Rivera Primo PP-106-5 User Manual

INSTALLATION INSTRUCTIONS FOR

PP-106-3 AND PP-106-5 (CLUTCH COVER)

The PP-106-3 or 106-5 clutch covers install
directly onto the clutch hub studs and replace
the steel pressure plate. The cover must be
tightened down to compress the clutch
springs the same as the pressure plate would
approximately 3 full turns. Measure the edge
of the PP-106-3 or 106-5 at three different
places to ensure that the cover is tightened
down equally for best clutch operation.

PRIMO BELT DRIVES

12450 Whittier Blvd WHITTIER, CA 90602

[phone] FAX [phone] E-mail [e-mail]

PP-106-3

Improve the appearance of your open primary clutch by installing show-polished clutch dome. The dome protects pantleg from the spin­ning clutch.

PP-106-3

...3 fingered clutch hub (polished)

PP-106-5

...5 fingered clutch hub (polished)

PP-106-5