Sabine METROTUNE MT8000 User Manual
MM
EE
TRTR
M
E
TR
EE
TRTR
MM
MT-8000
TT
OO
O
T
OO
TT
DIGITAL METRONOME
& CHROMATIC TUNER
UU
U
UU
NN
N
NN
EE
E
EE
TM
GUIDE TO USING Y OUR METROTUNE
Congratulations on purchasing a Sabine MetroTune MT-8000. The MetroTune combines everything you need from a
metronome and a chromatic tuner.
Metronome features
♦ Loud, wood-block tone, with volume control — hear
the MT-8000 over loud instruments
♦ Accented downbeat, 2 to 7 beat phrases — great for
practicing difficult parts
♦ Set tempo from 40 to 206 beats per minute
♦ Sweeping LED display makes it easy to stay on the
beat, even with the volume off
♦ Adjustable volume control
Tuner features
♦ Automatic and chromatic — perfect for intonation train-
ing
♦ Transpose to any key — MT-8000 displays the right
note for your instrument
♦ Built-in microphone
♦ Calibrate from A = 438 to 445 Hz
♦ Sweeping LED display acts like a bar graph — clearly
shows how sharp or flat you are in cents. Double green
LEDs light when you’re in tune
♦ Advanced Sabine tuning algorithm — works for most
And you also get these very cool
string and reed instruments
features...
♦ Built-in metal stand tilts the unit for
table-top viewing or mounts on
music stand
♦ Settings memory: maintains set-
tings even after powering down
Accented
Downbeats
Tempo:
beats per minute
Power Switch
♦ Super-bright LEDs for easy view-
ing
♦ Recessed on/off button: won’t ac-
cidentally turn on in your instrument case
♦ Free battery or plug-in 9V power
supply (not included)
Speaker
♦ Two-year Warranty
Up/Down Selectors:
change parameters
Buttons & Functions
ON/OFF button: P ower on and off .
FUNCTION button: Pressing the FUNCTION button puts the MetroTune into edit mode. The MetroTune remembers the
previously selected edit mode and will return to that point. While in edit mode, the appropriate Function LED will light, as
well as the current status LED for that function. Use the UP/DOWN buttons to change the parameter, or press the function
button again and scroll through all the five editable parameters: Calibrate, Transpose, Tempo, Downbeat or Volume.
After 2-3 seconds of no button action, the unit goes back to either normal tuner mode or normal metronome mode,
depending on which parameter is selected at the end of edit mode (Normal mode means you are using either the tuner
or the metronome for their main purpose). NOTE: the UP/DOWN buttons do nothing in normal mode. The flashing of the
green in-tune LEDs indicates normal tuner mode — once per second for the default A = 440 Hz/Key of C, and twice for
all other tuner parameter settings. Normal metronome mode is indicated by the sweeping metronome LEDs, moving at
whatever tempo was selected in Tempo edit mode, and the wood-block sound, set at whatever volume was selected in
V olume edit mode. NOTE: You must press the FUNCTION button each time you wish to alter metronome or tuner settings .
UP/DOWN buttons: Each click increases/decreases the value one step at a time until the maximum/minimum value is
reached.
Sweep LED display : sweeps with the
beat or indicates sharp, flat, in tune
Note / T ranspose
Indicator LEDs
Flat / Sharp in cents
Calibrate Tuner
from A=438 - 445
Jack for power
Mic
Function Selector:
choose Metronome and
Tuner functions
adapter
(not included)
Specifications
Dimensions: W = 5.9", D = 2.5", H = 1.1" (14.9 x 6.4 x
Weight: 6 oz. (170.1 grams)
Range: 12-Note Full Range Chromatic
Accuracy:
Battery: 9 Volt standard or alkaline
Tempo Range: From 40 to 206 beats per minute (39
Accented Beats: 0,1,2,3,4,5,6 and 7
Standard Pitch: 438~445 Hz (
Memory: Remembers all settings from previous
2.8 centimeters)
+ one cent (uses quartz crystal)
steps)
+ 0.5 cent accuracy)
power-off
Limited Two-year Warranty
If your MetroTune fails because of a manufacturing defect within two years from the date of the original purchase, please return it to your dealer. If you need to return the tuner to Sabine, call for a Return Authorization
number. Then send it, postage prepaid, to Sabine for
replacement with a new or reconditioned product. You
must include your full name, address, proof of purchase
and the nature of the defect. This warranty does not
cover damage
tive batteries.
caused by accident, misuse or defec-
USING THE METR ONOME FUNCTION OF YOUR MT-8000
Press the POWER button to turn on y our MT-8000. The MetroT une remembers the last Function used
and returns to that point. Repeatedly press the FUNCTION button until the Tempo LED lights. Use the UP/
DOWN buttons to select the tempo, which is displayed in the top LED row. After selecting your desired
tempo, wait 2-3 seconds until the Tempo light goes out. You are now ready to use your metronome.
