Samsung HMX-F80BN-XAA User Manual

HMX-F80BN/HMX-F80SN

USER

ANUAL

HMX-F800BN/HMX-F800SN HMX-F810BN/HMX-F810SN

Digital Camcorder

www.samsung.com/register

For video recording, use a memory card that supports faster write speeds.

- Recommended Memory Card: 6MB/s (Class 6) or above.

Important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Warning

To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.

Caution

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachment/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury fromtip-over.

13 Unplug this apparatus during lightning storms or when unused

for long periods of time.

Important safety instructions

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

14 Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the apparatus.

16 VENTILATION:

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register. This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

17 POWER SOURCES:

The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

18 GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third

(grounding) pin. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.

19 POWER-CORD PROTECTION:

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

20 OUTDOOR ANTENNA GROUNDING:

CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and builtup static charges, Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See figure below.

iii

Important safety instructions

21 LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

22 POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

23 OVERLOADING:

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

24 OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25 SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

26 DAMAGE REQUIRING SERVICE:

Unplug this CAMCORDER from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If any liquid has been spilled onto, or objects have fallen into the

CAMCORDER.

c. If the CAMCORDER has been exposed to rain or water.

d. If the CAMCORDER does not operate normally by following the

operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.

e. If the CAMCORDER has been dropped or the cabinet has been

damaged.

f. When the CAMCORDER exhibits a distinct change in

performance, this indicates a need for service.

27 REPLACEMENT PARTS:

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

28 SAFETY CHECK:

Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe operating order.

29 To prevent damage which may result in fire or shock hazard, do

not expose this appliance to rain or moisture.

30 If this power supply is used at 240V ac, a suitable plug adaptor

should be used.

Important safety instructions

USER INSTALLER CAUTION:

Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules.

NOTE:

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE

RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800Samsung (7267864)

CALIFORNIA USA ONLY This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA “Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help and for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This Booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions;

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including

interference that may cause undesired operation.

Before reading this user manual

SAFETY WARNINGS

What the icons and signs in this user manual mean:

Safety Icon Meaning

WARNING

CAUTION

There is a potential risk of death or serious injury.

There is a potential risk of personal injury or damage to the product.

To reduce the risk of fire, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions.

Here are hints or page number references you will find helpful when you operate the camcorder.

Settings required before using a function.

These warning signs are here to prevent injury to you and others. Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

PRECAUTIONS

Warning!

• When using the AC power adaptor with your camcorder, connect the adaptor to an outlet with protective grounding.

• Do not expose the camcorder battery to direct sunlight, heaters, radiators, fire, or any source of excessive heat.

Caution

If you replace the battery with the wrong battery, you can cause an explosion. Replace only with the same battery or an equivalent type.

If you plug the AC power adaptor into a 240V AC outlet, be sure to use a suitable plug adaptor.

IMPORTANT INFORMATION ON USE

About this user manual

Thank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. pages 91~100

This User Manual covers models HMX-F80, HMX-F800, and HMX-F810.

• Illustrations of model HMX-F80 are used in this user manual.

• The displays in this user manual may not be exactly the same as

those you see on the LCD screen.

• Designs and specifications of the camcorder and other accessories are subject to change without notice.

• Before using the camcorder, read the Safety information carefully and then use the product properly.

• Samsung is not responsible for any injury or damage caused by not following the instructions in the user manual.

• In this manual, a ‘memory card’ or ‘card’ means an SD, SDHC, or SDXC memory card.

• In this user manual’s function description tables, the icon shown in the on-screen display column will appear on the screen when you set the corresponding function. Example: 720X480/60p (16:9) - Video Resolution Submenu item  page 53

Item Use

720X480/60p

(16:9)

Records in 720x480 (60p) resolution with 16:9 aspect ratio.

If you set the video resolution to 720X480/60p (16:9), the corresponding icon ( ) will appear on the screen.

On-screen

display

The

following terms are used in t

his manual:

• ‘Scene’referstothepointwhereyoupressthe[Recording start/stop]buttontostartrecordinguntilyoupressitagainto

stoprecording.

• Theterms‘photo’and‘stillimage’areusedinterchangeablywith thesamemeaning.

Beforeusingthiscamcorder

• This camcorder records video in H.264 (MPEG4/AVC) format.

• You can play back and edit the video recorded by the

camcorder on a personal computer using the internal software of this camcorder.

• Please note that this camcorder is not compatible with other digital video formats.

