RocketFish RF-MAB2 User Manual
Bluetooth Stereo Headset
RF-MAB2
QUICK SETUP GUIDE
Congratulations on your purchase of the Rocketfish
Mobile Bluetooth Stereo Headset. Listen to music
wirelessly with Bluetooth audio devices and answer phone
calls hands-free. You can use the headset to answer and
make calls and to play music stored on your cell phone.
Featur es
Logo
with LED
Receiver
Receiver
Package contents
• Bluetooth Stereo Headset
• A/C wall adapter
• USB charging cable
• Quick Setup Guide
• User Guide
Turning the headset on and off
• To turn the headset on or off, press and hold
the Power button for three seconds.
Pairing the headset
1 Turn off the headset, then press and hold Talk for six
seconds. Pairing mode is activated.
2 On your cell phone, select RF-MAB2 from the list of
discovered Bluetooth devices, then enter the
password 0000 to pair the headset. For more
information on pairing Bluetooth devices to your
cell phone, see the phone’s documentation.
Note: After your headset has been successfully paired with
your cell phone, the headset will automatically
connect to the phone the next time the headset is
turned on near the phone.
Volum e
Play/Pause
Power/Talk
USB port
/
Microphone
Making phone calls
To: Do this:
Voice dial Press Talk once. (Some
phones might not support
this feature.)
Redial Press Talk twice.
Answer a call Press Talk once.
End a call Press Talk once.
Refuse a call While your phone is ringing,
press Play/Pause.
Change the volume Press + or – .
Transfer a call between Double-click Talk.
connected devices
Playing music
To: Do this:
Play/Pause Press || to launch the
phone’s MP3 player and
begin playing music.
Press || to pause and
resume playback. Press and
hold || stop playback.
Select a song Press and release or .
Rewind or While music is playing,
fast forward a song press and hold or .
(Some phones may not
support this feature.)
Answer a call while Press Talk , or press || to
playing music reject the call. Press Talk
again to end the call. Music
resumes playing after a call
is rejected or ended.
Change the volume Press + or – .
Using 3D sound
To enable 3D sound while in music playback mode, press
|| twice to select the next 3D sound effect from the
available effects. Five types of 3D sound effects are
programmed in the order below.
• Normal—No 3D sound effect. (Two beeps
indicate Normal mode.)
• Provides a comfortable and persistent
listening environment by removing
distracting sounds.
• Delivers a natural and soft 3D sound field
effect simulating that of a live performance.
• Provides a panoramic 3D audio image of
widely spread main vocal and center-placed
instruments.
• Delivers a wide stereo sound image and
but enhances low-frequency sound to
provide rich and deep bass tones.
Resetting the headset
• To reset the headset, press Play, Tal k, and
Volume up simultaneously.
LED indicator messages
Headset Status LED Status
Power on Blue LED is on
Turning off Red LED dims and disappears
Low battery Red LED blinks continuously
Recharging Red LED stays on
Recharging complete Blue LED stays on
Pairing mode Blue and red LEDs flash rapidly
Connection complete Blue LED blinks every
two seconds
Receiving a call Blue LED flashes rapidly
Talking on the phone Blue LED brightens and
dims repeatedly
Specifications
Bluetooth version: 2.1
Supported profiles: A2DP, AVRCP, HFP, HSP
Frequency spectrum: 2.4~2.4835 GHz
Working distance: Maximum 33 feet (10 m)
Operating temperature: 14~140° F (-10 ~ 60° C)
Operating time: Voice: 14 hours; music:
12 hours
Standby time: 340 hours
Size: 6 × 5.4 × 2.4 inches
(153 × 138 × 60 mm)
Weig ht: 1.9 oz (54 g)
Average charging time: 3 hours
Notes
For specifications, legal notices, warranty, and
instructions for multiple Bluetooth pairings, see your
online User Guide.
Tell us what you think!
Please go to www.bestbuy.com
and write your review for this product.
© 2009 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ENGLISH 09-0995
Loading...