Th

e software CD should automatically run and an installation window

will appear.

• If the in

Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM Drive. Click OK.

• If you use Wi

click Start > All programs > Accessories > Run.

stallation window does not appear, click Start and then Run.

ndows Vista, Windows 7 or Windows 2008 Server R2

If necessary, select a language from the drop-down list.

• For SCX-3205W(K), you can access the Wireless Setting and

Installation menu. The menu allows you to install a wireless network to connect to the machine with an USB cable (See "Wireless network setup (SCX-3205W(K))" on page 36).

• The

Advanced Installation has two options, Custom

Installation and Install Software Only. The Custom Installation allows you to select the machine’s connection and choose individual component to install. The Install Software Only allows you to install the supplied software, such as Smart

Panel. Follow the instruction on the window.

4. R

ead the License Agreement, and select I accept the terms of the

License Agreement. Then, click Next.

The software searches for the machine.

If your machine is not connected to the computer, the following

Getting started_ 26

window will appear.

• After connecting the machine, click Next.

• Ch

eck if you want to install the software without

connection of the printer.

- Ch

eck this option to install the software without a machine connected. In this case, the print a test page window will be skipped, and completes the installation.

• Sear

ch again

When you press this button,

the firewall notice window

appears.

- T

urn off the firewall and Search again. For Windows operating system, click Start > Control Panel > Windows Firewall, and inactivate this option.

- T

urn off the firewall from the third party's program beside the operating system. Refer to the manual provided by individual programs.

• Direct

The Dir

Input

ect Input allows you to search a specific machine on

the network.

- Search by IP address: Enter the IP address or the host

name. Then click Next. To verify your machine’s IP address, print a network

nfiguration report (See "Printing a network configuration

report" on page 30).

- Se

arch by network path: To find a shared machine (UNC

Path), enter the shared name manually or find a shared printer by clicking the Browse button. Then click Next.

• Help

- T

his help button gives you the detailed information about

how to connect the machine.

5. The searched machines will be shown on the screen. Select the one you wish to use and click Next.

If the software searched only one machine, the confirmation window appears.

6. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page.

Otherwise, just click Next an

7. If

the test page prints out correctly, click Yes.

If not, click No

8. If you wa

to reprint it.

nt to register your machine on Samsung web site, click On-line

d skip to step 8.

Registration.

If your machine is not connected yet to the network or computer, click How to connect?. How to connect? gives detailed information about how to connect the machine. Follow the instructions in the window.

9. Click Finish.

If the printer driver does not work properly, follow the steps below to repair or reinstall the driver.

a) Make

sure that the machine is connected to your machine and

powered on.

b) Fro

m the Start menu, select Programs or All Programs >

Samsung Printers > your printer driver name > Uninstall.

c) Select the option you wish to execute, then follow the instruction

on the window.

Macintosh

1. Make sure that the machine is connected to your computer and powered

on.

2. Inse

3. D

4. D

5. D

6. En

7. T

8. R

9. Click Agre

10. Select Ea

11. When

12. Select Typi

13. After the installation is finished, click Restart.

14. Open the Appl

15. Click Add o

16. F

17. F

18. Click Add.

rt the supplied software CD into your CD-ROM drive.

ouble-click the CD-ROM icon that appears on your Macintosh desktop. ouble-click the MAC_Installer folder. ouble-click the Installer OS X icon.

ter the password and click OK.

he Samsung Installer window opens. Click Continue.

ead the license agreement and click Continue.

e to agree to the license agreement.

sy Install and click Install. Easy Install is recommended for

most users. All components necessary for machine operations will be installed.

If you select C

ustom Install, you can choose individual components to

install.

the message which warns that all applications will close on your

computer appears, click Continue.

cal installation for a network printer for a network printer

and then click OK.

ications folder > Utilities > Print Setup Utility.

• For Mac OS X

10.5 ~ 10.6, open the Applications folder > System

Preferences and click Print & Fax.

n the Printer List.

• For Mac OS X

10.5 ~ 10.6, click the “+” icon; a display window will

pop up.

or Mac OS X 10.3, select the USB tab.

• For Mac OS X10.4,

click Default Browser and find the USB

connection.

• For Mac OS X 10.5 ~ 10.6, click Default and find the USB

connection.

or Mac OS X 10.3, if Auto Select does not work properly, select

Samsung in Printer Model and your machine name in Model Name.