• Before recording important video, make a trial recording. Playbackyourtrialrecordingtomakesurethevideoandaudio havebeenrecordedproperly.

• Recordedcontentsmaybelostduetoamistakewhenhandling thiscamcorderormemorycard,etc.Samsungwillnotprovide compensationfordamagesduetothelossofrecordedcontents.

• Make a backup of important recorded data. Protectyourimportantrecordeddatabycopyingthefilesto aPC.WealsorecommendyoucopyitfromyourPCtoother recordingmediaforstorage.Refertothesoftwareinstallationand USBconnectionguide.

• Copyrights: Please note that this camcorder is intended for individual use only. Datarecordedonthestoragemediainthiscamcorderusing otherdigital/analogmediaordevicesisprotectedbythe CopyrightActandcannotbeusedwithoutpermissionofthe ownerofthecopyright,exceptforpersonalenjoyment.Evenif yourecordaneventsuchasashow,performance,orexhibition forpersonalenjoyment,westronglyrecommendthatyouobtain permissionbeforehand.

Before reading this user manual

• ForOpenSourcelicensesinformation,refertothe ‘Opensource-F80.pdf’intheprovidedCD-ROM.

Notesregardingtrademarks

• Allthetradenamesandregisteredtrademarksmentionedinthis manualorotherdocumentationprovidedwithyourSamsung productaretrademarksorregisteredtrademarksoftheir respectiveholders.Furthermore,‘ eachcaseinthismanual.

• SD,SDHCandSDXClogosaretrademarksofSD-3C,LLC.

• Microsoft

,Windows®,WindowsVista®,Windows®7,and

areeitherregisteredtrademarksortrademarksof

DirectX theMicrosoftCorporationintheUnitedStatesand/orother countries.

,Core™,Core2Duo®,andPentium®aretheregistered

• Intel trademarksortrademarksoftheIntelCorporationintheUnited Statesandothercountries.

• AMDandAthlon™areeitherregisteredtrademarksor trademarksofAMDintheUnitedStatesandothercountries.

• Macintosh,MacOSareeitherregisteredtrademarksor trademarksofAppleInc.intheUnitedStatesand/orother countries.

• YouTubeisatrademarkofGoogleInc.

• FlickrisatrademarkofYahoo.

• FacebookisatrademarkofFacebookInc.

• TwitterisatrademarkofTwitterInc.

• PicasaisatrademarkofGoogleInc.

• Adobe,theAdobelogo,andAdobeAcrobatareeitherregistered trademarksortrademarksofAdobeSystemsIncorporatedinthe UnitedStatesand/orothercountries.

• HDMI,theHDMIlogoandHighDefinitionMultimediaInterfaceare trademarksorregisteredtrademarks ofHDMILicensingLLC.

’and‘®’arenotmentionedin

Safety information

The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions fully.

WARNING

Means that there is a potential risk of serious personal injury.

CAUTION

Means that there is a potential risk of personal injury or damage to the product.

WARNING

Do not overload outlets or extension cords as this may result in abnormal heat or fire.

No oil! Oil entering the camcorder or power adaptor could cause electric shock, malfunctions or defects.

Prohibited action. Do not touch the product.

Do not disassemble the product. Unplug from the power supply. This precaution must be

Using the camcorder at temperatures over 60˚C (140˚F) may result in fire. Keeping the battery at a high temperature may cause an explosion.

LIO

Do not aim the camcorder directly into the sun. Doing so could cause eye injuries, as well as lead to malfunctioning of internal parts of the product.

Do not allow water, metal, or inflammable material to enter the camcorder or power adaptor. Doing so may pose a fire hazard.

Do not bend the USB cable or damage the power adaptor by pressing on it with a heavy object. There is a risk of fire or an electric shock.

followed.

No sand or dust! Fine sand or dust entering the camcorder or power adaptor could cause malfunctions or defects.

Do not disconnect the adaptor by pulling on its USB cable, as this could damage the cable.

Safety information

diulfgninaelc

Do not use the power adaptor if it has damaged, split or broken cords or wires. Doing so may cause fire or electric shock.

Keep the camcorder away from water when using it near the beach or pool or when it rains. There is a risk of a malfunction or an electric shock.

Unplug the power adaptor before you clean it. If you leave it plugged in, there is a risk of a malfunction or an electric shock.

Do not connect the power adaptor unless the plug can be fully inserted with no part of the blades exposed.

Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by a child, consult a physician immediately.

If the camcorder emits an abnormal sound or smell, or smokes, unplug the power adaptor immediately and request service from a Samsung service center. There is a risk of fire or personal injury.

