R&S®TSMA6
Autonomous Mobile Network Scanner
Supplement Resizing Backup
Partition
(a0èÃ2)
4900905302
Version 02
Supplement Resizing Backup Partition
R&S®TSMA6
Contents
Contents
1 Affected Devices.................................................................................... 2
2 Problem Description..............................................................................2
3 Verify Backup Partition Size..................................................................3
4 Resize Backup Partition Size................................................................4
1 Affected Devices
This supplement is only relevant for R&S TSMA6 devices (4900.8005K02) with a serial
number < 101146.
The supplement has to be applied only, if the creation of a user backup from the
R&S TSMA6 web GUI is not possible (see Chapter 2, "Problem Description",
on page 2)..
2 Problem Description
The creation of a backup is not possible, because the "Backup" button is not displayed.
The root cause for a missing "Backup" button is most probably not enough disk space
in the backup partition.
2Supplement Resizing Backup Partition 4900.9053.02 ─ 02
R&S®TSMA6
Verify Backup Partition Size
3 Verify Backup Partition Size
To verify the size of the backup partition, proceed as follows
1. Open the Disk Management.
Use <Windows> + <R> to open "Run", type diskmgmt.msc in the empty box and
click "OK".
2. Verify partition size of "Backup Image".
3. If the capacity of the "Backup Image" ≤ 11 GB, proceed with Chapter 4, "Resize
Backup Partition Size", on page 4.
If the capacity of the "Backup Image" ≥ 80 GB, no further action required.
3Supplement Resizing Backup Partition 4900.9053.02 ─ 02
Loading...