• For Mac OS X

10.4, if Auto Select does not work properly, select

Samsung in Print Using and your machine name in Model.

• For Mac OS X

10.5 ~ 10.6, if Auto Select does not work properly,

select Select a driver to use... and your machine name in Print Using.

Your machine appears on the Printer List,

and is set as the default

machine.

Getting started_ 27

If the printer driver does not work properly, uninstall the driver and reinstall it.

Follow steps below to uninstall the driver for Macintosh.

a) Ma

ke sure that the machine is connected to your computer and

powered on.

b) In

sert the supplied software CD into your CD-ROM drive.

c) Doub

le-click CD-ROM icon that appears on your Macintosh

desktop.

d) Doub e) Doub f) Ente g) The h) Read i) Click Agr j) Select Unins k) Whe

le-click the MAC_Installer folder. le-click the Installer OS X icon.

r the password and click OK.

Samsung Installer window opens. Click Continue.

the license agreement and click Continue.

ee to agree to the license agreement.

tall and click Uninstall.

n the message which warns that all applications will close on

your computer appears, Click Continue.

l) Whe

n the uninstall is done, click Quit.

Linux

You need to download Linux software packages from the Samsung website to install the printer software.

Follow the steps below to install the software.

Installing the Unified Linux Driver

1. Make sure that the machine is connected to your computer and

powered on.

2. When the Administrator Login window appears, type in root in the Login field and enter the system password.

You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator.

3. Fro

m the Samsung website, download the Unified Linux Driver

package to your computer.

4. Right-click the Unified Linux Driver package and extract the package.

5. Dou

6. Wh

ble-click cdroot > autorun.

en the welcome screen appears, click Next.

Installing the Smart Panel

1. Make sure that the machine is connected to your computer and

powered on.

2. W

hen the Administrator Login window appears, type in root in the

You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator.

3. From th

e Samsung website, download the Smart Panel package to

your computer.

4. Righ

5. Doub

t-click the Smart Panel package and extract the package.

le-click cdroot > Linux > smartpanel > install.sh.

Installing the Printer Settings Utility

1. Make sure that the machine is connected to your computer and

powered on.

2. W

hen the Administrator Login window appears, type in root in the

You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator.

3. From th

package to your computer.

4. Right-click the Printer Settings Utility package and extract the

package.

5. Doub

e Samsung website, download the Printer Settings Utility

le-click cdroot > Linux > psu > install.sh.

If the printer driver does not work properly, uninstall the driver and reinstall it.

Follow the steps below steps to uninstall the driver for Linux.

a) Ma

ke sure that the machine is connected to your computer and

powered on.

b) W

hen the Administrator Login window appears, type in “root”

in the Login field and enter the system password. You must log in as a super user (root) to uninstall the printer

driver. If you are

not a super user, ask your system

administrator.

c) Click the icon

at the bottom of the desktop. When the Terminal

screen appears, type in: [root@localhost root]#cd /opt/Sa

msung/mfp/uninstall/

[root@localhost uninstall]#./uninstall.sh

d) Click Unin

stall.

e) Click Next. f) Click Fi

nish.

7. When the installation is complete, click Finish.

The installation program added the Uni

fied Driver Configurator desktop icon and the Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the on screen help that is available through your system menu or from the driver package Windows applications, such as Unified Driver Configurator.

Getting started_ 28

SHARING YOUR MACHINE LOCALLY

Follow the steps below to set up computers to share your machine locally. If the Host computer is directly connected to the machine by a USB cable

and is also connected to the local network environment, the client computer connected to the local network can use the shared machine through the host computer to print.

Host computer A computer which is directly connected to

Client computers Computers which use the machine shared

Windows

Setting up a host computer

1. Install your printer driver (See "Installing USB connected machine’s

driver" on page 26).

2. Cli

ck the Windows Start menu.

3. Fo

r Windows 2000, select Settings > Printers.

• F

or Windows XP/Server 2003, select Printers and Faxes.

• F

or Windows Server 2008/Vista, select Control Panel >

Hardware and Sound > Printers.

• For Windows 7, select Co

Devices and Printers.

• For Windows Server 2008 R2, select Control Panel > Hardware

> Devices and Printers.

