Samsung Galaxy Buds+ Black User manual

0 (0)

USER MANUAL

SM-R175

English (EU). 05/2020. Rev.1.1

www.samsung.com

Table of Contents

Basics

3Read me first

4About the Galaxy Buds+

5Device layout and functions

8Preparing the earbuds for use

10Battery

16Battery indicator lights identification

Galaxy Wearable App

34Introduction

35Connecting and disconnecting the earbuds

36Viewing Galaxy Buds+ status and customising settings

Using the earbuds

18Connecting the earbuds to a mobile device

24Wearing the earbuds

25Using the touchpad

28Using Bixby

29Listening to music

30Using the equaliser

31Using call features

32Using ambient sound mode

Appendix

39 Troubleshooting

42Updating the earbuds’software with the Galaxy Buds Manager on your computer

43Managing the Galaxy Buds+

45Restarting the earbuds

45Coupling the earbuds

46Removing the battery

Basics

Read me first

Please read this manual before using this device to ensure safe and proper use.

•Descriptions are based on the device’s default settings.

•Some content may differ from your device depending on the region, model specifications, or device’s software. Images may differ in appearance from the actual product. Content is subject to change without prior notice.

•Before using other mobile devices, make sure they are compatible with the device. Visit www.samsung.com to see the specifications of compatible mobile devices.

•Be careful to not get the device wet while using it. The device could malfunction if it is damaged by water. Do not wear the device during activities, such as showering or swimming. Doing so can damage the device.

•Modifying the device’s operating system or installing softwares from unofficial sources may result in device malfunctions and data corruption or loss. These actions are violations of your Samsung licence agreement and will void your warranty.

•Some functions may not work as described in this manual depending on the maker and model of the mobile device you connect to the device.

•This product includes certain free/open source software. To see the instructions for viewing the open source licence, go to the Samsung website (opensource.samsung.com).

Instructional icons

Warning: situations that could cause injury to yourself or others

Caution: situations that could cause damage to your device or other equipment

Notice: notes, usage tips, or additional information

Basics

About the Galaxy Buds+

Galaxy Buds+ are wireless earbuds which allow you to listen to music or answer incoming calls after connecting them to your device even while doing other activities, such as working out.

Do not wear the earbuds in high-traffic areas, such as roads or crosswalks. Doing so may result in accidents due to slowed reaction times.

Basics

Device layout and functions

Package contents

Refer to the quick start guide for package contents.

•The items supplied with the Galaxy Buds+, available accessories, and their images may vary depending on the region.

•The supplied items are designed only for the Galaxy Buds+ and may not be compatible with other devices.

•Appearances and specifications are subject to change without prior notice.

•You can purchase additional accessories from the Samsung website. Make sure they are compatible with the models before purchase.

•Use only Samsung-approved accessories. Using unapproved accessories may cause the performance problems and malfunctions that are not covered by the warranty.

•Availability of all accessories is subject to change depending entirely on manufacturing companies. For more information about available accessories, refer to the Samsung website.

Device layout

Earbud

Microphone	Wing tip
Touchpad	Charging contact
	Charging contact
Microphone	Touch-sensitive sensor
	Touch-sensitive sensor

Charging contact

Ear tip

If you use the earbuds when they are broken, there may be a risk of injury. Use the earbuds only after they have been repaired at a Samsung Service Centre.

If foreign materials are placed on the touch-sensitive sensor, they may cause the sensor to malfunction. Before wearing the earbuds, clean the sensor first.

Basics

Wing tip

Direction indicator

Basics

Charging case

Charger port (USB Type-C)

Earbud battery indicator light

Charging contacts (left)

Charging case battery indicator light

Charging contacts

(right)

•If there is sweat or liquid on the charging contacts, corrosion may occur on the Galaxy Buds+. When there is sweat or liquid on the charging contacts or earbuds, clean them before inserting the earbuds in the charging case.

•Close the charging case when you store or charge the earbuds.

Basics

Preparing the earbuds for use

Attaching an ear tip to the earbud

Select the ear tip that fits your ear.

Cover the latch at the bottom of the earbud with the ear tip.

•	Do not put the earbuds in your ears without ear tips. Doing so may hurt your ears.
•	Do not pull the ear tip excessively when you attach or detach it. The ear tip may
	tear.

3 Follow the same procedure for the opposite earbud.

Basics

Attaching a wing tip to the earbud

1	Select the wing tip that fits your ear.
2	Select the wing tip for the left or right ear.
3	Hook the wing tip’s groove to earbud’s fixation hook and cover the earbud with the wing
	tip.

• Do not put the earbuds in your ears without wing tips. Doing so may hurt your ears.

•Do not pull the wing tip excessively when you attach or detach it. The wing tip may tear.

Do not put the wing tips on the earbuds in the wrong direction. The earbuds will not fit in your ears properly.

