Samsung SC-DXIO3 User Manual

ii_;iiiiii_i__f_ii_i!(_i!_i_i_:_iiiii_!!i_iii___i_

_ __- th possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please

www.samsung.com/global/register

3 1/2 inch DVD disc camcorder DVD-VIDEO recording with 3 I/2 inch (8cm) DVD-RW/+RWi-R/+R DL (Dual Layer) discs.

2.7" wide (16:9) LCD screen (112K pixels)

The 2.7" wide (16:9) LCD screen provides excellent viewing clarity with improved resolution. The 112K pixels LCD

screen rotates up to 270 degrees for multiple viewing angles providing sharp, detailed images for monitoring or playback, and the widescreen format makes shooting in 16:9 mode and composing shots even easier.

Capture visions farther than the eye can see (34X optical/1200X digital zoom) Samsung's powerful optical zoom lenses bring the world closer without sacrificing image quality. In addition, digital zoom interpolation means that extreme digital zooming is clearer, with less distortion than previous types of

digital zooms.

Viewing images on your PC and using PC CAM With DV Media PRO, you can view the recorded images on a PC and use PC

cam function by connecting the DVD camcorder to a PC. _pages 90-97

Voice Plus You can add your voice to the movie image by connecting the DVD camcorder to a TV.

_-,page 89

ih English

,,--m

What the icons and signs in this user manual mean:

/'_ Means that death or serious personal injury is a risk.

WARNING

/i_k Means that there is a potential risk for personal injury or material damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when using your DVD

CAUTION camcorder, follow these basic safety precautions:

l_} Means hints or referential pages that may be helpful when operating the DVD camcorder.

These warning signs are here to prevent injury to you and others.

Please fellow them explicitly. After reading this section, keep it in a safe place for future reference.

This symbol indicates that dangerous voltage consisting a risk of

RISKOF ELECTRICSHOCK

DO NOTOPEN

, ,,,,,,,,,,,,

CAUTION:TO REDUCETHERtSKOF ELECTRICSHOCK,

DO NOT REMOVECOVER(ORBACK).

NO USER-SERVICEABLEPARTSINSIDE

REFERSERVICINGTO QUALIFIEDSERVICEPERSONNEL,

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit. !

Warning To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture."

Caution

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains

plug shall be readily operable.

English iii

irneortant safety inst uc£c)ns

I J

1. Read these instructions. 12.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water,

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus,

11. Only use attachment/accessories specified by the manufacturer.

13.

14. Refer all servicing to qualified service personnel.

!5. Apparatus shall not be exposed to dripping or

16. VENTILATION:

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination

to avoid iniury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods

of time.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

splashing and no obiects filled with liquids, such as vases, shall be placed on the apparatus.

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered.

Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat

proper ventilation is provided or the manufacturer's instructions have been adhered to.

iv English

17. POWERSOURCES: TheCAMCORDERshould be operated onlyfrom the

type of powersource indicatedon thelabel. Ifyou are

not sureof the type of power supply at your home, consultyour appliance dealeror localpowercompany. A CAMCORDERis intendedto beoperated from battery,power, or other sources, referto the operating

instructions.

18. GROUNDINGOR POLARIZATION: ThisCAMCORDERmaybe equippedwith eithera

polarized2-wire AC lineplug (aplug havingone blade wider thanthe other)or a 3-wire grounding type plug, a plug havinga third (grounding)pin. Ifyou are unable to insertthe plug fullyinto the outlet,try reversingthe

plug. Ifthe plugstillfailsto fit,contact your electrician to replaceyour outlet. Donot defeatthe safetypurpose of the polarizedplug.

19, POWER-CORDPROTECTION:

Power-supplycords shouldbe routedsothat theyare not likelyto be walked on or pinchedby itemsplaced upon or againstthem, payingparticularattentionto cords or plugs, convenientreceptacles,and the point wherethey exit from the unit.

