RocketFish RF-LTRMS User Manual
Wireless Laser Notebook Mouse
RF-LTRMS
User Guide
Rocketfish RF-LTRMS
Wireless Laser Notebook
Mouse
Contents
Introduction ................................................................. 2
System requirements................................................ 3
Using the mouse ........................................................ 3
Troubleshooting......................................................... 9
Specifications.............................................................11
Legal notices ..............................................................11
Introduction
Congratulations on your purchase of a Rocketfish laser
notebook mouse! Your Rocketfish mouse is sensitive to any
movement, making it easy for you to control the on-screen
pointer. It’s also easy to set up, and its self-storing USB
receiver makes it convenient for travel anywhere. This
ergonomically designed mouse uses a radio frequency (RF)
link that lets you to use the mouse anywhere within range of
its receiver. No line-of-sight is required between the mouse
and its receiver.
In addition to this User Guide, this package contains:
• Wireless laser mouse
•USB RF receiver
• 2 AAA batteries
•Carrying pouch
2
System requirements
Hardware
• PC with a Pentium processor (or equivalent)
•USB port
Operating system
• Microsoft® Windows® 98SE/Me/2000/XP and Mac
Using the mouse
Installing the batteries
To install the batteries:
1 Press the battery cover release button, then slide the
battery cover off the mouse.
Battery cover
release button
RF-LTRMS
3
2 Insert batteries into the battery compartment. Make sure
that the positive (+) and negative (-) ends of each battery
match the diagrams inside the battery compartment.
3 Slide the battery cover back onto the mouse.
Removing the receiver from the mouse
The USB RF receiver is conveniently stored on the bottom of
the mouse.
4
To remove the receiver from the mouse:
1 Pull the receiver away from the receiver holder.
Receiver holder
Receiver
2 Press the receiver holder into the mouse, then slide the
receiver lock against the holder to lock it into place.
Receiver holder
Receiver lock
Connecting the receiver to the computer
To connect the mouse receiver to the computer:
• Plug the USB receiver into an available USB port on your
computer. The receiver’s LED turns red, and your
computer identifies the receiver and begins installing the
default driver.
Important: If a message or dialog box appears on the
screen, follow the on-screen prompts to complete the driver
installation.
RF-LTRMS
5
Loading...