Rockwell Automation 599-PL00x User Manual
Accessory Kit Installation Instructions
(Cat 599-PB00, -PL00_, -SS00)
ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing. Install
in suitable enclosure. Keep free from contaminants.
ATTENTION: Wire leads must approach from the side, as shown, to ensure adequate electrical clearance to
mounting hardware.
Push Button / Selector Switch Kit
B
To Terminal "3"
on Starter
(For 2-Position
Selector Switch)
To Terminal "3"
on Starter
(For 3-Position
Selector Switch)
B
B
B
A
To
Terminal "L1"
on Starter
To
Terminal "3"
on Starter
B
A
To Terminal "L1"
on Starter
A
B
12 lb-in
To Terminal "2"
on Starter
Single - Phase
3 - Phase
Spacer - Shallow Cover
A
Spacer - Deep Cover
( 3 - Phase Only)
A
3 - Phase
A
Single - Phase
( 3 - Phase Only)
20 lb-in
A
Pilot Light Kit
20 lb-in
A
A
A
Single - Phase
3 - Phase
A
To Coil
A
Spacer - Shallow Cover
Spacer - Deep Cover
( 3 - Phase Only)
Terminals
( 3 - Phase Only)
A
3 - Phase
A
Single - Phase
42052-127-01(1)
Printed in U.S.A.
Loading...