Ricoh SR3180 Field Service Manual
Internal Finisher SR3180
Machine Code: D766
Field Service Manual
July, 2014
Subject to change
Revision Lists
Version Section Details
1.00 -
1.10 -
Initial release of this document.
Created for D146 series.
Revised all sections according to the
release of D197 series
Read This First > Safety and Symbols Changed some icons.
Replacement and Adjustment
> Finisher Front Cover
> Finisher Upper Cover
> Control Board
> Paper Output Cover
> Transport Motor
> Junction Solenoid Motor
> Shift Motor
> Paper Output Pressure HP Sensor
Replacement and Adjustment >Entrance Sensor
Deleted some steps.
• Deleted some steps.
Added items needs to be
•
removed in Step 3
Replacement and Adjustment > Exit Paper
Pressure Motor
Replacement and Adjustment > Side-to-Side
Registration Sensor
Replacement and Adjustment > Shift Home
Position Sensor
Replacement and Adjustment > Paper Output
Sensor
Modified some steps.
• Deleted some steps.
Modified items need to be
•
removed in Step 2.
• Modified Step 8.
• Deleted some steps.
Modified items need to be
•
removed in Step 3.
1
Version Section Details
Replacement and Adjustment > Junction
Solenoid Motor HP Sensor
Modified items need to be removed in
Replacement and Adjustment > Paper Output
Full Sensor 1 / Paper Output Full Sensor 2
(Staple)
Replacement and Adjustment > Stapler Unit Modified the Procedure.
Step 2.
2
Safety and Symbols
This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations
are as follows:
Clip ring
Screw
Connector
Clamp
SEF Short Edge Feed
LEF Long Edge Feed
[A] Short Edge Feed (SEF)
[B] Long Edge Feed (LEF)
Trademarks
Microsoft®, Windows®, and MS-DOS® are registered trademarks of Microsoft Corporation in the
United States and /or other countries.
PostScript® is a registered trademark of Adobe Systems, Incorporated.
PCL® is a registered trademark of Hewlett-Packard Company.
Ethernet® is a registered trademark of Xerox Corporation.
PowerPC® is a registered trademark of International Business Machines Corporation.
Other product names used herein are for identification purposes only and may be trademarks of their
respective companies. We disclaim any and all rights involved with those marks.
3
TABLE OF CONTENTS
Revision Lists........................................................................................................................................................1
Safety and Symbols............................................................................................................................................3
Trademarks.....................................................................................................................................................3
1. Replacement and Adjustment
Internal Finisher SR3180...................................................................................................................................5
Finisher Front Cover............................................................................................................................................7
Finisher Upper Cover.........................................................................................................................................8
Paper Output Tray..............................................................................................................................................9
Paper Output Cover.........................................................................................................................................10
Rear Cover........................................................................................................................................................11
Control Board...................................................................................................................................................12
Entrance Sensor................................................................................................................................................13
Transport Motor...............................................................................................................................................14
Shift Motor........................................................................................................................................................15
Junction Solenoid Motor..................................................................................................................................16
Exit Paper Pressure Motor...............................................................................................................................17
Side-to-Side Registration Sensor.....................................................................................................................19
Open/Close Door Switch...............................................................................................................................21
Shift Home Position Sensor..............................................................................................................................22
Paper Output Sensor........................................................................................................................................23
Paper Output Pressure HP Sensor...................................................................................................................24
Junction Solenoid Motor HP Sensor...............................................................................................................25
Paper Output Full Sensor 1 / Paper Output Full Sensor 2 (Staple).............................................................26
Stapler Unit.......................................................................................................................................................27
Stapler Drive HP Sensor..................................................................................................................................30
Stapler Motor...................................................................................................................................................31
4
1. Replacement and Adjustment
Internal Finisher SR3180
1. Interface cable [A].
2. Paper output tray [A] ( ×2).
5
1. Replacement and Adjustment
3. Cover [A] ( ×2).
4. Screw on the Finisher [A] ( ×1).
5. Finisher [A].
6
Finisher Front Cover
1. Paper output cover (page 10).
2. Finisher front cover [A] ( ×2).
Finisher Front Cover
7
1. Replacement and Adjustment
Finisher Upper Cover
1. Finisher front cover (page 7).
2. Finisher upper cover [A] ( ×1).
8
Paper Output Tray
1. Paper output tray [A] ( ×2).
Paper Output Tray
9
Loading...