Rivera Primo B4 Guard User Manual

BRUTE IV

optional safety guard

INSTALLATION INSTRUCTIONS

Do not operate or ride any motorcycle equipped with an “open” belt drive without an

appropriate safety guard or shroud installed.

Apply one(1) drop of “Blue” threadlock to the

stand-off studs.

Tighten these bolts & torque to 29 foot pounds.

Optional Brute IV accessories.

optional Billet Aluminum Guard

(chrome PP-411-C or polished PP-411)

Kick-stand stop

PP-401

optional Chrome cover

PP-106-4

Tighten studs solidly in place. If your kit included 5/16” studs torque to 29 foot pounds. If your kit came with 3/8” studs, torque to 47 foot pounds.

Studs are ready for the guard.

Apply one(1) drop of “Red” threadlock to the

Allen bolts that hold the guard in place.

Rivera Primo

Rivera Primo 12450 Whittier Blvd. Whittier, CA 90602 Tel: (562) 907-2600 Fax: (562) 907-2606

www.riveraprimoinc.com

For the following full coverage belt guards: PP-419-P-AY & PP-420-P-AY / For the following smooth center-guards: PP-411B, PP-411B-P-AY, PP-411B-C-AY, PP-611B, PP-611B-P-AY, PP-611B-C-AY and slotted center-guards PP-411-P-AY, PP-411-C-AY, PP-611-P-AY, PP-611-C-AY.

2108-0007