Samsung BN68-01464D-00 User Manual
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
EIRE 0818 717 100 www.samsung.com/ie
U.K 0845 SAMSUNG (7267864) www.samsung.com
Customer Care Centre
Web Site
LCD TV
user manual
BN68-01464D-00
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and t the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a still image.
•
W
caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
•
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
atching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 2
Installing the Stand ............................................. 2
Installing the Wall Mount Kit ............................... 2
Viewing the Control Panel .................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control ............................... 7
Installing Batteries in the Remote Control .......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Viewing the Menus ............................................. 9
Using the TOOLS Button .................................... 9
Plug & Play ....................................................... 10
SETTING THE CHANNELS
Storing Channels Automatically ........................11
Storing Channels Manually .............................. 12
Adding / Locking Channels .............................. 13
Sorting the Stored Channels ............................ 14
Assigning Channels Names ............................. 14
Fine Tuning Channel Reception ....................... 15
LNA (Low Noise Amplier) ............................... 15
SETTING THE PICTURE
Changing the Picture Standard ........................ 16
Adjusting the Custom Picture ........................... 17
Conguring Detailed Settings on the Picture ... 17
Resetting the Picture Settings to the
Factory Defaults ...............................................
Changing the Picture Options .......................... 19
SETTING THE SOUND
Sound Features ................................................ 21
Selecting the Sound Mode ............................... 22
Connecting Headphones (Sold separately) ..... 22
SETTING THE TIME
Setting and Displaying the Current Time .......... 23
Setting the Sleep Timer .................................... 23
Switching the Television On and Off
Automatically ....................................................
FUNCTION DESCRIPTION
Choosing Your Language ................................. 24
Melody / Entertainment / Energy Saving ......... 25
Selecting the Source ........................................ 26
Editing the Input Source Names ...................... 27
Symbol Press Note One-Touch
18
24
Button
English - 1
USING THE DTV FEATURE
Previewing the DTV Menu System .................. 28
Updating the Channel List Automatically .......... 29
Updating the Channel List Manually ................ 29
Editing Your Favourite Channels ...................... 30
Selecting Channel List ..................................... 32
Displaying Programme Information .................. 32
Viewing the EPG (Electronic Programme
Guide) Information ...........................................
Using the Scheduled List ................................. 34
Setting the Default Guide ................................. 34
Viewing All Channels and Favourite Channels
Adjusting the Menu Transparency .................... 35
Setting up the Parental Lock ............................ 36
Setting the Subtitle ........................................... 37
Setting the Subtitle Mode ................................. 37
Selecting the Audio Format .............................. 37
Selecting the Audio Description ....................... 38
Selecting the Digital Text ................................. 38
Selecting the Time Zone (Spain only) .............. 39
Viewing Product Information ............................ 39
Checking the Signal Information ...................... 40
Upgrading the Software ................................... 40
Viewing Common Interface .............................. 41
Selecting the CI (Common Interface) Menu ..... 41
Resetting ......................................................... 42
Selecting the Preferred Language
(Subtitle,
Preference ........................................................... 43
Audio or Teletext) ..............................
33
.... 35
42
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ..................................
Display Modes .................................................. 44
Setting up the TV with your PC ........................ 45
ABOUT ANYNET
What is Anynet+? ............................................ 46
Connecting Anynet+ Devices ........................... 46
Setting Up Anynet
Scanning and Switching between Anynet+
Devices ............................................................
Recording ......................................................... 50
Listening through a Receiver ........................... 50
Check Points before Requesting Service ......... 51
+
+ ..........................................
44
47
48
RECOMMENDATIONS FOR USE
Teletext Feature ............................................... 52
Wall-Mount Adjustment (Sold separately)
(depending on the model) ................................ 54
Using the Anti-Theft Kensington Lock
(depending on the model) ................................ 55
Troubleshooting: Before Contacting
Service Personnel ............................................ 56
Technical and Environmental Specications ... 57
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control
& Batteries
(AAA x 2)
➣
Registration Cards (Not available in all locations)
➣
The stand and stand screw may not be included depending on the model.
Power Cord Cover-Bottom
Owner’s Instructions Registration Cards
Stand Screw
X 4
Installing the Stand
2
1
Stand Cleaning Cloth
1. Connect your LCD TV and the stand.
Two or more people should carry the TV.
➣
Make sure to distinguish between the front and back of the stand when assembling them.
➣
2
. Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
➣
down, it may lean to one side.