20. OUTDOORANTENNAGROUNDING: CAMCORDER,be surethe antennaor cable system is

groundedto provide some protection againstvoltage surgesand built-upstatic charges, Section 810 of the

NationalElectricalCode,ANSliNFPANo.

70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure,

grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding

electrode. See figure below.

21.

LIGHTNING: For added protection of this CAMCORDER during a

lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will

prevent damage to the CAMCORDER due to lightning and powerline surges.

English _v

irnaortant safety instruot'ons

.,/

22. POWER LINES: An outside antenna system should not be located in

the vicinity of overhead power lines or other electric

light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching such power lines or circuits as contact with

them might be fatal.

23. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

24. OBJECTS AND LIQUIDS: Never push objects of any kind into this CAMCORDER

through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25. SERVICING: Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

26. DAMAGE REQUIRING SERVICE: Unplug this CAMCORDER from the wall outlet and

refer servicing to qualified service personnel under the

following conditions:

a. When the power-supply cord or plug is damaged.

b. If any liquid has been spilled onto, or obiects have

fallen into the CAMCORDER.

c. If the CAMCORDER has been exposed to rain or

water.

d. If the CAMCORDER does not operate normally

by following the operating instructions, adjust only

those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore

the CAMCORDER to its normal operation.

e. Ifthe CAMCORDER has been dropped or the

cabinet has been damaged.

f. When the CAMCORDER exhibits a distinct change

in performance, this indicates a need for service.

REPLACEMENT PARTS:

27. When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other

hazards. SAFETY CHECK:

28_

Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform

safety checks to determine that the CAMCORDER is in safe operating order.

vi English

29. Topreventdamage which may resultinfire or shock hazard,do not exposethis applianceto rainor

moisture.

30. If this powersupply isused at 240Vac, asuitableplug adaptor should be used.

3!. This product is covered byone or moreof the following

U.S, patents: 5,060,2205,457,669

6,438,0996,467,061 6,728,4746,771,891

6,996,3277,009,926 7,099,5667,123,564

7,146,6247,151,729

7,173,8917,177,250 7,210,067

7,263,045 7,283,729

USER INSTALLER CAUTION: Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved

by this party responsible for compliance to part 15 FCC rules. NOTE:

O LAMP(S} INSIDE THiS PRODUCT CONTAIN MERCURY AND

MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see

lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864)

CALIFORNIA USA ONLY

This Perchlorate warning applies onty to primary CR

(Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA

" Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perohlorate."

7,228,0627,245,5667,245,5677,257,065 7,269,l107,272,0867,272,1067,280,460 7,286,4547,304,938

5,561,6495,705,7626,043,912 6,556,5216,578,1636,697,307

6,894,9636,895,5936,937,8t5 7,085,2217,088,6497,092,327

7,142,4937,142,4957,145,861 7,161,8797,164,6477,167,437

7,194,1877,203,8917,209,423

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Ifthis equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and

receiver. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician

for help and for additional suggestions. The user may find the following booklet prepared by the

Federal Communications Commission helpful: "How to identify and Resolve Radio--R/Interference Problems."

This Booklet is available from the U.S. Government

Printing Office, Washington, D.C. 20402, Stock No.

004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not

expressly approved by the manufacturer could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation,

English ._vii

,, This camcorder should always be connected to an AC outlet with a protective grounding connection.

- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

If this power supply is used at 240V ac, a suitable plug adaptor should be used.

PRODUCTO LASER CLASE 1

BEFORE USING THIS CAMCORDER

Warning!

Caution

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

This DVD camcorder records video in MPEG2 format in the DVD camcorder mode, MPEG4 format in the digital camera mode and at Standard Resolution (SD-VIDEO).

Please note that this DVD camcorder is not compatible with other digital video.

Before recording important video, make a trial recording. Play back your trial recording to make sure the video and audio have been recorded properly.