Do not dispose of the battery in a fire as it may explode.

Do not plug or unplug the power adaptor with wet hands. There is a risk of electric shock.

If the camcorder malfunctions, immediately detach the power adaptor or battery from the camcorder. There is a risk of fire or injury.

Never use cleaning fluid or similar chemicals to clean the camcorder. Do not spray cleaners directly on the camcorder.

Keep the power adaptor unplugged when not in use or during lightning storms. There is a risk of fire.

Do not attempt to disassemble, repair, or modify the camcorder or the power adaptor. There is a risk of fire or an electric shock.

CAUTION

Safety information

Do not press the surface of the LCD with force, or hit it with a sharp object. If you push the LCD surface, display unevenness may occur.

Do not leave the camcorder in a closed vehicle for a long time where the temperature is very high.

Do not expose the camcorder to sudden changes in temperature or high humidity. There is also a risk of defect or electric

shock when using outdoors during lightning storms.

Do not drop or expose the camcorder, battery, power adaptor or other accessories to severe vibrations or impact. This may cause a malfunction or injury.

Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.

Do not place the camcorder down on the open LCD screen.

Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.

Do not use the camcorder near dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide. Doing so may corrode the external or internal terminals, disabling normal operation.

Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the case surface could deteriorate.

Do not use the camcorder near direct sunlight or heating equipment. This may cause a malfunction or injury.

EDI CI TC E

SNI

Do not expose the camcorder to insecticide. Insecticide entering the camcorder could cause the product to fail to operate normally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide.

Do not leave the LCD screen open when not using the camcorder.

Safety information

Do not hold the camcorder by the LCD screen when lifting it. The LCD screen could detach and the camcorder may fall.

Place the camcorder on a stable surface that is well ventilated.

Do not use the camcorder near a TV or radio. Interference from the camcorder could cause noise on the TV or in the radio broadcast.

Keep important data separately. Samsung is not responsible for data loss.

Do not use the camcorder near sources of strong radio waves or magnetic fields such as speakers and large motors. Noise from these sources could distort the video or audio you are recording.

Only plug the power adaptor plug into a socket that is easily accessible. If any problem occurs with the product, you must pull the plug out of the socket to disconnect the power completely. Turning off the power button on the product does not turn off the camcorder completely.

Use Samsung-approved accessories only. Using products from other manufacturers may cause overheating, fire, explosion, electric shock or personal injuries caused by abnormal operation.

Other manufacturers of optional accessories compatible with this camcorder are responsible for their own products. Use the optional accessories according to the safety instructions. Samsung is not responsible for any malfunction, risk of fire, electric shock, or damages caused by using unauthorized accessories.

Important safety instructions .............................. ii

Before reading this user manual ....................... 2

SAFETY WARNINGS ..................................................................... 2

PRECAUTIONS ............................................................................. 2

IMPORTANT INFORMATION ON USE ........................................... 2

Safety information ............................................ 4

Quick start guide ........................................... 10

Getting to know the camcorder ...................... 13

WHAT'S INCLUDED WITH YOUR CAMCORDER ........................ 13

LOCATION OF CONTROLS ......................................................... 14

IDENTIFIYING THE SCREEN DISPLAYS ...................................... 16

Getting started .............................................. 19

INSERTING/EJECTING THE BATTERY ........................................ 19

CHARGING THE BATTERY ......................................................... 20

CHECKING THE BATTERY STATE .............................................. 21

Basic operation of the camcorder ................... 24

TURNING YOUR CAMCORDER ON/OFF .................................... 24

SWITCHING TO THE POWER SAVING MODE ............................ 24

SETTING THE DATE/TIME FOR THE FIRST TIME........................ 25

SETTING THE OPERATION MODES ........................................... 26

SWITCHING THE INFORMATION DISPLAY MODE ..................... 26

USING THE SHORTCUT MENU (OK GUIDE) ............................... 27

SELECTING THE LANGUAGES ................................................... 29

Getting ready to start recording ...................... 30

INSERTING AND EJECTING A MEMORY CARD (NOT SUPPLIED)

SELECTING A SUITABLE MEMORY CARD (NOT SUPPLIED) ..... 31

RECORDABLE TIME AND CAPACITY ......................................... 33

ATTACHING THE STRAP ............................................................ 34

ADJUSTING THE LCD SCREEN .................................................. 34

... 30

Basic recording ............................................. 35

RECORDING VIDEOS.................................................................. 35

RECORDING PAUSE/RESUME ................................................... 36

TAGGING AND CAPTURING GREAT MOMENTS WHILE RECORDING (MY CLIP FUNCTION)

