Ricoh kc1fax Technical Bulletin
!"#$% T
echnical Bulletin
PAGE: 1/1
Model:
Subject:
From:
Kir-C
Power Failure Report
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
23-May-01
Prepared by:
No.:
RB040002
M. Mano
Action required
Service manual revision
Retrofit information
The following error was found on the Power Failure Report for the Kir-C1 Fax option:
Sample:
* * * Power Failure Report ( 30. May. 2001 17:55) * * *
FAX HEADER: RICOH GTS
This file has been erased after switch off.
Power Failure time: 17:55
0079 17:55 RX
! The 5th line (File, Time, Mode etc.) is not listed on the report
The report should look like this:
* * * Power Failure Report (30. May. 2001 17:55) * * *
FAX HEADER: RICOH GTS
This file has been erased after switch off.
Power Failure time: 17:55
File Time Mode Destination Result
0079 17:55 RX
This correction will be applied from the first lot of June 2001 production.
!"#$% T
echnical Bulletin
PAGE: 1/1
Model:
Subject:
From:
Kir-C
ROM History (Kir-C1 Fax Option)
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
06-Jun-01
Prepared by:
Firmware history for the Kir-C1 Fax Option.
NA
B4045582 Version C.SUM Production
B 01.12.00 7265 1st Mass Prod.
C 03.06.00 C968 June Prod. ‘01
Europe
No.:
RB040006
M. Mano
Action required
Service manual revision
Retrofit information
B4045584 Version C.SUM Production
C 01.14.00 F758 December Prod. ’99
D 03.06.00 9923 June Prod. ‘01
Asia
B4045587 Version C.SUM Production
02.06.00 CC81 1st Mass Prod.
A 03.06.00 B99C June Prod. ‘01
Symptom Corrected
Nothing is displayed in the Dedicated Transmission
USA EU Asia
-D-
Parameter screen when Finnish has been selected as the
display language.
The colon (“:”) is not displayed between the switch number
CD“ “
and bit string for User Parameter SW 18 onward.
Titles are not listed in the Power Failure Report (e.g. File,
CDA
Time, Mode). Please see related RTB# RB040002.
When system switch 1E bit 2 (RTI/CSI display priority) = 1
!
(CSI), the machine displays “
” at the end of the other
CD“ ”
terminal’s CSI.
e.g. +813123456789
!
Loading...