4 Follow the same procedure for the opposite earbud.

Basics

Battery

Charging the battery

Fully charge the battery before using the earbuds for the first time or when they have been unused for extended periods. The earbuds will power on while charging. When you charge the battery for the first time or when the battery is completely discharged, it needs at least 10 minutes to start to work.

Check the direction of each earbud, insert them into the corresponding slots, and then connect the charger.

The charging case, which has a built-in battery, is charged along with the earbuds that are in the charging case when connected to the charger.

You can charge the earbuds by placing them into the charging case that has been already charged.

Use only Samsung-approved chargers and cables. Unapproved chargers or cables can cause the battery to explode or damage the Galaxy Buds+.

• Connecting the charger improperly may cause serious damage to the charging case. Any damage caused by misuse is not covered by the warranty.

•Use only USB Type-C cable supplied with the device. The charging case may be damaged if you use Micro USB cable.

•Chargers are sold separately.

•To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging.

•You cannot use your earbuds’wireless features while charging the earbuds’ batteries.

•Close the charging case when you store or charge the earbuds.

•Do not put the wing tips on the earbuds in the wrong direction. The earbuds will not be charged if they are not properly inserted into the charging case.

Basics

Open the charging case.

Check the direction of each earbud and correctly insert them into their corresponding slots in the charging case.

Close the charging case.

Connect the USB cable to the charger and then plug the USB cable into the charger port.

Connecting the USB cable improperly may cause serious damage to the charging case. Any damage caused by misuse is not covered by the warranty.

5 Plug the charger into an electric socket.

The batteries of the earbuds and the charging case are charged simultaneously.

6 After fully charging, disconnect the charging case from the charger. First unplug the USB cable from the charging case and then unplug the charger from the electric socket.

Basics

Reducing the battery consumption

When you are not using the earbuds, store them in the charged charging case. The touchsensitive sensor will continue to work while wearing the earbuds and reduce the usage time.

Battery charging tips and precautions

•Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric current.

•While charging, the Galaxy Buds+ and the charger may heat up. This is normal and should not affect the Galaxy Buds+’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging. If this occurs during wireless charging, disconnect the Galaxy Buds+ from the charger to let them cool down, then charge the Galaxy Buds+ again later.

•If you charge the Galaxy Buds+ while the charger port is wet, the Galaxy Buds+ may be damaged. Thoroughly dry the charger port before charging the Galaxy Buds+.

•If the Galaxy Buds+ are not charging properly, take the Galaxy Buds+ and the charger to a Samsung Service Centre.

•Avoid bending the USB cable. Doing so may damage or reduce the lifespan of the USB cable. Never use a damaged USB cable.

Basics

Wireless charging

The charging case has a built-in wireless charging coil. You can charge the battery by using a wireless charger or another device that functions as a wireless charger.

Charging the battery with a wireless charger

Open the charging case.

Check the direction of each earbud and correctly insert them into their corresponding slots in the charging case.

Close the charging case.

Place the centre of the charging case’s back on the centre of the wireless charger.

5 After fully charging, disconnect the charging case from the wireless charger.

Precautions for wireless charging

Do not place the charging case on the wireless charger when conductive materials, such as metal objects and magnets, are placed between the charging case and the wireless charger.

The Galaxy Buds+ may not charge properly or may overheat, or the charging case may be damaged.

Use Samsung-approved wireless chargers. If you use other wireless chargers, the battery may not charge properly.

Basics

Charging the battery using Wireless PowerShare

Open the charging case.

Check the direction of each earbud and correctly insert them into their corresponding slots in the charging case.

Close the charging case.

Place the centre of the charging case’s back on the device that functions as a wireless charger.

The location of the wireless charging coil may vary by device. Adjust the device and the charging case to make a strong connection.

The device that functions as a wireless charger

Basics

5 After fully charging, disconnect the charging case from the device that functions as a wireless charger.

•To charge properly, do not move or use either the device that functions as a wireless charger or the charging case while charging.

•The power charged to the Galaxy Buds+ may be less than the amount shared to them by the device that functions as a wireless charger.

•If you charge the Galaxy Buds+ while charging the device that functions as a wireless charger, the charging speed may decrease or the Galaxy Buds+ may not charge properly, depending on the charger type.

•The charging speed or efficiency may vary depending on the device’s condition or the surrounding environment.

•If the remaining battery power of the device that functions as a wireless charger drops below a certain level, power sharing will stop.

Checking the battery level

Connect the earbuds to your mobile device, launch the Galaxy Wearable app on your mobile device, and view the battery status of each earbud and the charging case. Refer to Connecting the earbuds to a mobile device for more information.

When the remaining battery level is low, a notification will appear on the mobile device’s notification panel.

+ 32 hidden pages