The stand is installed for models with the screen size of 37 inch and above.
➣
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury due to electric shock.
Remove the stand and cover the bottom hole with a
➣
cap and fasten with two screws.
English - 2
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Side Panel buttons
1
2
3
4
55 6
1 SOURCE
Toggles between all the available input
sources (TV, Ext.1, Ext. 2, AV, S-Video,
Component, PC, HDMI1, HDMI2, HDMI3,
DTV). In the on-screen menu, use this button
as you use the ENTER
remote control.
2 MENU
Press
features.
3
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the ◄ and ► buttons on
the remote control.
4
Press to change channels. In the on-screen
to see an on-screen menu of your TV’s
menu, use the buttons as you use
the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
button on the
English - 3
5 Speakers
(Power)
6
Press to turn the TV on and off.
Remote Control Sensor
Aim
the remote control towards this spot on
the TV.
Power Indicator
Blinks
lights up in stand-by mode.
and turns off when the power is on and
Viewing the Connection Panel
[TV Rear Panel]
2 3 54 61
Power Input
!@
The product colour and shape may vary depending on the model.
➣
[TV Side Panel]
7
3
8
9
0
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
➣
➣
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2 COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
-
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to
-
the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
-
The P
R, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
R", "PB", "Y") on your set.
and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
-
to corresponding audio out connectors on the DTV or DVD.
English - 4
3 HDMI IN 1, HDMI IN 2, HDMI IN 3
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
-
No additional Audio connection is needed for an HDMI to HDMI connection.
-
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
What is HDMI?
➣
“High Denition Multimedia interface” allows the transmission of high denition digital video data
-
and multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
-
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN(HDMI2) [R-AUDIO-L]
-
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
➣
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
4 AUDIO OUT [R-AUDIO-L]
-
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
480i 480p 576i 576p 720p 1080i
X X X O O O
X O X X O O
O O O O O O
to corresponding audio in connectors on the Amplier or DVD Home Theatre.
5 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
6 SERVICE
Connector for SERVICE only.
-
-
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
7 COMMON INTERFACE Slot
-
When CI Card isn’t inserted in some channels, "Scrambled
Signal" is displayed on the screen.
-
The pairing information containing a telephone number, CI
Card ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please
contact your service provider.
-
When the channel information conguration has nished, the
message "Updating Completed" is displayed, indicating that
the channel list is now updated.
➣
You must obtain a CI Card from a local cable service provider.
Remove the CI Card by carefully pulling it out with your hands since dropping the CI Card may
cause damage to it.
➣
Insert the CI-Card in the direction marked on it.
➣
The place of the COMMON INTERFACE Slot may be different depending on its model.
English - 5
8 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
-
Camcorder.
Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
-
out connectors on the A/V device.
9 Headphones jack
-
Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
0 Kensington Lock (depending on the model)
The Kensington lock (optional) is a device used to physically x the system when used in a public
-
place.
If you want to use a locking device, contact the dealer where you purchased the TV.
-
The location of the kensington lock may be different depending on its model.
-
! DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
-
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
➣
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.
@ EXT 1, EXT 2
Connector
EXT 1
EXT 2
Video Audio (L/R) RGB Video + Audio (L/R)
O O O
O O
Input Output
Only TV or DTV output is available.
Output you can choose.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
English - 6
TOOLS
Viewing the Remote Control
1 Television Standby button
2 Selects
mode directly
3 Number buttons for direct
channel
4
selection
5 +: Volume increase
6 Temporary sound switch-off
7 Electronic
(EPG) display
8 Use to quickly select
9 Use
the current broadcast
0 Colour buttons :
Use these buttons in the
@
#
$ Available source selection
% Previous channel
^ P
P
& Displays the main on-screen
* Displays the Channel List on
( Returns
menu
) Control
menu
the TV and DTV
access
One/Two-digit channel
: Volume decrease
Program Guide
frequently used functions.
to see information on
Channel list, etc.
Press to select the optional
display and sound modes for
sports, cinema and games.
Use these buttons in the
DMA, and Anynet+.
(
: This remote can be
used to control recording on
Samsung recorders with the
Anynet+ feature)
: Next channel
: Previous channel
menu
screen
to the previous
the cursor in the
a Exit the on-screen menu
b Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.(The DMA button is
optional.)
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
+
“Anynet
(HDMI-CEC)" is “On”
(see page 47)
c Picture size selection
d Digital subtitle display
e Selects the HDMI mode
directly.