The recorded contents cannot be compensated for:

Samsung cannot compensate for any damage caused when a recording cannot be played back because of

a defect in the DVD camcorder or memory card. Samsung cannot be responsible for your recorded video and audio.

Recorded contents may be lost due to a mistake when handling this DVD camcorder or memory card, etc. Samsung shall not be responsible for compensation for damages due to the loss of recorded contents.

viii English

Makeabackupofimportantrecordeddata, ProtectyourimportantrecordeddatabycopyingthefilestoPC.Wealsorecommendyoucopyit fromyourPCto otherrecording

mediaforstorage.RefertothesoftwareinstallationandUSBconnectionguide. Copyright:PleasenotethatthisDVDcamcorderisintendedforpersonaluseonly.

DatarecordedonthecardinthisDVDcamcorderusingotherdigital/analogmediaordevicesisprotectedbythecopyrightactand cannotbeusedwithoutpermissionoftheownerofcopyright,exceptforpersonalenioyment,Evenifyourecordaneventsuchasa

show,performanceorexhibitionforpersonalenioyment,itisstronglyrecommendedthatyouobtainpermissionbeforehand.

ABOUT THIS USER MANUAL

- This user manual covers models SC-DX100/DXIO3/DX105. SC-DX103/DX105 have two storage media, Disc and Card. Although the external appearance is different, they operate in the same way.

• illustrations of model SC-DX105 are used in this user manual.

• The displays in this user manual may not be exactly the same as those you see on the LODscreen.

• Designs and specifications of the camcorder and other accessories aresubiect to change without any notice.

Q) MARKS NEXT TO MENU HEADINGS

• Some functions of this DVD camcorder are unavailable with memory card or disc. Refer to the marks to the right of each function to identify whether the memory card or disc is compatible with the

function. Refer to these marks and identify the functions and operation to match the memory, card or disc you use.

NOTES REGARDING TRADEMARKS

° All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung

product are trademarks or registered trademarks of their respective holders.

• Windows@ is registered trademark or trademark of Microsoft Corporation, registered inthe United States and other countries.

• Macintosh is the trademark of Apple Computer, inc.

° All the other product names mentioned herein may be the trademark or registered trademarks of their respective companies. ° Furthermore, "TM" and "R" are not mentioned in each case in this manual.

• Manufactured under license from Dolby Laboratories.

;Tt_nEO CnEATOR

° "Dolby" and the doubte-D symbol aretrademarks of Dolby Laboratones,

......

English iix

or- autions when usirsa

IMPORTANT NOTE

• Handle the liquid crystal display (LCD) with care: The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp obiect.

- If you push the LCD surface, unevenness in display may occur, if unevenness does not disappear, turn the camcorder off, wait for a few moments, then turn it on again. Do not place the camcorder with the open LCD screen down.

Close the LCD monitor when not using the camcorder.

° Liquid crystal display :

- The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal brightness will be restored when the temperature inside tile

camcorder rises. This has no effect on the images in the storage media, so there Ksno cause for concern.

• Hold the DVD camcorder correctly:

- Do not hold the DVD camcorder by the LCD monitor when lifting it: the viewfinder or LCD monitor could detach and the DVD camcorder may fall.

Do not subject the DVD camcorder to impact:

- This DVD camcorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall.

- Do not use the DVD camcorder on a tripod in a place where it is subiect to severe vibrations or impact.

• No sand or dust! Fine sand or dust entering the DVD camcorder or AC power adaptor could cause malfunctions or defects.

° No water or oil!

Water or oil entering the DVD camcorder or AC power adaptor could cause electric shock, malfunctions or defects.

• Heat on surface of product:

The surface of the DVD camcorder will be slightly warm when in use, but this does not indicate a fault.

• Be careful of ambient temperature:

Using the DVD camcorder in a place where the temperature is over 60°C (140°F) or under 0°C (32°F) will result in abnormal recording/playback.

Do not leave the DVD camcorder on a beach or in a closed vehicle where the temperature is very high for a long time: This could cause a malfunction.

