Installation Instructions
For:
Jeep® ’97 “TJ” Wrangler Header Safari Bikini Part Number 52531
To be used with or without Soundbar
To be used with or without Door Side Rails
Congratulations on your purchasing decision. Bestop designed this Convertible Top to give you years of dependability
and performance with proper care. If you encounter any problems during the installation of your Convertible Top, or at
any later date, please contact your authorized Bestop dealer or call our Consumer Response Department, Monday Friday 7AM - 5PM (MST) at 1-800-845-3567 or (303) 465-1755 in Colorado.
Note: Must be used with a TJ Header Windshield Kit Part Number 51235-01.
WARNING
This product is designed primarily to enhance the appearance of the vehicle and to shield the occupants
from ordinary weather conditions. Do not rely in any
way on the components of this product to contain
occupants within the vehicle, or to protect against
injury or death in the event of an accident. This top will
not protect the occupants from falling objects. Never
operate vehicle in excess of manufacturer’s specications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions
provided when installing top. Failure to do so may result
in a poor tting top and could place occupants of the
vehicle in a potentially dangerous situation.
52531 1
Installation Tips
Before you begin installing this Bikini top, read all
instructions thoroughly. Below are a few tips to
make this installation easier.
For a smooth t:
For ease in installation, the top should be
installed at temperatures above 72 ° F. Below
this temperature, the top may contract an inch
or more, making it dicult to t to the vehicle.
It is normal for a top to contract and wrinkle
when stored in the shipping carton. Within a
few days after the installation, the top will relax
and the wrinkles will disappear.
Safari Bikini Qty - 1
Step One
Orient the Bikini with the plastic ridge to the front and the straps toward the
back. Drape the Bikini over the sport bar and insert the plastic strip sewn
along the front of the top into the windshield header. Do not catch the fabric
in the retainer. Center the front of the deck on the vehicle so that it is an
equal distance from the top of the windshield ange on both sides.
Parts List
Plastic Strip
Make sure that only Plastic
Strip is in retainer
Note: For best possible installation,
check to make sure that the soft top is
perfectly centered on the vehicle.
Windshield
Fabric
Windshield Header
Driver's Side of Vehicle
Make sure space between
top fabric and windshield
ange is equal on both sides
52531 2
View from front
Rev. E 0309