Rockwell Automation 140G-G-TLCxtion User Manual [fr, de, en]
140G-G-TLC_, 140G-H-TLC_, 140G-I-TLC_, 140G-J-TLC_
Cu/Copper terminal lug installation 140G-G, 140G-H, 140G-I, 140G-J
Terminali anteriori per cavi in rame (Cu)
Cu/
Vorderseitige Anschlüsse für Kabel aus Kupfer (Cu)
Cu/
Prises avant pour câbles en cuivre (Cu)
Cu/
Terminales frontales para cables de cobre (Cu)
Cu/
Installation - Installazione - Instalación
Instalação - -
WARNING:
installing or servicing. Install in suitable enclosure. Keep free from contaminants.
(Follow NFPA70E requirements).
AVVERTENZA: Per prevenire infortuni, togliere tensione prima dell'installazione o
manutenzione. Installare in custodia idonea. Tenere lontano da contaminanti.
(Seguire i requisiti NFPA70E).
WARNUNG:
Vermeidung von elektrischen Unfällen trennen. Die Geräte müssen in einem
passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden. (Befolgen
Sie die Anforderungen nach NFPA70E).
AVERTISSEMENT:
secteur pour éviter toute décharge. Prévoir une mise en coffret ou armoire appropriée.
Protéger le produit contre les environnements agressifs. (Vous devez respecter la
norme NFPA70E).
ADVERTENCIA: Desconéctese de la corriente eléctrica, antes de la instalación o
del servicio, a fin de impedir sacudidas eléctricas. Instálelo en una caja apropiada.
Manténgalo libre de contaminantes. (Cumpla con los requisitos NFPA70E).
ATENÇÃO: Para evitar choques, desconectar da corrente elétrica antes de fazer a
instalação ou a manutenção. Instalar em caixa apropriada. Manter livre de
contaminantes. (Cumpra as exigências da norma NFPA70E).
To prevent electrical shock, disconnect from power source before
Vor Installations- oder Servicearbeiten Stromversorgung zur
Avant le montage et la mise en service, couper l'alimentation
140G-G 140G-I
Bul. 140G/140MG
1
CLACK
DIR 1000719R0807 (L6363)
140G-H 140G-J
1
CLACK
140G-G 140G-H 140G-I 140G-J
3p 4p 3p 4p 3p
CH 4 mm CH 4 mm CH 5 mm CH 5 mm
3 4 3 4 3 4 3 4
3 4
/ /
/ / / / / /
3 4 3 4 3 4
4p
3p 4p
1
mm
2
AWG
MIN 2.5 14
MAX 70 1/0
MIN 2.5 14
MAX 95 1/0
MIN 6 10
MAX 185 250
CABLE
2
2
140G-G
3
1
2
140G-H
4
CH 4 mm
140G-I
1
140G-J
CH 4 mm 140G-H
CH 5 mm 140G-I
140G-J
Ø MAX A
1
61.95 lb-in 7 Nm
MINB
140G-G /
140G-H ≤ 1/0 AWG or < 50mm² 61.95 lb-in 7 Nm
140G-H ≥ 50mm² 75.23 lb-in/8,5 Nm
2
123.91 lb-in 14 Nm
140G-I /
140G-J 123.91 lb-in/14 Nm
/
140G-G 140G-H 140G-I 140G-J
A 12 (0.47") 14 (0.55") 18 (0.71") 18 (0.71")
B 12 (0.47") 14 (0.55") 20 (0.78") 20 (0.78")
3
140G-G
140G-H
140G-I, 140G-J
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 140G-IN092A-MU-P - April 2013
DIR 1000719R0807 (L6363)
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved.
Loading...