4. Rig

ht-click the printer icon.

5. Fo

r Windows XP/Vista/Server 2003/Server 2008, press Properties.

For Windows 7/Windows Server 2008 R2, from context menus, select the Printer p

If Printer properties item has a ► mark, you can select other printer drivers connected with the selected printer.

6. Select the Sharing tab.

If you are a Windows 7/Windows Server 2008 R2 user, check the Change Sharing Options.

7. Check the Share this printer checkbox.

8. Fi

ll in the Share Name field. Click OK.

the machine by USB cable.

through the host computer.

ntrol Panel > Hardware and Sound >

roperties.

In case host computer requires a User name and Password, fill in User ID and password of the host computer account.

5. Right-click the printer icon you want to share and select Connect.

6. If a se

7. Ope

t up complete message appears, click OK.

n the file you want to print and start printing.

Macintosh

The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help for other OS versions.

Setting up a host computer

1. Install your printer driver (See "Macintosh" on page 27).

2. Ope

3. Select

4. Select Sh

Setting up a client computer

1. Install your printer driver (See "Macintosh" on page 27).

2. Ope

3. Click the “+” icon.

4. Select y

n the Applications folder > System Preferences and click

Print & Fax.

the printer to share in the Printers list.

are this printer.

n the Applications folder > System Preferences and click

Print & Fax.

A display window showing the name of your shared printer appears.

our machine and click Add.

Setting up a client computer

1. Install your printer driver (See "Installing USB connected machine’s

driver" on page 26).

2. Click the Windows Start menu.

3. Select Al

4. Enter the

press Enter in your keyboard.

l programs > Accessories > Windows Explorer. IP address of the host computer in the address bar and

Getting started_ 29

3.network setup (scx-3205w(k) only)

This chapter gives you step-by-step instructions for setting up the network connected machine and software.

This chapter includes:

• Network environment

• Introducing useful network programs

• Using a wired network

• Installing network connected machine’s driver

• IPv6 Configuration

NETWORK ENVIRONMENT

You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the network setting programs.

The following table shows the network en machine.

ITEM REQUIREMENTS

Network interface • Ethernet 10/100 Base-TX

• 802.11

Network operating system • Win

• Variou

• Ma

Network protocols • TCP/IPv4

• DHCP, BOOTP

• DNS, WINS, Bo

• Stan

• SNMPv 1/2/3, HTTP

• TCP/IPv6

Wireless security • Auth

• Encryp

vironments supported by the

b/g/n Wireless LAN

dows 2000/Server 2003 /Server

2008/XP/Vista/7/Server 2008 R2

s Linux OS

c OS X 10.3 ~ 10.6

njour, SLP, UPnP

dard TCP/IP Printing (RAW), LPR,

IPP

(DHCP, DNS, RAW, LPR,

SNMPv 1/2/3, HTTP) (See "IPv6 Configuration" on page 34.)

entication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)

tion: WEP64, WEP128, TKIP,

AES

SyncThru™ Web Service

Web server embedded on your network machine, which allows you to do the following tasks.

• You can configure the network parameters necessary for the machine to

connect to various network environments.

• You c

an customize machine settings

(See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on page 69).

SyncThru™ Web Admin Service

Web-based machine management solution for network administrator. SyncThru™ Web Admin Service provides you with an efficient way of

man

aging network devices and lets you remotely monitor and troubleshoot

network machines from any site with corporate internet access.

• D

ownload this program from http://solution.samsungprinter.com.

SetIP

This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol.

• See "IPv4 setting using SetIP Program (Windows)" on page 31.

• See "IPv4 setting using SetIP Program (Macintosh)" on page 31.

• See "IPv4 setting using SetIP Program (Linux)" on page 32.

TCP/IPv6 is not supported by this program.

USING A WIRED NETWORK

You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished.

You can use network after connecting network cable to a corresponding port on your machine.

a.Depending on your country, wireless LAN card may not be available.

For some counties, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you bought your machine.

INTRODUCING USEFUL NETWORK PROGRAMS

There are several programs available to setup the network settings easily in network environment. For the network administrator especially, managing several machines on the network is possible.

Before using the programs below, set the IP address first.

Network setup (SCX-3205W(K) only)_ 30

Printing a network configuration report

You can print a network configuration report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshoot problems.

+ 70 hidden pages