• Do not point directly at the sun: If direct sunlight strikes the lens, the DVD camcorder could malfunction or a fire could occur. Do not leave the DVD camcorder with the LCD screen exposed to direct sunlight: This could cause a malfunction.

o Do not use the DVD camcorder near TV or radio:

This could cause noise to appear on the TV screen or in radio broadcasts.

x_ English

• Do not use the DVD camcorder near strong radio waves or magnetism:

If the DVD camcorder is used near strong radio waves or magnetism, such as near a radio transmitter or electric appliances, noise could enter video and audio that are being recorded. During playback of normally

recorded video and audio, noise may also be present in picture and sound. At worst, the DVD camcorder could malfunction.

° Do not expose the DVD camcorder to soot or steam:

Thick soot or steam could damage the DVD camcorder case or cause a malfunction.

° Do not use the DVD camcorder near corrosive gas:

tf the DVD camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel

engines, or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling

normal operation, or the battery connecting terminals could corrode, so that power will not turn on.

° Do not expose the DVD camcorder to insecticide:

Insecticide entering the DVD camcorder could dirty the lens in the laser pickup block, and in such a case the DVD camcorder might not operate normally. Turn the DVD camcorder off and cover it with vinyl sheet, etc. before using

insecticide.

• Do not use a 3 !/2 inch(8cm) CD lens cleaner:

- Cleaning the lens is not necessary when using this DVD camcorder in the usual way.

- Using a 3 1/2 inch(8cm) CD tens cleaner could cause this DVD camcorder to malfunction.

° Do not touch the lens in the laser pickup block,

If you touch the lens in the laser pickup biock directly it may cause a malfunction. The laser pickup block is not

warranted for damage caused by misuse. Therefore, pay much attention when operating this camcorder.

• Do not wipe the DVD camcorder body with benzene or a thinner: The coating of exterior could peel off or the case surface could deteriorate.

• Keep the memory card out of reach of children to prevent swallowing.

English jd

INTRODUCTION TO BASIC

FEATURES

GETTING TO KNOW YOUR DVD

CAMCORDER

PREPARATION

DVD CAMCORDER MODE:

BEFORE RECORDING

09 What's included with your DVD camcorder

10 Front and right view 11 Left side and bottom view

12 Rear and top view

13 Remote control (SC-DX105 only) 14 Installing the button-type battery 15 Holding the DVD camcorder 16 Charging the battery pack

21 Basic DVD camcorder operation 22 Screen indicators

26 Using the display (IIDI)button

26 Using the joystick 27 Using the LCD screen 27 Using the viewfinder

28 Initial setting: OSD language & date and time

30 Selecting the storage media (SC-DX103/DX105 only) 30 Inserting and removing a disc

32 Recordable time

02_ English

DVD CAMCORDER MODE:

RECORDING/PLAYBACK

33 Recording movie images on a disc 35 Recording with ease for beginners (EASY.Q mode) 36 Capturing still images during movie image playback

(SC-DX103/DX105 only)

37 Zooming 38 Playing movie images

DVD CAMCORDER MODE:

EDITING MOVIE IMAGE

DVD CAMCORDER MODE:

DISC MANAGE

40 Deleting images 41 Deleting a section of a movie image (partial delete) 42 Playlist

47 Disc finalize 49 Disc unfinalize

50 Disc format 51 Disc information

English 03

ontents

DIGITAL CAMERA MODE

(SC-DX103/DX105 ONLY)

USING THE MENU iTEMS

PRINTING PHOTO iMAGES

(SC-DX103/DX105 ONLY)

52 Inserting and ejecting a memory card 55 Recordabte time and number of images

56 Recording movie images on a memory card 57 Taking photo images

58 Playing movie images 59 Viewing photo images

60 Protection from accidental erasure 61 Deleting images

62 Handling menus 63 Menu items

65 Recording menu items 78 Playback menu item

78 Setting menu items

83 DPOF print setting 84 Direct printing with a PictBridge

04_ English

CONNECTING TO AV DEVICES

CONNECTING TO A PC

(SC-DXl03/DX105 ONLY)