RECORDING PHOTOS ................................................................ 38

RECORDING WITH EASE FOR BEGINNERS (SMART AUTO) ...... 39

ZOOMING IN/OUT....................................................................... 40

USING THE BACK LIGHT BUTTON ............................................. 41

................................................................... 37

Basic playback .............................................. 42

CHANGING THE PLAYBACK MODE ........................................... 42

PLAYING BACK VIDEOS ............................................................. 43

PLAYING BACK MY CLIP ............................................................ 45

USING THE SMART BGM FUNCTION ......................................... 45

TAGGING AND CAPTURING GREAT MOMENTS WHILE PLAYING

BACK VIDEO ............................................................................... 46

VIEWING PHOTOS ...................................................................... 47

ZOOMING DURING PHOTO PLAYBACK..................................... 48

Using the menu items .................................... 49

HANDLING MENUS .................................................................... 49

MENU ITEMS .............................................................................. 50

Contents

Advanced recording ...................................... 52

iSCENE ....................................................................................... 52

Video Resolution .......................................................................... 53

Photo Resolution ......................................................................... 54

White Balance ............................................................................. 54

Face Detection ............................................................................ 56

EV (Exposure Value) .................................................................... 57

C.Nite .......................................................................................... 58

Focus .......................................................................................... 58

Anti-Shake(HDIS) ......................................................................... 60

Digital Special Effect .................................................................... 61

Zoom Type .................................................................................. 62

Cont. Shot ................................................................................... 63

Time Lapse REC ......................................................................... 64

Guideline ..................................................................................... 66

Advanced playback ....................................... 67

Thumbnail View Option ................................................................ 67

PlayOption .................................................................................. 68

Smart BGM Option ...................................................................... 68

Delete .......................................................................................... 70

Delete My Clip ............................................................................. 71

Protect ........................................................................................ 72

Slide Show .................................................................................. 73

File Info ........................................................................................ 73

Other settings ................................................ 74

Storage Info ................................................................................. 74

File No. ........................................................................................ 74

Date/Time Set ............................................................................. 75

Date/Time Display ....................................................................... 75

LCD Brightness ........................................................................... 76

Auto LCD Off ............................................................................... 76

Beep Sound ................................................................................ 77

Shutter Sound ............................................................................. 77

Auto Power Off ............................................................................ 78

PC Software ................................................................................ 78

Format ......................................................................................... 79

Default Set ................................................................................... 79

Language .................................................................................... 79

Connecting to a TV ........................................ 80

CONNECTING TO A HIGH DEFINITION TV WITH HDMI .............. 80

CONNECTING TO A REGULAR TV ............................................. 81

VIEWING ON A TV SCREEN ........................................................ 82

Dubbing videos ............................................. 83

DUBBING TO VCR OR DVD/HDD RECORDERS ......................... 83

Using with a windows computer ..................... 84

WHAT YOU CAN DO WITH A WINDOWS COMPUTER ............... 84

USING THE Intelli-studio PROGRAM ........................................... 85

USING AS A REMOVABLE STORAGE DEVICE ........................... 89

Troubleshooting ............................................. 91

WARNING INDICATORS AND MESSAGES ................................. 91

SYMPTOMS AND SOLUTIONS ................................................... 94

Maintenance & additional information ............ 101

MAINTENANCE ......................................................................... 101

USING YOUR CAMCORDER ABROAD ..................................... 102

GLOSSARY ............................................................................... 103

Specifications .............................................. 104

Quick start guide

CARD

This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information.

STEP 1: Get ready

Insert the battery into the battery slot. ¬page 19

Charge the battery fully. ¬page 20

Insert a memory card. ¬page 30

STEP 2: Record videos and photos

Open the LCD screen and press the [Power ( )] button to turn

on the camcorder.

•

Set the [Lens cover open/close] switch to open (

page 15

To record videos, press the [Recording start/stop] button or,

to record photos, press the [PHOTO] button. ¬pages 35, 38

[Recording

start/stop]

button

CARD

[Recording

start/stop]

button

Quick start guide

STEP 3: Play back videos or photos

Viewing videos or photos on the LCD screen

You can find recordings quickly by using the thumbnail view.

Press the [MODE] button to select the playback ( ) mode.

Select the video or photo thumbnail view by using the [Zoom]

lever.

