MORPHOACCESS
TM
Installation Guide
MA1xx series
MorphoAccessTM 100/110/120 November 2005
SK 0000034370 - 01
2
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000034370-01
SK-0000034370-01 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
3
CONTENTS
INTRODUCTION 5
SAFETY INSTRUCTIONS 6
GENERAL DESCRIPTION 7
INSTALLATION PROCEDURE 10
STAGE 1 : DRILLING THE CHASSIS MOUNTING HOLES 10
STAGE 2 : CABLE ENTRY HOLE LOCATION AND CHASSIS FIXATION 11
STAGE 3 : CONNECTING THE COVER ASSEMBLY TO THE CHASSIS 12
STAGE 4: CLOSING MORPHOACCESS™ 13
ELECTRICAL INTERFACE 14
TERMINAL BLOCK BOARD WIRING 14
POWER SUPPLY CABLE 16
WIEGAND OUTPUT WIRING 16
DATA CLOCK OUTPUT WIRING 17
COM RS485 SERIAL PORT 17
ETHERNET WIRING 18
OUTPUT RELAY 19
TAMPER SWITCH 19
USER INTERFACE 20
RECOMMENDATIONS 21
APPENDIX 1 - FINGERPRINT PLACEMENT RULES 23
APPENDIX 2 - BIBLIOGRAPHY 24
APPENDIX 3 - DRILLING TEMPLATE 25
4
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000034370-01
SK-0000034370-01 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
5
IINNTTRROODDUUCCTTIIOONN
Congratulations for choosing the SAGEM MorphoAccess™1 Automatic
Fingerprint Recognition Terminal. MorphoAccess™ provides an innovative
and effective solution for access control applications using Fingerprint
Verification or/ and Identification.
Among a range of alternative biometric techniques, the use of finger
imaging has significant advantages : each finger constitutes an unalterable
physical signature which develops before birth and is preserved until
death. Unlike DNA, a finger image is unique to each individual - even
identical twins.
The MorphoAccess™ terminal integrates SAGEM image processing
and feature matching algorithms (MorphoSoft™ and MorphoImaging™).
This technology is based on lessons learned during more than 20 years of
experience in the field of biometric identification and the creation of literally
millions of individual fingerprint identification records.
We believe you will find the SAGEM MorphoAccess™ fast, accurate, easy
to use and suitable for physical access control.
The SAGEM MorphoAccess™ offers the following advantages:
• High quality optical sensor.
• Supports multiple input/output interfaces used in the physical
access control industry.
• Local area network interface for easy interaction with other host
systems.
• Very compact size for easy installation and integration into your
available office space.
• Open architecture, with dedicated applications implemented via
MA1xx Software Development Kit.
To ensure the most effective use of your SAGEM MorphoAccess™, we
recommend that you read this Installation Guide totally.
1
The SAGEM logo and trademark are the property of SAGEM Défense Sécurité.
All other trademarks or product names are trademarks or product names of the respective title
holders.
6
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000034370-01
SSAAFFEETTYY IINNSSTTRRUUCCTTIIOONNSS
The installation of this product should be made by a qualified service
Person and should conform to all local codes.
It is strongly recommended to use a class II power supply at 12 V ±5% and
0.5 A. min according with Safety Electrical Low Voltage (SELV). The 12 V
power supply cable length should not exceed 5 meters.
This product is intended to be installed with a power supply conformed to
EN60950, in accordance with the NEC Class 2 requirements ; or supplied
by a listed EN60950 external Power Unit marked Class 2 , Limited Power
source, or LPS and rated 12 V DC, 0.5 A minimum.
In case of building to building connection it is recommended to connect 0V
to ground. Ground cable must be connected with the terminal block 0V
GND.
Europe information’s : SAGEM hereby declares that the SAGEM
MorphoAccess™ has been tested and found compliant with the below
listed standards as required by the EMC Directive 89/336/EEC: EN55022
(1994) / EN55024 (1998) , EN300-330 (1999) and by the low voltage
Directive 73/23/EEC amended by 93/68/EEC: EN60950 (2000).
USA information’s : This equipment has been tested and found
compliant with Class B digital device requirements, pursuant to part 15 of
the FCC Rules. These requirements are designed to ensure reasonable
protection against harmful RF interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
interfere with radio communications. If this equipment interferes with radio
or television reception - which can be determined by disconnecting and reconnecting the unit – the user is encouraged to try to correct the
interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SK-0000034370-01 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
7
GGEENNEERRAALL DDEESSCCRRIIPPTTIIOONN
Contactless Card reade
r
( depending of the versions)
Optical Senso
r
Cable entry
Mounting keyholes
Tamper switch
Power supply cable
Trap door
Terminal Block
8
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000034370-01
MorphoAccess™ supplies :
1 Cover assembly 1 Chassis
1 Trap door 2 screws for cover fixation
1 secured screwdriver Torx 20 1 secured screw for trap door fixation
Qty
1 Cover assembly
1 Chassis
Loading...