Teletext Functions
2 Exit from the teletext display
7 Teletext store
8 Teletext size selection
9 Teletext reveal
0 Fastext topic selection
! Alternately
Double, or Mix.
$ T
eletext mode selection
(LIST/FLOF)
% Teletext sub page
^ P
P
& Teletext index
( Teletext hold
a Teletext cancel
select Teletext,
: Teletext next page
: Teletext previous page
The performance of the remote control may be affected by bright light.
➣
English - 7
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
➣
diagram inside the compartment.
3
. Replace the cover.
➣
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
If the remote control doesn’t work, check the following:
➣
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug
2. Press
3.
4. To switch your set off, press the POWER button again.
the mains lead into an appropriate socket.
The standby indicator lights up on your set.
➣
the button on your set.
You also can press the POWER
➣
the TV on.
The channel that you were watching last is reselected automatically.
➣
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the
➣
menus are to be displayed.
button or the TV/DTV button on the remote control to turn
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press
2. T
channel up/down ( / ) button again.
the POWER button on the remote control.
➣
The screen is turned off and a red standby indicator appears on your set.
o switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
➣
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial.
English - 8
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER
menu.
3
. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about
one minute.
button to access the icon’s sub-
Using the TOOLS Button
You can use the TOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending on
which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2
. Press the ▲ or ▼ button to select a menu.
3
. Press the ▲/▼/◄/►/ENTER
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
• Anynet+ (HDMI-CEC), see page 47
• Picture Mode, see page 16
• Sound Mode, see page 21
• Sleep Timer, see page 23
• SRS TS XT, see page 21
• Energy Saving, see page 26
• Dual l-ll, see page 22
• Auto Adjustment, see page 45
buttons to display, change, or
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness 50
Colour
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Enter Exit
Picture
50
Tools
English - 9
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some countries.
1. Press
The message "Start Plug & Play
. Select the appropriate language by pressing the
2
Press the
3
. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER
the POWER button on the remote control.
." is displayed with "OK" selected.
▲
ENTER
button to confirm your choice.
or ▼ button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds
4
. The message "Check antenna input." is displayed with "OK" selected.
Press
the
ENTER
Please check that the antenna cable is connected correctly.
button.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the
6
. The message “Some DTV functions may not be available. Digital Scan?” is displayed.
ENTER
button to confirm your choice.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER
Yes
:
First an Analogue TV search is performed and then a Digital TV ch. auto search is performed.
No:
Only an Analogue TV search is performed.
This function is supported for all countries except for the following countries: France, Germany,
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
7
.
The "Auto Store" menu is displayed with the "Start" selected. Press the
The channel search will start and end automatically.
ENTER button.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER
For detailed descriptions about DTV channel update, refer to page 29 of this manual.
button at any time to interrupt the memorization process.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER
Select
the "Month", "Day", "Year", "Hour", or
Set the "Month", "Day", "Year", "Hour", or
You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on
button.
"Min" by pressing the
"Min" by pressing the
◄
▲
or ▼ button.
the remote control.
Plug & Play
Start Plug & Play.
button.
or ► button.
OK
Enter
button.
English - 10
9. Press the ENTER
When you have finished, press the ENTER
Even if the ENTER
several seconds.
Language
Country
: Select your country.
Auto Store
Clock Set
button to confirm your setting. The message “Enjoy your viewing” is displayed.
button is not pressed, the message will automatically disappear after
: Select your language.
: Automatically scans for and stores channels available in the local area.
: Sets the current time for the TV clock.
button.
If you want to reset this feature...
1. Press
the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup" then press the
ENTER button.
2. Press the
ENTER
For further details on setting up options, refer to the page 10.
The “Plug & Play” feature is only available in the TV mode.
➣
button again, to select "Plug & Play".
TV
Plug & Play
Language : English
Time
Melody : Off
Entertainment
Energy Saving : Off
Move Enter Return
Setup
: Off
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country).
Automatically allocated programme numbers may not correspond
to actual or desired programme numbers. However, you can sort
numbers manually and clear any channels you do not wish to
watch.
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine T
LNA : Off
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2
. Press the
3
. Select the appropriate country by pressing the
Press the ENTER
➣
button.
ENTER
button to select "Country".
▲
button to confirm your choice.
or ▼ button.
