External Dynamic Brake Kit (CNM-R2-019P600)
L1 L2 L3
1
I
Installation Instructions
2
0V
mm
(in.)
O
31.0
(1.22)
61.0
(2.40)
CUS
AUTOMATION
ROCKWELL
216.0
(8.50)
DC+
DC–
59.0
(2.32)
0V
235.0
(9.25)
CNM-R2-019P600
3
M5 × 0.8
(#10-24)
AC Drive
50.8 mm
( 2.0 in.)
2 Installation Instructions
4
AC Drive
5
(Input Contactor) M
Three-Phase
AC Input
AC Drive
BR1
BR+
ATTENTION:
Resistor temperature may exceed
!
200 degrees C.
Application Cross-Reference
Drive and
Motor Size
kW (HP) Part Number
100-120 Volt AC Input Drives
BR2
BR-
Resistance
Ohms ±5%
Continuous
Power
kW
Thermostat
Connectors
(when present)
!
Max Energy
kJ
R (L1)
S (L2)
T (L3)
Power Off
Power Source DB Resistor Thermostat
Power On
M
M
ATTENTION: AC drives do not offer protection for externally mounted
brake resistors, especially in the case of brake IGBT failure. A risk of fire
exists if external braking resistors are not protected. External resistor
packages must be protected from over temperature or the protective
circuit shown, or equivalent, must be supplied.
Max Braking
Tor qu e
% of Motor
Application Type 1 Application Type 2
Braking Torque
% of Motor
Duty Cycle%Braking Torque
% of Motor
Duty Cycle
%
200-240 Volt AC Input Drives
400-480 Volt AC Input Drives
Note 1 CNM-R2-019P600 19 0.600 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1
600 Volt AC Input Drives
Note 1: Application specific.
www.rockwellautomation.com
Power, Control and Information Solutions Headquarters
mericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
sia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Publication RA-IN020B-EN-P – August, 2006
Supersedes RA-IN0020A dated May, 2006 Copyright © 2006 Rockwell Automation, Inc. All rights reserved. Printed in USA.