86 Connecting to a TV

88 Dubbing images from the Camcorder to a VCR or DVD/

HDD recorder

89 Using Voice Plus

90 System requirements 91 Installing DV Media PR©

93 Connecting the USB cable

94 Viewing the contents of storage media (memory card)

96 Transferring files on the memory card from the DVD

camcorder to your PC

97 Using the PC cam function

MAINTENANCE &

ADDITIONAL INFORMATION

TROUBLESHOOTING !03 Troubleshooting

SPECIFICATIONS 112

WARRANTY (SEA USERS ONLY)

98 Maintenance 99 Additional information

!02 Using your DVD camcorder abroad

English 05

This chapter introduces the basic features of your DVD camcorder.

See the reference pages below for more information.

charging the Battery pack _page 18

Setting OSD language and the date/time ,-,pages 28-29

Selecting the storage media (DISC and CARD) (SC-DX103/DX105 only) _,page 30

You can record movie and photo images.

- You can take a photo only on the memory card. DVD discs do not support photo mode.

- Refer to pages 52~54 for the supported memory cards before purchasing them.

_When recording movie images on a DVD disc

Select the proper disc for use.

you

Do want to delete edit movie images on the DVD camcorder?

Do yo u want to reuse the disc after formatting ? ....... )

_'_When ,recording for a long

_SS',,_.

)

06_ English

DVD-R !

- DVD+RW, DVD+R DL and DVD-R do not have Video or VR mode selection.

• You can delete the movie image only on a DVD-RW disc (VR mode).

• Selecting the desired disc and disc formatting. _-,pages 30-31

• Recording movie images ',*pages 33-37, 56

• Taking the photo images (SC-DX103/DX105 only) _page 57

Selecting an image to play back from the thumbnail index views _,pages 38, 58-59

Viewing playback from your DVD camcorder on your PC (SC-DX103/DX105

only) or TV _pages 86-89, 96 Editing movie images as your preference (Editing function is available only in

DVD-RW(VR mode)) _,pages 40-46

You must finalize the disc in advance to view the movie images recorded on a DVD camcorder on other

DVD devices. (Finalize is a function that enables a disc recorded on the DVD camcorder to be playable on DVD devices such as DVD players.)

r II I.i::ll,i_ 1

.w w

weemi_lt°_*_t ooe_ o _gt _._wgwt _e_.t, m., _eee f iso_,e_tewme*eem_eeQ_wm_

,.*continued

English _07

The function of the finalized disc depends on the disc type.

Finalized r

DVD'R

Finalized

• You cannot use the following discs.

- 5 inch (12cm) CD/DVD discs

- CD/CD-R/CD-RW/DVD-ROM/DVD+R (Single Layer)/DVD-RAM/DVD-R (Dual Layer), Floppy Disk, MO, MD, iD, LD

° We are not responsible for data loss on a disc.

- We do not warranty any damage or loss incurred due to recording and playback failure caused by disc or card malfunction.

• We take no responsibility and offer no compensation for any recording failure, loss of recorded or edited material and/or damage to the recorder arising from the misuse of discs.

° For stable and perpetual recording and playback, use TDK, MKM, Verbatim discs that have the "_'_,,_P_"

designation, If you do not use them, recording and playback operation may not work properly or you may not be able to eiect the disc from the camcorder.

• The time it takes to finalize a disc may vary depending on the recording time.

• You cannot overwrite, edit, or format a finalized disc. If needed, unfinalize the disc. (DVD-RW only) ',-page 49

• It is not guaranteed that all DVD players!recorders/drives can play discs finalized in this DVD camcorder. For compatibility details, refer to the DVD players/recorders/drives owner's manual.

, For more information about available discs, see page 101.

The finalized DVD disc can be

played on most DVD devices.

