Sagem PHOTO EASY 160 User Guide

PDG PHOTO EASY 160.fm Page 1 Jeudi, 21. avril 2005 3:30 15

SAGEM

PHOTO EASY 160

User guide

Livret d’utilisation

Bedienungsanleitung

Manual del usuario

Manuale dell'utente

Gebruiksaanwijzing

Manual do utilizador

Date en cours : 21 avril 2005 C:\Documents and Settings\G097447\Bureau\LU AZUR 251 985 569 A PHOTO EASY 160 6 langues\Co uvertures\PDG P HOTO EA SY 160.fm

Notes.fm Page 100 Mercredi, 29. septembre 2004 10:40 10

Liasse AZUR_GB.book Page I Jeudi, 21. a vril 2005 4:09 16

1WELCOME 1

2DISCOVER YOUR PHOTO PRINTER 3

3USER INTERFACE 4

4PREPARE YOUR PHOTO PRINTER 6

Connect the mains supply 6 First ribbon installation 7 To change the ribbon 8 Loading paper 10

5PRINTING FROM A MEMORY CARD 12

Insert a memory card 12 Print your photographs 14 Rapid printing 14 Example of rapid printing from a memory card 15 Create a contact sheet (index) 17 Prepare a series of photographs for printing (print basket function) 18 Print in DPOF (Digital Print Order Format) mode 21

6PRINTING FROM A DIGITAL CAMERA (PICTBRIDGE MODE) 22

Printing in PictBridge mode 23

7PRINTING FROM A MOBILE PHONE OR

OTHER PERIPHERAL DEVICE 24

Infrared transfer 24 Bluetooth transfer (optional) 26

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

8FUNCTION CRYSTAL IMAGE 28

Activation/deactivation 28

9PRINTING FROM A PC 29

10 PROCESSING THE CONTENT OF THE MEMORY CARD

FROM YOUR PC 31

11 REPLACEMENT OF CONSUMABLES 33

- I -

NEDERLANDSPORTUGUÊS

Liasse AZUR_GB.book Page II Jeudi, 21. avr il 2005 4:09 16

12 MAINTENANCE 34

Cleaning the print head 34 Paper jam 35 Problems 36 Error messages 38 Technical data 40

13 ENVIRONMENT 41

14 GUARANTEE 42

- II -

Liasse AZUR_GB.book Page 1 Jeudi, 21. avril 2005 4:09 16

1WELCOME

Thank you for purchasing our new photo printer. With this high quality printer you can get the most out of your digital photos. In a few simple steps you can produce photo prints identical to those from a professional developer, for your personal use or to share with friends and family.

Your photo printer has slots for all types of memory card and hooks up directly to digital cameras. Its Crystal Image picture optimisation guarantees perfect printing and reproduction quality for your photos. With Crystal Image, you can also correct red-eye on photos taken with a flash.

This user guide takes you in easy steps through:

• Setting up your photo printer.

• Printing photos from a flash card.

• Printing from a digital camera.

• Printing photos transferred from a mobile phone or other device.

• Installing the image processing software and print driver on your PC.

• Keeping your photo printer in good working order and solving any problems.

The CD-ROM included with your kit contains an additional guide with instructions for using the image processing software and printer driver on your PC.

You can also find at the www.sagem.com website:

• software upgrades.

• answers to Frequently-Asked Questions (FAQ).

• a list of compatible devices.

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

- 1 -

NEDERLANDSPORTUGUÊS

Liasse AZUR_GB.book Page 2 Jeudi, 21. avril 2005 4:09 16

Safety instructions and recommendations

• Do not install your photo printer in a humid room (bathroom, laundry, kitchen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be operated within an ambient temperature range of 10 °C to 35 °C. Your printer should be used at an ambient temperature of between 15°C and 35°C for optimum printing results.

• Do not set up your printer in a dusty environment as dust deposits might adversely affect the print quality of your photos.

• Only the power supply provided with the printer should be used. Connect this to the mains in accordance with the installation instructions in this user guide and the information on the identification label affixed to the power supply (voltage, current, mains frequency). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible.

• Never open the cover of the film cartridge compartment during printing. This could break the film and cause printer malfunction.

• Only use SAGEM consumables, if not you are likely to damage the equipment and invalidate the guarantee. To obtain the references of the consumables (Refer to paragraph Replacement of consumables, page -33).

• The CE marking certifies that the product meets the main requirements of the European Parliament and Council directive 1999/5/CE on telecommunications terminal equipment, regarding safety and health of users, and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.sagem.com category "support", or can be requested at the following address:

E - Customer relations department

4 rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE

- 2 -

EASY

Liasse AZUR_GB.book Page 3 Jeudi, 21. avril 2005 4:09 16

2DISCOVER YOUR PHOTO PRINTER

Place the box in front of you, open the packaging and check that you have received the items listed below:

1. Photo printer.

2. User manual.

3. CD-ROM.

4. Ink ribbon*(consumable).

5. Photo paper* (consumable).

6. Paper tray.

7. Power supply unit.

8. Mains cable.

GEM

O EASY 155 T

PHO

e id u

r g e

io t

tilisa

t i

e l

n vr i

a L

ario u

nung

u l

e d

ll'utent

ing

wijz

a a M

sa k i

bru

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

depending on model

NEDERLANDSPORTUGUÊS

- 3 -

Liasse AZUR_GB.book Page 4 Jeudi, 21. avril 2005 4:09 16

3USER INTERFACE

Keypad description

1. On/Off button (press and hold).

2. Last photo selection button.

3. Next photo selection button.

4. Number of copies to print button.

5. Photo format button.

6. Print button.

7. Cancel button (C).

8. Print basket button.

9. Crystal Image button (Automatic print quality enhancement and red-eye correction).

- 4 -

Liasse AZUR_GB.book Page 5 Jeudi, 21. avril 2005 4:09 16

Display description

2 3

ENGLISH

FRANÇAIS

The following information is available on screen:

1. Number of the selected photo.

2. DPOF mode.

3. Presence of the selected photo in the print basket.

4. Number of copies to be printed.

5. Crystal Image function icon.

6. Print format.

7. Red-eye correction function icon.

8. Ribbon error.

9. Paper error.

10. Consumable card icon (smart card).

11. Timer icon that flashes during printer activity.

12. Print basket function.

13. Number of the sheet to be printed.

DEUTSCH

ESPAÑOL

ITALIANO

NEDERLANDSPORTUGUÊS

- 5 -

Liasse AZUR_GB.book Page 6 Jeudi, 21. avril 2005 4:09 16

4PREPARE YOUR PHOTO PRINTER

CONNECT THE MAINS SUPPLY

Remark : When installing your printer near a wall or some other object, keep an open space of at

least 4 inches at the back of the printer, to make sure the movement of the sheet of paper being printed is not obstructed.

 Please refer to the safety instructions at the beginning of this user guide

before making any connections.

 Insert one end of the mains lead into the corresponding socket of the power

supply.

 Connect the power supply to the printer as shown in the illustration below.

 Plug the other end of the power supply mains lead into a wall socket.

 Press and hold the On/Off button [x] on the top panel of the printer until three

dashes appear on screen.

 Your printer has two USB connectors:

- a SCSI Mass storage master USB connector (A) for connecting a camera (PictBridge mode), USB key or Bluetooth adapter...,

- a slave USB connector (B) for connecting to a master terminal (such as a PC)

Remark : To obtain the list of devices compatible with this USB port (A), visit the site

www.sagem.com.

- 6 -

Liasse AZUR_GB.book Page 7 Jeudi, 21. avril 2005 4:09 16

FIRST RIBBON INSTALLATION

Remark : Use manufacturer consumables only. These are specially designed to provide opti-

mum print quality (see Chapter 10).

Remark : Smart card validation is not necessary for the use of consumables supplied with the

printer (nature of supplies dependent on the model).

Switch on the printer. Wait 10 seconds for the printhead to lift, then:

1. Open the external flap located on the right-hand side of the printer.

2. Remove the protective foam.

3. Take the new ribbon out of its packaging and make sure that the film is stretched after removing the card (A).

4. Install the ribbon in the position shown in the illustration below.

5. Insert the ribbon so that it is firmly seated in its housing. The locking catch must be closed after insertion.

6. Close the external flap.

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

Warning :

Remark : In the event of any difficulty, check that there are no foreign objects in the film car-

Never touch the film cartridge with your fingers. Make sure the cartridge is completely inserted into the printer. Check that the green locking lever is correctly lowered.

tridge compartment.

- 7 -

NEDERLANDSPORTUGUÊS

Liasse AZUR_GB.book Page 8 Jeudi, 21. avril 2005 4:09 16

TO CHANGE THE RIBBON

Remark : Use manufacturer consumables only. These are specially designed to provide optimum

print quality.

Switch on the printer. Wait 10 seconds for the printhead to lift, then:

1. Take the smart card supplied with the ribbon and photo paper and insert it in

the reader on the printer's left-hand side. The smart card is recognised and read by the printer, and once the procedure is complete the wording: "40 End" or "120 End" appears on screen.

2. Remove the SIM card.

3. Take the new ribbon out of its packaging and make sure that the film is

stretched after removing the card (A).

4. Open the external flap located on the right-hand side of the printer.

5. Lift the locking lever and remove the used ink ribbon.

6. Install the ribbon in the position shown in the illustration below.

7. Lift the locking lever and push in the film cartridge until it touches the back of

the compartment the locking lever must be locked after insertion.

8. Close the external flap.

Remark : If the ribbon is replaced during a print job, you can resume printing where you left off

by pressing the button.

- 8 -

Liasse AZUR_GB.book Page 9 Jeudi, 21. avril 2005 4:09 16

7 8

ENGLISH

FRANÇAIS

DEUTSCH

Warning :

Never touch the film cartridge with your fingers. Make sure the cartridge is completely inserted into the printer. Check that the green locking lever is correctly lowered.

Remark : In the event of any difficulty, check that there are no foreign objects in the film car-

tridge compartment.

- 9 -

ESPAÑOL

ITALIANO

NEDERLANDSPORTUGUÊS

Liasse AZUR_GB.book Page 10 Jeudi, 21. avril 2005 4:09 16

LOADING PAPER

1. Pull the paper tray out of the printer.

2. Open a pack of paper with the protection sheet on the top, insert it in the paper tray, making sure the rectangle reserved for postage stamps is on the outside of the tray, that is, towards you.

3. Remove the protection sheet.

4. Line up the tray with its compartment and push it in slowly until the locking system clicks.

Protection sheet

Warning :

Your photo printer is now ready to print your digital photographs.

handle paper sheets by their pre-cut edges, never allow your fingers to come into contact with the shiny surface before printing.

- 10 -

Liasse AZUR_GB.book Page 11 Jeudi, 21. avril 2005 4:09 16

Warning : protect consumable items against prolonged exposure to light, humidly, heat and

dust. Respect the operation conditions set out (Refer to paragraph Technical data, page -40). Use only the manufacturer consumables designed for this printer. The paper tray should never contain more than 20 sheets at any one time.

Warning : Make sure that a previously printed photograph has not been slipped inadvertently

into a packet of blank pages; this could damage the ribbon of your printer.

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

- 11 -

ITALIANO

NEDERLANDSPORTUGUÊS

+ 32 hidden pages