ROTHENBERGER Befestigungs-Set Mauerwerk User Manual

Assembly instruction for fastening set art. no.: FF35121brickwork

1 2 3

M12

85mm

Ø20mm

- Drilling hole

- Carefully clean the drill dust from the
borehole

Do not use worn out ankers! !
Attention! !

Every time before start of operation make sure that the machine is firmly fastened and not able to shake

If any damage on the anker, replace with new one

When tightening the nut the cone into the anchor shells
drawn and spreads apart these and wedged itself.

- Fit in brickwork dowel

- Screw the d with washer and

iamond knurl threaded bar

mounted nut into the anker

-

Attach mounting plate of drill rig

-

Enclose washer and screw on with wing nut

ROTHENBERGER Werkzeuge GmbH · Industriestraße 7 · D-65779 Kelkheim/Germany
Tel. + 49 (0) 61 95 / 800 - 1 · Fax + 49 (0) 61 95 / 7 44 22 · [e-mail] · www.rothenberger.com

M12

06.10/F&E