You can play back the disc only on a DVD player that supports DVD-RW

discs recorded in VR mode.

(_You can play back the on finalizing )

disc other

"_ _You cannot make more -1

DVD devices without it.

1 recordings, even if the disc|

L.Inas enough space.. ..........j

You can record more after )

08_ English

WHAT'S INCLUDED WITH YOUR DVD CAMCORDER

Your new DVD camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung's Customer Care Center.

O The exact appearance of each item may vary by model.

Battery pack

(IA.BP8OW) ii i

(AD43-OO186A)

: ::User manual Quick start guide

: (AD68-02550A): i (AD68-02561A)

: Remote control : Software CD 31/2 inch(8cm)

AC power adaptor AV cable : USB cable

(AA-E9 type) (AD39'00001A) :(AK39-00095A)

i (AD44-00116A)

Button-type battery(AD43-10130H)

:for internal clock(TYPE: CR2025)

:or remote control(SC-DXl05 only)

(AD59,00155A) (AD46'00097A) I: : i DVD'RW disc(Option)

(SC,DXl05 on y) : (SC-DX103/DX105 only) :: (AD46-00090A)

I_. The contents may vary depending on the sales region.

° Parts and accessories are available at your local Samsung dealer. ° A memory card is not included. See pages 52-53 for memory cards compatible with your DVD camcorder.

(SC-DX103/DX105 only)

• To buy this optional accessory, contact your nearest Samsung dealer. English _09

FRONT AND RIGHT VIEW

CLO§.§J

,®

1_ Lens open/close switch

I_ Lens

(_ Remote sensor (SC-DX105 only) @ Light (SC-DX105 only)

Internal microphone

10 English

I_ Grip belt hook t_ Grip belt

(_ Swivel handle

Disc cover

LEFT AND BOTTOM VIEW

G Display (IC31)button 1_ EASY Q button

Built-in speaker

@ FINALIZE button !_ BATT. (battery release) switch

1_ Storage mode switch (DISC/CARD)

(SC-DX103/DX105 only)

1_ Battery pack (_ LCD screen

(_ Recording start/stop button l_ Joystick (up!down/right/left!Select, W/F) @ MENU button

@ Tripod receptacle @ Memory card slot (SC-DX103/DX105 only)

English 11

REAR AND TOP VIEW

® ®

{_ Viewfinder f_ Zoom (Wf_ lever/Volume control

PHOTO button (SC-DX103/DX105 only)

@ Focus adjustment knob

1_} MODE button / Mode indicator

(Record (_)/Play (!-_-I)mode)

I_ Recording start/stop button [Z} ACCESS/CHG indicator

12_ English

l_ OPEN switch I_ AV jack

I_ USB iack (SC-DX103/DX105 only)

DO IN/USB (SC-DX103/DX105 only) / AV jack cover

I_ DO IN jack

[_ POWER switch

eoaration

This section provides information on using this DVD camcorder; such as how to use the provided accessories, how

to charge the battery, how to setup the operation mode and initial setup,

REMOTE CONTROL (SC-DX105 only)

(_ START/STOP button 1_ DISPLAY button

1_ Skip (e/e) button @ Stop (®) button

I_ Play!Pause (G _)button

l_ MENU button

Control (@/(_/([:)/(})/@) buttons (_ PHOTO button l_ Zoom (VVfT) button

1_ Search ((_/(_) button

Slow playback ((_) button

The buttons on the remote control function

the same as those on DVD camcorder.

English _13

t I

INSTALLING THE BUTTON-TYPE BATTERY

Installation for the internal clock (battery release) switch

1. Open the LCD screen, then slide the BATT. (battery release) switch in the arrow direction to remove the battery pack.

2. Remove the battery cover.

3. insert the button-type battery then place the battery cover back.

Position the button type battery with the positive (+) terminal face out in the button

type battery slot.

Battery installation for the internal clock

The button type batte_, maintains the clock function and preset contents of the memory

: even if the battery pack or AC power adapter is removed.