Even though you have changed the country setting in this menu, the country setting for DTV is
Move Enter Return
not changed. (Refer to page 29)
▲
4
. Press the
5
. Press the
➣
➣
6
. After all the available channels are stored, the "Sort" menu appears. (refer to page
or ▼ button to select "Auto Store", then press the ENTER
ENTER
button.
The TV will begin memorizing all of the available channels.
Press the ENTER
"Channel" menu.
button at any time to interrupt the memorization process and return to the
Channel
une
button.
14)
English - 11
Storing Channels Manually
Not available in DTV or external input mode.
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Channel
to identify.
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2
. Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER
3
. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER
4
. When you are satisfied with your setting, press the
ENTER
Press the EXIT button to exit.
5
.
button.
button.
button.
button.
Move Enter Return
TV
Programme : P 1
Colour System : Auto
Sound System : BG
Channel : S 6
Search : 140 MHz
Store : ?
Manual Store
Move Enter Return
♦ Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
♦ Colour
System: Auto/PAL/SECAM/NTSC4.43
− Press the ▲ or ▼ button to select the required colour standard.
♦ Sound
System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
♦ Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
tuner scans the frequency range until the first channel or the channel that you selected is
− The
received on the screen.
♦ Store (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENTER
button.
Channel mode
− P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
− C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
− S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 12
Adding / Locking Channels
Not available in DTV or external input mode.
➣
Using the Channel Manager, you can conveniently lock or add
channels.
1. Press
Press the ▲ or ▼ button to select "Channel", then press the
2
. Press the
then press the ENTER
♦
3. Select "Channel List" by pressing the ENTER
4
. Move to the (
♦ Locking channels
5. Press the
the ENTER
6
. Select "On" by pressing the ▲ or ▼ button, then press the
7
. Press the
then press the ENTER
8
. Move to the "
9. Press
the MENU button to display the menu.
ENTER
button.
▲
or ▼ button to select "Channel Manager",
button.
Adding channels
the Channel List, you can add channels.
Using
button.
) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER
➣
button to add the channel.
If you press the ENTER
next to the channel disappears and the channel is not
button again, the (
) symbol
added.
"
" is active when "Child Lock" is selected to "On".
➣
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
▲
or ▼ button to select "Child Lock", then press
button.
ENTER
button.
▲
or ▼ button to select "Channel List",
button.
" field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
If you press the ENTER
➣
next to the channel disappears and the channel lock is
button again, the (
) symbol
cancelled.
A blue screen is displayed when "Child Lock" is activated.
➣
the EXIT button to exit.
➣
Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on "
" to be active or inactive.
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Channel List
Child Lock : Off
Move Enter Return
P 1 C3
Prog.
0 C--
1 C
3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add Lock
Move
Page Return
Channel
Channel Manager
Channel List
Enter
1 / 10
You can select these options by simply pressing the CH LIST
button on the remote control.
English - 13
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
Not available in DTV or external input mode.
➣
Press the MENU button to display the menu.
1.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2
. Press the
ENTER
3
. Select the channel number that you wish to change by
pressing the
Press the ENTER
➣
button.
▲
or ▼ button to select "Sort", then press the
button.
▲
or ▼ button repeatedly.
button.
The selected channel number and name are moved to
right side.
4
. Press the
would like to change and then press the ENTER
5
. Repeat steps 3 to 4 for another channel to be sorted.
▲
or ▼ button to move to the position in which you
button.
6. Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
Not available in DTV or external input mode.
➣
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
2
. Press the
ENTER
3
. If necessary, select the channel to be assigned to a new
name
button.
➣
4
.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
➣
5. Repeat
6. Press the
button.
▲
or ▼ button to select "Name", then press the
button.
by pressing the ▲ or ▼ button. Press the ENTER
The selection bar is displayed around the name box.
Then...
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the ENTER
button
The following characters are available: Letters of the alphabet (A~Z) / Numbers
(0~9) / Special characters (+, -, *, /, space)
steps 3 to 4 for each channel to be assigned to a new name.
EXIT button to exit.
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Prog. Ch. Name
C-- -----
0
1 C23 -----
2 S06 ---- 3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 -----
Move Enter Return
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine T
LNA : Off
Move Enter Return
TV
Prog. Ch. Name
0
1 C23 -----
2 S0
3 S07 ---- 4 S09 ---- 5 S12 ---- 6 S13 ---- 7 S14 ---- 8 S17 ---- 9 C21 -----
Move Enter Return
Channel
Sort
Channel
une
Name
C-- -----
6 -----
English - 14
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
Not available in DTV or external input mode.