Quick Start
Quick Start
How to change Tempo with your MetroTune metronome:
With the MetroTune on, use the Function button to select Tempo. As soon as you enter Tempo edit mode, the current
tempo will display (top row LEDs). Use the UP/DOWN buttons to select the desired tempo. The top row LEDs will light as
you scroll through the tempo selections. As with all other functions, the MetroTune will revert back to normal mode after
3 seconds of no button action. When two LEDs light simultaneously, the speed is indicated by the number printed
between the two LEDs.
How to adjust the Volume of your MetroTune metronome:
Scroll with the FUNCTION button until the Volume LED lights up. The metronome will continue to click during this edit
mode. Use the UP/DOWN buttons to set the MetroTune volume to high, low or mute.
How to create an Accented Downbeat with your MetroTune:
You can create an accented downbeat to indicate the beginning of a measure or phrase by scrolling the FUNCTION
button until the Downbeat LED lights up. The downbeat LEDs are labeled 0-7 in the upper left of the display. The default
is 0. The current Downbeat status will display along with the Downbeat LED. Use the UP/DOWN buttons to select no
accent (0), or from 1 to 7 beats per measure. As with all other functions, the MetroTune will revert to normal mode 3
seconds after you finish editing.
USING THE TUNER FUNCTION OF YOUR MT-8000
Press the POWER button to turn on your MT-8000. The MetroTune remembers the last Function
used and returns to that mode. When the double green LEDs are flashing once per second, you are
ready to tune. Play the note or string you wish to tune. The note name will display on the bottom row
of LEDs; the measure of how flat or sharp the note is will display in the top row of LEDs. Adjust each
note or string until the display shows "In Tune."
Quick Start
Green
In-Tune
LED Flash
Settings
1 flash per second means you are in standard A = 440 Hz pitch calibration and in the standard
concert "C" tuning (not transposed)
2 flashes per second means the tuner is in other than A = 440 Hz pitch calibration OR Transposed
to an alternate key
Quick Start
How to recalibrate your MetroTune tuner:
Use the calibrate function to tune your instrument to a pitch other than A = 440, or if you want to use alternate scales. For
example, if you wish to recalibrate the tuner from standard A = 440 Hz to A = 438 Hz, press the FUNCTION button and
scroll though the Function LEDs until the Calibrate LED is lit. Then press the UP or DOWN button until the top row note
indicator LED lights above 438. The tuner’ s scale is now shifted to that pitch. Wait 2-3 seconds, your setting will be saved
and the MetroTune will revert to nor mal mode (green In-Tune LEDs will flash two times per second). To return the tuner
to standard A = 440 Hz, choose Calibrate and use the UP/DOWN buttons to select 440. When finished, wait 2-3 seconds,
your setting will be saved and the MetroTune will revert to normal mode.
How to Transpose to a different key with your MetroTune tuner:
Use the Transpose function to transpose to a different key. This is especially useful if you are using a fretted instrument
with a capo or if your instrument is not tuned in the key of "C," such as a B-Flat trumpet or E-Flat alto sax. For example, to
transpose to Bb push the FUNCTION button and scroll until the Transpose LED lights. The current Transpose status LED
will light (default is the C LED). Push the DOWN button twice to get to Bb. When finished, wait 2-3 seconds, your setting
will be saved and the MetroTune will revert to normal mode (the green In-Tune LEDs will flash two times per second).
NOTE: to completely reset all functions to their default settings, turn the MT-8000 off, press and hold the UP and
DOWN buttons, power-up, and release the UP/DOWN buttons after 3 seconds. The green In-Tune LEDs will flash at
1 flash per second.
Intonation Training for Wind & Orchestra Instruments
Use the MT-8000 to track every note you play. Try playing a simple passage and see how close to "in-tune" each note is.
Strive to get every note as close as possible to in-tune!
Loading...