The button type battery for the DVD camcorder lasts about 6 months under normal

operation from the time of installation. When the button type battery becomes weak or dead, the date/time indicator will display "JAN/01/2008 12:00 AM" when you turn the date and time display on.

Installing the button-type battery in the remote control (SC-DX105 only) 1, Turn the battery holder counterclockwise (as indicated with (®) mark) using your

fingernail or a coin to open it, The battery holder opens.

2, Insert the battery into the battery holder with the positive (+) terminal facing down and

press it firmly until you hear a locking sound.

3. Place the battery holder back in the remote control, matching its (0) mark with the (¢) mark on the remote control, and turn the battery holder clockwise to lock it.

Precautions regarding the button type battery ,, There is a danger of explosion if button type battery is incorrectly replaced. Replace only

with the same or equivalent type.

• Do not pick up the battery using tweezers or other metal tools. This wilt cause a short circuit.

o Do not recharge, disassemble, heat or immerse the battery in water to avoid the risk of

explosion.

L_ s'._IIch

1 _ °

3 ° °I

° ol

wA,._._be swallowed, seek medical attention immediately.

14_ English

Keep the button type battery out of the reach of the children. Should any battery

HOLDING THE DVD CAMCORDER

Attaching the grip belt

insert your right hand from the bottom of the DVD

camcorder up to the base of your thumb.

Put your hand in a position where you can easily

operate the Recording start/stop button,

PHOTO button, and the Zoom lever,

Adjust the length of grip belt so that the DVD camcorder is stable when you press the

Recording start/stop button with your thumb .................

1. Pull and detach the grip belt. Insert the grip belt into its hook as shown in the figure,

2, Insert your hand into the grip belt and adjust its length.

3. Close the grip belt.

Angle Adjustment

Rotate the swivel handle to the most convenient angle.

You can rotate it downwards upto 140 °,

[_ lease be careful not to turn the swivel handle backward as it

may cause damage.

English 15

re r tion

I f

CHARGING THE BATTERY PACK

There are two types of power source that can be connected to your DVD camcorder.

Do not use provided power supply units with other equipment.

- The battery pack: used for outdoor recording.

- The AC power adaptor: used for indoor recording,

To charge the battery pack

Be sure to charge the battery pack before you start using your DVD camcorder.

Attaching the battery pack to the DVD camcorder

1. Open up the LCD screen 90 degrees with your finger.

2. Fit the battery pack to the battery attachment platform and push the battery pack as shown in the figure until a click is heard.

Removing the battery pack from the DVD camcorder

1. Open up the LCD screen 90 degrees with your finger.

2. Slide the BATT. (battery release) switch in the direction as shown in the figure and pull out the battery pack,

insert the battery pack in the accurate direction as shown in the figure.

WA..L_When the battery pack is wrongly inserted, it may cause malfunction of the

DVD camcorder and battery pack.

° It is recommended that you purchase one or more additional battery

packs to allow continuous use of your DVD camcorder,

° Additional battery packs are available at your local Samsung dealer.

• If the DVD camcorder will not be in use for a while, remove the battery from the DVD camcorder.

Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.

Otherwise, there is a danger of overheating, fire or explosion. Samsung is not responsible for problems occurring due to using unapproved

batteries.

16_ English

About battery packs

• The battery pack should be recharged in an environment that is between 0°C (32°F) and 40°C (104°F). However, when it is exposed to cold temperatures (below 0°C (32°F)), its usage time becomes reduced and it

may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a

short time, then re-insert it to the DVD camcorder.

• Do not put the battery pack near any heat source (i.e. fire or a heater).

• Do not disassemble, apply pressure to, or heat the battery pack,

. Do not allow battery pack terminals to be short-circuited. It may cause leakage, heat generation, induce

overheating or fire.

Maintaining the battery pack

• The recording time is affected by temperature and environmental conditions.