Use the [Control (Up/Down/Left/Right)] button to select a

desired video or photo, and then press the [Control (OK)] button.

Normal

0:00:55

Photo Move Play

1/10

Viewing on a TV

You can enjoy detailed, brilliant quality videos on a connected TV.

pages 80~82

C A R D

STEP 4: Save recorded videos / photos

Using the Intelli-studio program built in to your camcorder, you can import videos and photos into your computer and edit or share the videos and photos with your friends and family. For details, see pages 85~88.

CARD

Quick start guide

Importing and viewing videos/photos to your PC from the camcorder

Start the Intelli-studio program by connecting the camcorder to

your PC with a USB cable.

•

A new file saving screen appears with the Intelli-studio main window. Click Yes, and the uploading procedure starts.

Any new files are saved to your PC and registered to

Contents Manager in the Intelli-studio program.

•

You can arrange the files by different criteria such as Face, Date, Location, etc.

Saved files in your PCContents Manager

Folders directory on your PC

Double-click the file you would like to play back.

Sharing videos/photos on Web sites

Share your contents with the world by uploading photos and videos directly to a web site with a single click. Click the Share (

page 88

Intelli-studio runs automatically when you connect the camcorder to a Windows computer (if you have set PC Software: On). ¬ page 78

) p Upload tab on the Intelli-studio browser.

STEP 5: Delete videos or photos

If the camcorder’s storage media is full, you cannot record new videos or photos. Delete videos or photos you have saved to your computer from the camcorder’s storage media. Then you can record new videos or photos on newly freed up space.

[MODE] button p Playback ( ) mode p [MENU] button p Delete ¬page 70

Getting to know the camcorder

WHAT'S INCLUDED WITH YOUR CAMCORDER

Your new camcorder comes with the accessories shown on this page. If any of these items is missing from your box, call Samsung’s Customer Care Center.

Model name Color Internal memory Lens

HMX-F80BN HMX-F800BN HMX-F810BN

HMX-F80SN HMX-F800SN HMX-F810SN

• Although the models have some features that are different, they operate in the same way.

• The exact appearance of each item may vary by model.

• The contents may vary depending on the sales region.

• You can purchase parts and accessories after consulting with your

local Samsung dealer. SAMSUNG is not responsible for reduced battery life time or malfunctions caused by any unauthorized use of accessories such as the power adaptor or the batteries.

• A memory card is not included. See page 31 for memory cards compatible with your camcorder.

• Your camcorder includes the user manual CD and the printed quick start guide.

Black -

Sliver -

52x (Optical),

65x (Intelli),

130x (Digital)

Check your accessories

Battery

(IA-BP105R: AD43-00201A) (IA-BP210R: AD43-00200A)

Audio/Video cable

(AD39-00184A)

Optional accessories

Micro HDMI cable

(AD39-00179A)

External battery charger

(IA-BC9UA4)

Memory card adaptor

Power adaptor

(AD44-00196A)

User manual CD

(AD46-00429A)

Carrying case

(AD69-00929A)

Memory card/

USB cable

(AD39-00169A)

Quick start guide

(AD68-06902A)

Memory card

LOCATION OF CONTROLS

Front & Left

5 6

CARD

ⓑ

ⓐ

8 9 10 11 12

ⓓ

ⓔ

ⓒ

Getting to know the camcorder

Lens

MENU button

Control (Up/Down/Left/Right/OK) button /

Zoom (T/W) button

Recording start/stop button

LCD screen

Memory card/Jack cover

USB jack (

ⓐ

Memory card slot (

ⓑ

AV jack (

ⓒ

CHG (charging) indicator

ⓓ

HDMI jack (

ⓔ

Internal speaker

Display ( ) button

Recording pause/resume ( ) button

Back light ( ) button / SMART BGM button

SMART AUTO ( ) button

Power ( ) button

)

Getting to know the camcorder

Right/Top & Bottom

4 5

MODE button

Zoom lever (T/W)

PHOTO / My Clip button

Strap

Strap hook

Lens cover open ( ) /close ( ) switch

Internal microphone

Battery release switch (BATT.)

Tripod receptacle

Rear

Mode indicator

: Recording mode (Video/Photo) : Playback mode

Recording start/stop button

Battery slot

Be careful not to cover the internal microphone and lens during recording.

Getting to know the camcorder

IDENTIFIYING THE SCREEN DISPLAYS

The available functions vary depending on the selected operation mode. Different indicators appear depending on the setting values.

•

The On Screen Display (OSD) below appears when the camcorder is in the recording ( ) mode only.