➣
the number buttons to directly select the channel that
1. Use
you want to fine tune.
2. Press the
Press the ▲ or ▼ button to select "Channel", then press the
ENTER
3
. Press the
the ENTER
4
. Press the
Press the ENTER
5
. Press the EXIT button to exit.
➣
MENU button to display the menu.
button.
▲
or ▼ button to select "Fine Tune", then press
button.
◄
or ► button to adjust the fine tuning.
button.
Fine tuned channels that have been saved are marked
with an asterisk "
number in the channel banner. And the channel number
" on the right-hand side of the channel
*
turns red.
To reset the ne-tuning, select "Reset" by pressing the
➣
▲
or ▼ button and then press the ENTER
button.
LNA (Low Noise Amplier)
If the TV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplifier boosts
the incoming signal).
➣
Not available in DTV or external input mode.
1. Press
Press the ▲ or ▼ button to select "Channel", then press the
2
. Press the
ENTER
3
. Press the
Press the ENTER
4
. Press the
the MENU button to display the menu.
ENTER
button.
▲
or ▼ button to select "LNA", then press the
button.
▲
or ▼ button to select "Off" or "On".
button.
EXIT button to exit.
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
P 1
Adjust Save Return
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Country : United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Channel
Fine Tune
Reset
Channel
Channel
0
Off
On
English - 15
Move Enter Return
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press
Press the ENTER
2
. Press the ENTER
3
. Press the
Press the ENTER
4
. Press the
the MENU button to display the menu.
▲
button, to select "Picture".
button again, to select "Mode".
or ▼ button to select the desired picture effect.
button.
EXIT button to exit.
♦ Dynamic: Selects the picture for high-definition in a bright
room.
♦ Standard: Selects
♦ Movie: Selects
dark room.
the picture for optimum display in a
normal environment.
the picture for comfortable display in a
The Picture mode must be adjusted separately for each
input source.
TV
Mode : Standard
Backlight
Contrast 95
Brightness 45
Sharpness 50
Colour
Tint G 50 R 50
Detailed Settings
Picture Options
Reset
Move Enter Return
TV
Mode : Standard
Backlight
Contrast 95
Brightness 45
Sharpness 50
Colour
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
Picture
50
: OK
Picture
50
7
Dynamic
7
Standard
Movie
Easy Setting
1. Press
the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Picture Mode".
3. Press the ◄ or ► button to select the required option.
4. Press the
EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode ◄ Standard ►
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l-ll : Mono
Move Adjust Exit
English - 16
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. T
o select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 16)
2. Press the
ENTER
3
. Press the
a particular item. Press the ENTER
4
. Press the EXIT button to exit.
▲
or ▼ button to select a particular item. Press the
button.
◄
or ► button to decrease or increase the value of
button.
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
♦ Contrast: Adjusts
the lightness and darkness between
objects and the background.
♦ B
rightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts
the outline of objects to either
sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or
darker
♦ Tint:
Adjusts the colour of objects, making them more red or
.
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch)
In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18)
TV
Mode : Standard
Backlight 7
Contrast 95
Brightness 45
Sharpness
Colour
Tint G 50 R 50
Detailed Settings
Picture Options
Reset
Move Enter Return
▲
Backlight
▼
Move Adjust Return
Picture
50
50
: OK
7
Conguring Detailed Settings on the Picture
You can set detailed picture settings.
1. Press the MENU button to display the menu.
Press the ENTER
Press the ENTER
2.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENTER
3
. Press
press the
4. Select
the ▲ or ▼ button to select "Detailed Settings", then
ENTER
the required option by pressing the ▲ or ▼ button,
then press the
button, to select "Picture".
button to select “Mode”.
button.
button.
ENTER
button.
5. When you are satisfied with your setting, press the
ENTER
button.
6. Press the EXIT button to exit.
"Detailed Settings" is available in "Standard" or "Movie"
➣
mode.
In PC mode, you can only make changes to
➣
“Dynamic Contrast”, “Gamma” and “White Balance” from
among the “Detailed Settings” items.
English - 17
TV
Mode : Standard
Backlight
Contrast 95
Brightness 45
Sharpness 50
Colour
Tint G 50 R 50
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
TV
Black Adjust : Off
Dynamic Contrast
Gamma : 0
Colour Space
White Balance
Flesh Tone : 0
Edge Enhancement : On
Move Enter Return
Picture
7
50
Detailed Settings
: Medium
: Native
Loading...