• The recording time shortens dramatically in a cold environment. The continuous recording times in the user

manual are measured using a fully charged battery pack at 25°C (77°F). As the environmental temperature and conditions vary, the remaining battery time may differ from the approximate continuous recording times given in

the instructions.

• We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be treated as chemical waste.

• Make sure that the battery pack is fully charged before starting to record.

• When fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage

when fully discharged.

• Remove the battery from the camcorder when it is not in use. Even when the power is switched off, the battery pack will still discharge if it is left attached to the DVD camcorder.

- For power saving purposes, the DVD camcorder enters the sleep mode automatically if no operation is performed for 3 minutes in the STBY mode and thumbnail index view. If no operation is made for 3 more minutes while the

unit is sleep mode, the camcorder turns off automatically. However, if any operation is made, the DVD camcorder comes out of sleep mode, This function works only if "Auto Power Off" is set to "6 Min."_page 80

o Make sure that the battery pack fits firmly into place. Do not drop the batter,i pack as it may cause damage.

About the battery life

Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one,

Each battery's life is affected by storage, operating and environmental conditions.

English _17

Charging the battery pack

• Use the IA-BP80W battery pack only. + The battery pack may be charged a little at the

time of purchase.

1. Slide the POWER switch downwards to turn off the power.

2. Open the LCD screen and attach the battery pack to the DVD camcorder. _,page 16

3. Open the DC INiUSB/AVjack cover.

4. Connect the AC power adaptor to the DC IN jack of your DVD camcorder.

5. Connect the AC power adaptor to a wall socket.

o The ACCESS/CHG (charging) indicator

lights up in orange and charging starts. The

AOOESS/CHG (charging) indicator lights up in

green when the battery is fully charged.

6. Once charged, disconnect the AC power adaptor from the DC IN jack on your DVD camcorder.

Even with the power switched off, the battery pack will still discharge if it is left attached to the DVD camcorder. It is recommended that you remove the battery pack from the DVD camcorder.

POWER

Charging indicator

The color of the ACOESS/OHG (charging) indicator indicates the power or

charging state.

If the battery has been fully charged, the charging indicator is green. If you are charging the battery, the color of the charging indicator is orange. If an error occurs while the battery pack in charging, the charging indicator blinks orange.

18 Engl+sh

Charging, recording and playback times with a fully charged battery pack

(with no zoom operation, etc.)

For your reference, the approximate time with a fully charged battery pack:

50min

Viewfinder

Normal ' Vie r --

The time is only for reference. Figures shown above are measured under Samsung's test environment, and may

differ from your actual use.

The charging time will vary depending on the remaining battery level.

Continuous recording time (without zoom) The times shown in the table reflect the available recording time when the DVD camcorder is in the recording mode without using any other functions. In actual recording, the battery pack may discharge 2-3 times faster than this reference since the record start/stop and zoom are being operated, and playback is performed. Assume that the recordable time with a fully charged battery pack is between 1/2 and 1/3 of the time in the table, so prepare enough

battery packs to allow for the time you are planning to record on the DVD camcorder.

Note that the battery pack discharges faster in a cold environment.

60min

70min

55min

65min

75min

English ._19

Using the DVD camcorder with the AC power adaptor

It is recommended that you use the AC power adaptor to power the DVD camcorder from a household AC outlet

when you perform settings on it, finalize a disc, play back, or edit images, or use it indoors. _,page 18

I_o Be sure to use the provided AC power adaptor to power the DVD camcorder. Using other AC power

adaptors could cause electric shock or result in fire.

The AC power adaptor can be used around the world. An AC plug adaptor is required in some foreign

countries. If you need one, purchase it at your local Samsung dealer.

Before detaching the power source, make sure that the DVD camcorder's power is turned off.

OAUTION

Failure to do so can result in DVD camcorder malfunction.

• Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your DVD camcorder.

• Do not use the AC power adaptor in a narrow space, such as between a wall and furniture.

20 English

+ 94 hidden pages