ROTHENBERGER Befestigungs-Set Beton User Manual
Assembly instruction for fastening set art. no.: FF35120concrete
1 2 3
65mm
ø15mm
- drilling hole
- Carefully clean the drill dust from the
borehole
Only use suitable setting tool! Before using the setting tool, check by visual inspection! If any damage on setting tool, replace with new one!
Every time before start of operation make sure that the machine is firmly fastened and not able to shake!
ROTHENBERGER Werkzeuge GmbH · Industriestraße 7 · D-65779 Kelkheim/Germany
Tel. + 49 (0) 61 95 / 800 - 1 · Fax + 49 (0) 61 95 / 7 44 22 · info@rothenberger.com · www.rothenberger.com
- Mount dowel pin by using diamond knurl threaded bar
- expansion on anker with setting tool
- Turn the diamond knurl threaded bar into the dowel
- attach mounting plate of drill rig
- Enclose washer and screw on with wing nut
06.10/F&E
Loading...