High Performance Vacuum Pump
Model 15401/15601/15603/15605 |
|
Operating Manual.......................................... |
2 |
Bombas de Vacío de Alto Rendimiento
Modelo 15401/15601/15603 |
|
Manuel del Operador.................................... |
8 |
Pompe à Vide à Haut Rendement |
|
Modèle 15401/15601/15603 |
|
Manuel d’utilisation...................................... |
16 |
Hochleistungs-Vakuumpumpe
Modelle 15401/15601/15603 |
|
Bedienungsanleitung................................... |
24 |
Operating Manual
2
Table of contents |
|
Robinair® high performance |
|
vacuum pumps...................................................... |
2 |
Pump components................................................ |
3 |
Warnings .............................................................. |
3 |
Before using your vacuum pump.......................... |
4 |
To use the gas ballast feature............................... |
5 |
To shut down your pump after use........................ |
5 |
To maintain your high vacuum pump.................... |
5 |
Vacuum pump oil.............................................. |
5 |
Oil change procedure....................................... |
5 |
Cleaning your pump......................................... |
5 |
Motor lubrication .............................................. |
5 |
Troubleshooting guide........................................... |
6 |
Failure to start....................................................... |
6 |
Oil leakage....................................................... |
6 |
Failure to pull a good vacuum.......................... |
6 |
Pump specifications.............................................. |
6 |
Replacement parts................................................ |
7 |
Warranty coverage................................................ |
7 |
Out of warranty................................................. |
7 |
For use on A/C-R systems using CFCs, HCFCs and HFCs in conjunction with mineral oil, ester oil, alkylbenzene oil and PAG oil as lubricants. Not for use with ammonia or lithium bromide systems. Not for use with flammable refrigerants.
Robinair® high performance vacuum pumps
Congratulations on purchasing one of Robinair’s top quality vacuum pumps. Your pump has been engineered specifically for air conditioning and refrigeration service, and is built with Robinair’s proven offset rotary vane for fast, thorough evacuation.
You’ll appreciate these key features . . .
Iso-ValveTM
Allows the pump to be shut off while still connected to the A/C-R system, which is handy for checking rate of rise. With the valve handle in the OPEN position, the pump is open to the system being evacuated.
In the CLOSE position, the pump is isolated from the system. This minimizes pump oil pulled into the pumping module, making start-up easier and reducing wear and tear on the pump components.
High vacuum rating
The two-stage, offset rotary vane design provides powerful, quiet, high vacuum capability and ensures moisture removal, while the high pumping capacity reduces evacuation time.
Lifetime filtration
The intake filter prevents foreign matter from entering the pumping chamber, and an internal exhaust filter separates oil vapor from the exhaust flow.
Directed exhaust
The exhaust is expelled through the handle to direct it away from the service technician.
Gas ballast
A precise amount of atmospheric air is introduced into the pump, preventing condensation of moisture vapor and helping maintain the purity of the pump oil. By using the gas ballast, the pump operates more efficiently and pump life is extended.
Sure-grip handle
The one-piece, molded handle makes it easy to carry the pump to and from job sites, and the handle stays cool to the touch during operation.
Compact design
The pump measures approximately 40 cm long, while aluminum housing and offset rotary vanes keep the pump weight low, making it easy to carry.
11 |
12 |
1 |
|
||
|
|
2 |
|
|
3 |
10 |
|
4 |
9
5
8
7 6
Pump Components
1.Intake Fitting
2.Gas Ballast Valve
(located beside handle base)
3.Oil Fill Port
4.Sight Glass
5.Die-Cast Aluminum Housing
6.Oil Drain
7.Molded Polycarbonate Base
8.Iso-ValveTM
(isolates the pump from the system)
9.High Torque Motor
10.Power Switch
11.Through-the-Handle Exhaust
12.Sure-Grip Handle
Warnings
Wear goggles when working with refrigerants. Contact with refrigerants may cause injury.
Incorrect use or connections may
cause electrical shock. Study and follow the instructions carefully. and take precautions to avoid electrical shock hazards. All associated devices must be grounded before energizing circuits.
The normal operating temperature will cause certain external portions of 
the pump to be hot to the touch. Do not touch the pump housing or motor during operation.
NOTICE: Airborne Noise Emissions
This equipment has been tested for airborne noise emission per the Council Directive for Machinery (89/392/EEC) Section 1.7.4 Instructions — Essential Health and Safety Requirements.
Sound levels do not exceed 80dB(A) actual value.
116292 Rev. F June 18, 2013
Manual Operating
3
Loading...