•

Press the [MODE] button to select the recording (

Video and Photo recording mode

1/60 +0.3

JAN/01/2012 12:00AM

This camcorder provides one combined

• video and photo recording mode. You can easily record videos or photos in the same mode without having to change it.

The on-screen indicators are based on a 16GB

• SDHC memory card. The settings of functions marked with a are

• lost when the camcorder turns off. For enhanced performance, the display

• indications and their order are subject to change without prior notice. The total number of recordable photos is based

• on the available space on the storage media. The maximum number the photo counter can

• display is 9,999.

[220Min]0:00:00STBY

99991 Sec/ 24 Hr

Left of the LCD screen

JAN/01/2012 12:00AM

) mode. ¬page 26

Indicator Meaning

Recording mode (Video/Photo)

STBY

/ z / /

0:00:00 [220Min]

9999

Operating status (standby/ recording/pause/photo capturing) Time counter (video recording time, remaining recordable time)

iSCENE / Smart Auto

Time Lapse REC

My Clip

Photo image counter (total number of recordable photos)

White Balance

Manual focus

C.Nite

1/60

EV (Exposure Value)

+0.3

Zoom (optical zoom / intelli zoom / digital zoom)

Digital Special Effect

Date/Time Display

Right of the LCD screen

Indicator Meaning

Storage media (memory card)

Battery info. (remaining battery level)

Photo Resolution, Video Resolution

Anti-Shake (HDIS)

Back light

Continuous shot

Face Detection

•

The On Screen Display (OSD) below appears in the video playback ( ) mode only.

•

Press the [MODE] button to select the playback (

) mode. ¬page 26

Video playback mode: Thumbnail view

Normal

0:00:55

Photo Move Play

1/10

Top of the LCD screen

Thumbnail View

100-0001

Top of the LCD screen

Indicator Meaning

/ / / /

0:00:00/0:00:55

Video playback mode

Storage media (memory card)

Battery info (remaining battery level)

Button guide

Video playback mode

Playback status (playback/pause/ search/skip)

Time code (elapsed time / recorded time)

Storage media (memory card)

Battery info (remaining battery level)

PlayOption

Video Resolution

Getting to know the camcorder

Center of the LCD screen

Indicator Meaning

0:00:55

Indicator Meaning

Bottom of the LCD screen

Indicator Meaning

100-0001

Recorded time

Current video / total number of

1/10

recorded videos

Protect

My Clip

Error file

Scroll bar

My Clip

Protect

Shortcut menu

Button guide

File name (file number)

•

This On Screen Display (OSD) below appears in the photo playback ( ) mode only.

•

Press the [MODE] button to select the playback (

Photo playback mode: Thumbnail view

Normal

Movie

Move

Photo playback mode: Single view

1/10

Thumbnail View

Play

100-0001

1/10

) mode. ¬page 26

Top of the LCD screen

Indicator Meaning

Photo playback mode

Storage media (memory card)

Battery info (remaining battery level)

Bottom of the LCD screen

Indicator Meaning

Button guide

Top of the LCD screen

Indicator Meaning

Photo playback mode

Slide Show

Current photo / total number of

1/10

recorded photos

Storage media (memory card)

Battery info (remaining battery level)

Photo Resolution

Getting to know the camcorder

Center of the LCD screen

Indicator Meaning

Bottom of the LCD screen

Indicator Meaning

100-0001

Current photo / total number of

1/10

recorded photos Protect Error file

Scroll bar

Protect

Shortcut menu

Button guide

File name (file number)

Getting started

INSERTING/EJECTING THE BATTERY

To insert the battery

Insert the battery into the battery slot until it softly clicks.

•

Make sure that the SAMSUNG logo on the battery is facing you when the camcorder is placed as shown in the figure.

Use only Samsung-approved batteries. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire, or explosion.

• Samsung is not responsible for the problems caused by unapproved batteries.

• Remove the battery from the camcorder when the camcorder is not in use.

• We recommend you purchase one or more additional batteries to allow continuous use of your camcorder.

•

To eject the battery

Gently push the [Battery release (BATT.)] switch in the direction

shown in the figure to eject the battery.

Push down, and then lift the battery out in the direction shown in

the figure.

[Battery release (BATT.)] switch

CHARGING THE BATTERY

You can charge the battery with the USB cable and power adaptor.

Make sure that you use the supplied USB cable or power adapter to charge the battery. If you use any other power adapter for the camcorder, it will not work properly or the battery may not be charged. It may also cause an electric shock or result in a fire.

