Roland INTEGRA-7 About the Wireless LAN Function
About the Wireless LAN Function
1. Turn OFF the INTEGRA-7.
Check the version
The wireless LAN function was added in INTEGRA-7 version
1.10. If the version is earlier than 1.10, download the update
from the support page (http://www.roland.com/support/)
g Downloads g product name (INTEGRA-7) g INTEGRA-7
System Program, and update your INTEGRA-7.
* If this supplementary manual was included with a new
INTEGRA-7 you purchased, your instrument has already been
updated to version 1.10 or later; you do not need to update.
How to check the version
Select the [MENU] button g “SYSTEM” g “VERSION.”
What is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold separately)
into the INTEGRA-7’s USB MEMORY port, you’ll be able to use
wireless-compatible applications (such as the “INTEGRA-7 Editor”
iPad app).
iPad etc.
Items required to use the wireless LAN function
Wireless LAN access point
(e.g., wireless LAN router)
Wireless USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN Wireless LAN
Wireless USB Adapter (sold separately: WNA1100-RL)
Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3
iPad etc.
INTEGRA-7
2. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the INTEGRA-7’s USB MEMORY port.
3. Hold down the [VOLUME] (PREVIEW) knob and turn ON
the INTEGRA-7. When the WPS screen appears in the
INTEGRA-7’s display, release the [VOLUME] (PREVIEW) knob.
4. Perform the WPS operation on your wireless LAN access
point (e.g., hold down the WPS button on your wireless
LAN access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
5. Use the cursor buttons to select the [OK], then press the
[ENTER] button.
Once successfully connected, the status (WIRELESS STATUS) screen
(p. 2) will appear.
6. Press the [EXIT] button to return to the top screen.
You can use the wireless connection from an iPad app such as
INTEGRA-7 Editor.
NOTE
* The device (e.g., iPad) running the app must be connected to the
same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
* Connection data is not included in a backup saved in the USB
ash drive.
*1 The wireless LAN access point you use must support WPS. If your
wireless LAN access point does not support WPS, you can connect
using the procedure described in “Connecting to a Wireless LAN
Access Point That You Select (SELECT ACCESS POINT)” (p. 2).
*2 The ability to connect with all kinds of wireless LAN access points
is not guaranteed.
*3 If you’re unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode (p. 3).
Basic Connection Method (Connect by
WPS)
The rst time you connect the INTEGRA-7 to a wireless network,
you’ll need to perform the following procedure (WPS) to join the
wireless network.
This procedure is required only the rst time. (Once you’ve joined the
network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings
when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
INTEGRA-7
Icons in the display
The wireless LAN status is shown in the upper part of the
display.
Icon Explanation
1
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The wireless USB adapter is inserted, but not connected
with a wireless LAN access point.
The wireless USB adapter is not inserted (nothing is
displayed).
Ad-Hoc mode (p. 3).
* 5 1 0 0 0 3 2 3 7 4 - 0 2 *
Wireless LAN Function Settings
You can view or edit the wireless settings.
About the Wireless LAN Function
2. Perform the WPS operation on your wireless LAN access
point (e.g., hold down the WPS button on your wireless
LAN access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
Status Indication (WIRELESS STATUS)
This shows the wireless LAN status.
1. Select the [MENU] button g “WIRELESS.”
The WIRELESS STATUS screen will appear.
Display Explanation
CONNECTED
NOW CONNECTING
NOT CONNECTED
NOT AVAILABLE The wireless USB adapter is not inserted.
AD-HOC
What the function buttons do
Button Explanation
[SELECT AP]
[WPS] Move to a screen for performing WPS.
[OPTIONS]
[INFO] View the IP address and MAC address.
* Use the cursor buttons to select a function button, then press the
[ENTER] button.
Currently connected to the wireless LAN access point.
The identier (name) of the connected wireless LAN
access point is shown under the “Access Point.”
A connection with the wireless LAN access point is
being established.
The wireless USB adapter is inserted, but not
connected to a wireless LAN access point.
Ad-Hoc mode (p. 3).
The Ad-Hoc SSID and Ad-Hoc Key are shown.
For details, refer to “Connecting in Ad-Hoc mode
(Ad-Hoc Mode)” (p. 3).
Move to a screen where you can choose a wireless LAN
access point and connect to it.
Make settings for Wireless ID or Ad-Hoc mode (Ad-Hoc
Mode) (p. 3).
3. Use the cursor buttons to select the [OK], then press the
[ENTER] button.
Connection via WPS will take place.
Once successfully connected, you’ll be returned to the status
(WIRELESS STATUS) screen.
Connecting to a Wireless LAN Access Point
That You Select (SELECT ACCESS POINT)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1. Select the [MENU] button g “WIRELESS” g [SELECT AP].
The SELECT ACCESS POINT screen will appear.
• A “ ” symbol is shown for the currently-connected wireless LAN
access point.
• You can update the list by pressing the cursor [
2. Choose the wireless LAN access point to which you want to
connect, and press the [ENTER] button.
• You will be connected to the selected wireless LAN access point.
• If you’re using this wireless LAN access point for the rst
time, you’ll proceed to the authorization (AUTHORIZATION
PASSPHRASE) screen.
• If this is a wireless LAN access point to which you have connected
in the past, just press the [ENTER] button and you’ll be connected.
Once successfully connected, you’ll be returned to the status
(WIRELESS STATUS) screen.
] button.
Connecting by WPS (WPS)
Here’s how you can use WPS to connect to a wireless LAN access
point.
MEMO
You can also connect using WPS by holding down the [VOLUME]
(PREVIEW) knob and turning ON the INTEGRA-7. For the
procedure, refer to “Basic Connection Method (Connect by WPS)”
(p. 1).
1. Select the [MENU] button g “WIRELESS” g [WPS] .
The WPS screen will appear.
Authorization screen
(AUTHORIZATION PASSPHRASE)
3. Enter the security code (passphrase) of your wireless LAN
access point, and press the [ENTER] button.
For details on how to enter characters, refer to the INTEGRA-7
Owner’s Manual.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, you’ll be returned to the status
(WIRELESS STATUS) screen.
2
Loading...