R&S®TSMA6B
Autonomous Mobile Network Scanner
Supplement Image Stick
(a1XP2)
4901403202
Version 01
4901.4032.02 | Version 01 | R&S®TSMA6B
Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol , e.g. R&S®TSMA6 is indicated as
R&S TSMA6.
R&S®TSMA6B
1.1 Create a R&S TSMA6B image stick............................................................................. 3
1.2 Boot from the R&S TSMA6B image stick....................................................................4
1.3 Capture an image from a R&S TSMA6B......................................................................4
1.4 Apply an image to a R&S TSMA6B..............................................................................6
1 Usage of the R&S TSMA6B image stick
Contents
Create a R&S TSMA6B image stick
Contents
1 Usage of the R&S TSMA6B image stick...............................................3
2 Contacting customer support...............................................................8
With the R&S TSMA6B image stick, you can capture images from and apply images to
another R&S TSMA6B.
● Create a R&S TSMA6B image stick..........................................................................3
● Boot from the R&S TSMA6B image stick..................................................................4
● Capture an image from a R&S TSMA6B...................................................................4
● Apply an image to a R&S TSMA6B...........................................................................6
1.1 Create a R&S TSMA6B image stick
You need administrator rights on the PC, where you create the image stick.
To create a R&S TSMA6B image stick, proceed as follows.
Prerequisites:
●
A bootable USB stick (USB 3.1 Gen1) with a capacity of at least 64 GB. Make sure
that the data on the USB stick is no longer needed as it will be formatted during
process of R&S TSMA6B image stick creation.
●
Download the "R&S TSMA6B Image Stick" (TSMA6B_ImageStick-v<x.y>.zip)
tool (www.rohde-schwarz.com/software/tsma6b).
●
On a PC, unzip the file TSMA6B_ImageStick-v<x.y>.zip to a directory of your
own choice. The extracted directory contains the PrepareWinPEStick.exe file.
1. Insert the USB stick into a free USB3.1 port of a PC.
2. Execute the PrepareWinPEStick.exe file in the directory, where you have
saved the file.
3Supplement Image Stick 4901.4032.02 ─ 01
Loading...