To charge the battery with the power adaptor

CARD

To charge the battery by connecting to a PC

CARD

Getting started

Insert the battery into the camcorder. ¬page 19

Open the jack cover of the camcorder.

Charge the battery using the USB cable and power adaptor.

•

The CHG (charge) indicator lights up and charging starts. When the battery is fully charged, the charging (CHG) indicator turns green. ¬page 21

Charging the battery at low temperature may take longer or the

• battery may not charge fully (The green indicator will not turn on). Make sure that there are no foreign substances on the plug or in the

• socket when you connect the power adaptor to the camcorder. When using the power adaptor, place it close to the wall outlet. If

• you experience a malfunction while using the camcorder, separate the power adaptor immediately from the wall outlet. Do not use the power adaptor in a tight space, such as between

• furnishings.

•

Make sure to turn off the camcorder before disconnecting the power adaptor. Otherwise, you can damage the storage media or data.

When recording indoors with a wall outlet available, it is convenient to use

• the power adaptor instead of the battery. We recommend you charge the battery in a place with an ambient

• temperature between 50˚F and 86˚F (10°C~30°C). If the camcorder is turned on, the battery will still charge, but more

• charging time will be needed. We recommend you keep the camcorder turned off while it charges. You cannot operate the camcorder using USB power only. Use the

• power adaptor or battery to power the camcorder. If you use the camcorder while you are charging the battery, charging

• may take longer.

•

An AC plug adaptor is required in some foreign countries. If you need one, purchase it from your distributor.

Getting started

CHECKING THE BATTERY STATE

You can check the charging state and remaining battery capacity.

To check the charging state

The color of the CHG lamp indicates the charging state.

CARD

Charging (CHG) lamp

Charging

state

LED color

Charging Fully charged Error

(Orange)

(Green)

(Orange blink)

Battery level display

The battery level display shows the amount of battery power remaining in the battery.

[220Min]STBY

9999

Battery Level

Indicator

Exhausted (flickers): The device will soon turn off.

Charge the battery as soon as possible.

- The device will be forced to turn off after 3 seconds.

The figures above are based on a fully charged battery at normal temperature. Low ambient temperature may affect the use time.

State Message

Fully charged -

75%~50% -

50%~25% -

25%~5% -

less than 5% -

Low

battery

Getting started

Available charging and running time for the battery

Battery Type IA-BP105R IA-BP210R

Charging time

Charging time: Approximate time in minutes required to fully charge a completely exhausted battery.

• Recording/Playback time: Approximate time available when you have fully charged the battery.

• The time is only for reference. Times shown above are measured under Samsung’s test conditions. Your times may differ, depending on

• your usage and conditions. The recording and playback times will be shorter when you use your camcorder in low temperatures.

• We recommend using the power adaptor when using the Time Lapse REC function.

•

To charge the battery with the power adaptor

To charge the battery by connecting to a PC

Resolution

Continuous recording time

Playback time

approx. 100 min. approx. 80 min. approx. 200 min. approx. 160 min.

approx. 160 min. approx. 300 min.

HD SD HD SD

approx. 200 min. approx. 400 min.

Continuous Recording (without zoom)

The continuous recording time shows the available recording time when you record without using any other function after recording starts. The battery may discharge 1.5 times faster than this reference if you use the record start/stop, the zoom, and the playback functions. Prepare additional batteries with the expectation that the actual recording time is about 60% of the times listed above.

Using an AC power source

We recommend that you use the power adaptor to power the camcorder from a household AC outlet when recording and playing back the camcorder indoors. The connection is the same as that for battery charging. ¬page 20

The charging time will vary depending on the amount of charge left in

• the battery. Depending on your PC specifications, the charging time can be

• prolonged.

About the battery

Battery properties

•

A lithium-ion battery is small-sized and has a high capacity. Low

ambient temperature (below 50ºF (10ºC)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder.

Make sure to store the battery separately after use.

•

- A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.

- The battery may be completely discharged, if it has been installed and left in the camcorder for a long period of time. If this occurs, the battery may not fully operate even if you charge it.

- If the battery is not used for a long time, fully charge the battery and then, using your camcorder, drain the charge completely. Do this once every 3 months to keep the battery functioning properly. To store the battery, remove it from your camcorder and put it in a cool, dry place.

Charge an extra battery before using the camcorder

• outdoors in cold temperatures.

- The cold temperature may shorten the length of time you can

use the battery before needing to recharge it.

