Samsung EJFT810 User Manual

QUICK
START
GUIDE

EJ-FT810
Galaxy Tab S2 BOOK COVER

KEYBOARD

Printed in Korea

GH68-44138A Rev.1.0

E Type 04/2015

Charging the battery

Before using the keyboard for the first time, you must charge the
battery.

Connect the keyboard to a charger.

•

Chargers are sold separately.

•

The charger should remain close to the electric socket
and easily accessible while charging.

•

The socket-outlet shall be installed near the equipment
and shall be easily accessible.

Turning the keyboard on and off

Slide the Power switch to turn on or off the keyboard.

When you turn on the keyboard for the first time, it
automatically enters Bluetooth pairing mode.

Connecting devices via Bluetooth

1. Turn on the keyboard, and then press and hold the (F11 or
F12) key for about three seconds to enter Bluetooth pairing

mode.
The notification light will flash red, green, and blue.

2. On your other device, activate the Bluetooth feature and tap
Samsung Tab S2 Keyboard from the list of available devices.

3. On the keyboard, enter the passkey displayed on your other
device’s screen and press the Enter key.

The keyboard can pair with up to two Bluetooth-enabled
devices and you can easily switch connections between
the paired devices. For more information, refer to the
user manual.

3