- Carry the supplied USB cable and power adaptor to charge

the battery while travelling.

Getting started

Check whether the battery terminal is damaged if the battery

• falls or is dropped.

- If you install a battery with the damaged terminal into the

camcorder, you can damage the camcorder.

Remove the battery and the memory card from the

• camcorder and disconnect the power adaptor after use.

- Store the battery in a stable, cool, and dry place.

(Recommended temperature : 59ºF~77ºF (15ºC~25ºC), recommended humidity: 40%~60%)

- Temperatures that are too high or too low shorten the battery

lifetime.

- The battery terminals can become rusty or malfunction if the

battery is stored in a smoky or dusty location.

Recycle or dispose of your dead batteries properly.

•

The battery lifetime is limited.

•

- Battery capacity decreases over time and through repeated

use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one.

- Each battery’s life is affected by storage, and operating and

environmental conditions.

Basic operation of the camcorder

TURNING YOUR CAMCORDER ON/OFF

Open the LCD screen and press the [Power ( )] button to turn

on the camcorder.

•

Set the [Lens cover open/close] switch to open (

To turn off the camcorder, press the [Power ( )] button.

LCD screen

The camcorder operates the self-diagnosis function when powered on. If a warning message appears, refer to ‘warning indicators and messages’ (¬pages 91~93) and take corrective action.

When using this camcorder for the first time

When you use your camcorder for the first time or reset it, the Date/ Time Set screen appears at start-up. Set the date and time. ¬page 25

Power( ) button

SWITCHING TO THE POWER SAVING MODE

If you need to use camcorder for the extended time, the following functions enable you to prevent unnecessary energy consumption.

Sleep mode

The camcorder switches to the sleep mode when the LCD screen is closed, and then, if idle for more than 20 minutes, the camcorder turns off. However, if Auto Power Off: 5 Min is set, the camcorder turns off in 5 minutes. If you open the LCD screen during sleep mode, the sleep mode ends and the camcorder returns to the last operation mode used.

LCD screen is closed

The power saving mode does not work in the following situations:

•

- While recording, playing back, or displaying a slide show.

- When the LCD screen is opened.

•

The camcorder consumes less battery power in the power saving mode. However, if you plan to use the camcorder for an extended time, we recommend you turn off the camcorder by pressing the

)] button when not using it.

[Power (

After 20 minutes

Basic operation of the camcorder

SETTING THE DATE/TIME FOR THE FIRST TIME

You can set the date and time of your local area when you turn on this camcorder for the first time.

Open the LCD screen and press

the [Power ( the camcorder.

•

The Date/Time Set screen appears.

Select the date and time

information, and change the setting values by using the [Control (Up/Down/Left/Right)] button.

Make sure the clock is correctly set, and then press the [Control

(OK)] button.

The year can be set up to 2037.

• Set Date/Time Display to On. ¬page 75

• After setting, the date and time are automatically recorded on a

• special data area of the storage media.

)] button to turn on

Date/Time Set

Month

JAN

YearDay Hr Min

2012 12 00 AM

Move OK

Internal rechargeable battery

Your camcorder includes a internal rechargeable battery that retains the

• date and time settings even after the power is turned off. Once this battery is depleted, the current date/time values are all reset

• to defaults, and you need to recharge the internal rechargeable battery. The date/time must be set again.

Charging the internal rechargeable battery

The internal battery is always recharged while your camcorder is

• connected to the power adaptor or while the battery is attached. If you do not connect the camcorder to power adaptor or do not attach

• the battery for about 48 hours, the internal battery fully discharges. If this occurs, charge the internal battery by connecting to the supplied USB cable and power adaptor for 12 hours.

Basic operation of the camcorder

SETTING THE OPERATION MODES

You can switch the operation mode in the following order each time you press the [MODE] button.

Recording mode (

Each time the operation mode changes, the respective mode

• indicator light turns on.

Mode Indicator Functions

Recording

mode

Playback

mode

This camcorder provides one recording mode for both video and photo recordings. You can easily record videos or photos in the same mode without having to switch modes.

) Q Playback mode ( )

To record videos or photos.

To play back videos or photos.

SWITCHING THE INFORMATION DISPLAY MODE

You can switch the on-screen information display mode.

Press the [Display (

The full and minimum display modes will alternate.

•

Warning indicators and messages may appear depending on the

• recording conditions. In the menu screen, the [Display ( )] button will be deactivated.

•

)] button.

[220Min]STBY

9999

STBY

+ 81 hidden pages